hama 176566 Wi-Fi Indoor Camera Instruction Manual

hama 176566 Wi-Fi Indoor Camera

 **Instruction Manual**

Operating Instructions

Controls and displays

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

1. Explanation of warning symbols and notes

Risk of electric shock

This symbol indicates a risk of electric shock from touching product parts carrying hazardous voltage.

Warning

This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note

This symbol is used to indicate additional information or important notes.

2. Package contents:

• 1 WiFi Indoor Camera
• 1 power supply unit for camera
• 1 adhesive point
• 1 quick reference guide

3. Safety instructions

• Protect the product from dirt, moisture and overheating and use it in dry environments only.
• This product is intended for private, non-commercial use only.
• Use the product only for the intended purpose.
• Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
• Do not use the product in areas in which electronic products are not permitted.
• Do not drop the product and do not expose it to any major shocks.
• Do not modify the product in any way. Doing so voids the warranty.
• Keep the packaging material out of the reach of children due to the risk of suffocation.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Do not operate the product outside the power limits specified in the technical data.
• Only use the article under moderate climatic conditions.
• Do not mount the product above locations where persons might sit or stand.
• Before mounting, check that the wall you have chosen is suitable for the weight to be mounted. Also make sure that there are no electric, water, gas or other lines running through the wall at the mounting site.
• Pay attention to the applicable data protection regulations before installing and using the product.
• Respect the personal and property rights of others. Do not make recordings of other people with the camera.
• Observe the right to one’s own image and spoken word when recording.
• As with all electrical products, this device should be kept out of the reach of children.

Risk of electric shock

• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the AC adapter, the adapter cable or the mains cable are damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

4. Product characteristics

Our WiFi outdoor camera is used to monitor the area in which you install it. You can use the Hama Smart Home (Solution) app to access the images of the monitored location conveniently at any time.

• The following voice commands are available for voice assistants with a display (Amazon Echo Show, Google Nest, etc.):
  “Alexa/OK Google, show me camera (plus the name of the camera you have defined)”

5. Installation

• You can secure the camera into place using the adhesive pads or mounting kit supplied.

Warning – installation with adhesive

• Be aware that the intended mounting surface must be free from dust and grease. Use a suitable cleaner from a specialist retailer for this.
• Be aware that the adhesive pads are intended to be permanent. Carefully pull the adhesive pad off the mounting surface to remove it.
• Various environmental influences, such as moisture in the air, sunlight, cold, etc., can impair the long-term stickiness of the adhesive pads.
• Possible residue on the mounting surface after removal of the adhesive pads cannot be ruled out!

Warning – mounting kit

• Do not mount the product above locations where persons might sit or stand.
• Before mounting, check that the wall you have chosen is suitable for the weight to be mounted. Also make sure that there are no electric, water, gas or other lines running through the wall at the mounting site.

6. Integrating devices into the app Hama Smart Home (Solution)

Warning

• Only operate the product from an approved socket that is connected to the public power supply. The socket must be installed close to the product and must be easily accessible.

• Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.

• If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.

• If you will not be using the product for a prolonged period, disconnect it from mains power

• Connect the camera to a properly installed socket.

• The LED on the camera starts to flash quickly. If it does not, press and hold the Reset button (4) on the camera for around 5 seconds.

• Open the app and sign in.

• Press the + in the top right-hand corner to add a new device.

• Choose Cameras from the list.

• Now confirm that the camera’s LED is flashing quickly by ticking “Next step” and clicking on “Next”. Ensure that the QR code is at the top right.

• Next enter your WiFi password and confirm with NEXT. Now scan the QR code with the camera from a distance of around 15 – 20 cm.

• As soon as you hear a signal sound, click “Signal sound heard”.

• Your camera is now connected.

• Once the connection is successful, the LED stops flashing quickly and the app confirms that your camera is connected. You can now assign it a different name if you wish.

• Click Finish to end the process.

• You can now operate and configure the camera.

Note

A detailed description of the Hama Smart Home (Solution) App and its full scope of functions can be found in our App Guide at:

www.hama.com ⇒ Article Number ⇒ Downloads ⇒ App Operating Instructions

Note: Pairing restart

First remove the rubber protector on one side of the camera. Now press the Reset button with a needle or another thin object until a signal sound is heard. As soon as the LED starts to flash red, you can start a further pairing attempt.

7. Setting options

The following settings can be made in the app:

8. Extended usage options with scenarios

Scenarios and automated sequences that can be created in the app allow various combination options and usage options for these products, depending on the Smart Home products in your home.

Programming is always via the app (see Section 7 of the App Guide) and will be offered / suggested to you on an individual basis.

Standard usage option

Extended usage option

9. Technical data

10. Care and maintenance

Note

Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

• Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning products.
• Ensure that no water is able to enter the product.

11. Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/ mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

12. Declaration of conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00176566] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www.hama.com->00176566 ->Downloads.

Hama GmbH & Co KG
86652 Monheim/Germany

Service & Support

www.hama.com
+49 9091 502-0

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

References

• hama.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>