TECHPICCO 2022-2024 Universal License Plate Frames Front License Plate Bracket Installation Guide
- June 20, 2024
- TECHPICCO
Table of Contents
Installation Guide
DIAGRAM
STEP 1: Assembly the grille mount BODY.
Stick foam pads on the BODY backing, pre-install M6X50 countersunk bolts,
washers and grille clamps.
STEP 2: Mount the BODY on your vehicle grille.
Find a suitable mounting location on your vehicle’s grille, attach the clamps
to the back of the grille and tighten countersunk bolts. (DO NOT OVERTIGHTEN)
STEP 3: Install the extension studs.
(Optional) 2 pair optional M5x32 extension studs, up to 6.4 cm extension
length available.
STEP 4: Install the backing plate.
Use two M5x12 screws and washers to secure backing plate on the BODY/STUDS,
backing plate slot design allows angle adjustment as well as vertical and
horizontal adjustment.
STEP 5: Mount your license plate.
Mount your license plate on the backing plate with 4 provided M5x12 screws.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>