LUMASCAPE LS3330 Erden Brass EB3 Instruction Manual

LUMASCAPE LS3330 Erden Brass EB3

Important Notes

• Avoid applying downward force on the luminaire.
• Keep the luminaire away from flammable materials.
• Read and follow all safety instructions carefully to avoid voiding the warranty.

Wiring Designations

The wiring color designations are as follows:

• PowerSync (3-Core): Red, Black, Orange

Safety Instructions

• Ensure compliance with local electrical rules and regulations.
• All electrical work must be performed by a licensed electrician.
• Use protective earth and protective group (symbol 7).
• For specific LED options, refer to the energy efficiency class mentioned in the instructions.
• Handle the luminaire with care as it may become hot during operation.
• Install the luminaire with its protective shield intact.

FAQ

Q: Can I install the luminaire without a protective shield?

A: No, the luminaire should only be used complete with its protective shield to ensure safe operation and compliance with safety standards.

Q: What is the recommended ambient temperature for installation?

A: Please refer to the instructions for specific ambient temperature recommendations based on the installation environment.

PRE-INSTALL

SPECIFICATIONS

• MODEL: LS3330
• PART NUMBER: LS3330 – 15D xxx x D xx xx x 23 Q xx PS x
• INSTALLATION TYPE: IN-GROUND/IN-GRADE: PRE-INSTALLATION
• IP RATING: IP68
• SUPPLY VOLTAGE: 30 to 48 Vdc
• INSTRUCTIONS COVER: PowerSync™
• DIMENSIONS (LxWxH): Refer to included drawings
• WEIGHT: 6.2 lb (2.8 kg)
• AMBIENT TEMPERATURE: -4ºF to 122ºF (-20ºC to 50ºC)
• STATIC LOAD RATING: 2,866 lb (1,300 kg)

Tools Required

Included Components

SYMBOLS

• No Downward Force
• Do Not Overtighten
• Do Not Use Power Tools on Screws
• Keep Electronics Free From Dirt and Moisture
• Keep Away from Flammable Materials
• Do Not Hose or Pressure Clean
• Do Not Use Silicone On Outside Surface
• Do Not Cut Cable to the Luminaire

Legend Key

Installation Instructions

Wiring Designations

PowerSync (3-Core)

Designation Color

• + DC Red
• – DC Black
• Data Orange

Do not Hi-Pot test

Dimensions

Please read and follow all safety instructions carefully. Failure to do so will void the warranty.

WARNING – Product Warranty is void if the product is not installed as per installation instructions and in compliance with all local and provincial codes.

• Ensure installation complies with local electrical rules and regulations.
• All electrical work must be performed by a licensed electrician.
• Protective earth; protective group (symbol 7).
• For LED Options 2,700K, 3,000K, Red, Green, Blue, RGBA, RGBW, Tunable White: This product contains a light source of energy efficiency class G.
• For LED Options 3,500K, 4,000K, and 5,000K: This product contains a light source of energy efficiency class F.
• All luminaires may become hot. Use discretion on where the luminaire is mounted. Take care when setting the luminaire as it may become hot.
• Luminaire should only be used complete with a protective shield. If the protective shield is cracked, immediately stop using the luminaire. Isolate the light source, keep it dry and immediately contact Lumascape for the replacement of the protective shield (symbol 11).
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by Lumascape or their service agent to avoid a hazard.
• The light source contained in this luminaire shall only be replaced by Lumascape or their service agent to avoid a hazard.
• Do not stare at the operating light source. The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 23′ (7 m) is not expected (symbol 13).
• Basic insulation has been maintained between the line voltage and the control conductors.
• Ensure mains input power to the power supply is surge-protected.
• Never make or break connections while the circuit is energized.
• Do not make modifications or alter the product.
• Keep luminaire clean and free of debris.
• Only clean with warm water.
• Do not use chemicals or abrasives to clean the luminaire as this may void the product warranty.
• Connections are to be kept clean and dry at all times.
• Suitable for use indoors or outdoors.
• The luminaire’s cable must be connected to an IP66/68-rated external junction box.

CAUTION Risk of Electric Shock.

ARCHITECTURAL & FACADE LIGHTING | lumascape.com.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>