LUMASCAPE LS3330 In Ground Erden Brass Instruction Manual
- June 2, 2024
- LUMASCAPE
Table of Contents
LUMASCAPE LS3330 In Ground Brass
Product information
Specifications
- Model: ERDEN BRASS EB3 IN-GROUND
- Part Number: IN0238-240307
- Installation Type: Direct Burial
- IP Rating: 4.5 (115mm) / 5.6 (141mm)
- Supply Voltage: DA
- Cover Dimensions (LxWxH): 6.0 (153 mm) / 6.0 (153 mm) / 6.2 (158 mm)
- Weight: Not specified
- Ambient Temperature: Not specified
- Static Load Rating: Not specified
Product Usage Instructions
Safety Instructions
Please read and follow all safety instructions carefully to avoid warranty
void. Ensure compliance with local electrical rules and regulations. All
electrical work must be done by a licensed electrician.
Installation Guidelines
Install the luminaire as per the installation instructions provided. Make
sure to use a protective shield with the luminaire at all times. Position the
luminaire carefully as it may become hot during operation.
Wiring designations
| Color | Red | Black | Orange |
|---|---|---|---|
| EN | PowerSync (3-core) | ||
| FR | Color Rouge | Noir | Orange |
Frequently Asked Questions (FAQ)
What should I do if the luminaire becomes hot during operation?
Use caution when handling the luminaire, and ensure it is mounted in a
suitable location where heat dissipation can occur effectively.
SPECIFICATION
- MODEL LS3330
- PART NUMBER LS3330 – 15D xxx x D xx xx x 21 x xx PS x
- INSTALLATION TYPE IN-GROUND/IN-GRADE: DIRECT BURIAL
- IP RATING IP68
- SUPPLY VOLTAGE 30 to 48 Vdc
- INSTRUCTIONS COVER PowerSync™
- DIMENSIONS (LxWxH) Refer to included drawings
- WEIGHT 6.2 lb (2.8 kg)
- AMBIENT TEMPERATURE -4ºF to 122ºF (-20ºC to 50ºC)
- STATIC LOAD RATING 2,866 lb (1,300 kg)
Included Components
- Instructions
- Luminaire
SAFETY INSTRUCTION
-
No Downward Force
-
Do Not Overtighten
-
Do Not Use Power Tools on Screws
-
Keep Electronics Free From Dirt and Moisture
-
Keep Away from Flammable Materials
-
Do Not Hose or Pressure Clean
-
Do Not Use Silicone On Outside Surface
- Do Not Cut Cable to the Luminaire
- Do not allow soil, fill or any material to build up around the luminaire. Warranty will be void.
INSTALLATION INSTRUCTION
Wiring Designations
DIMENSION
Please read and follow all safety instructions carefully. Failure to do so
will void warranty
WARNING – Product Warranty is void if product is not installed as per
installation instructions and in compliance with all local and provincial
codes.
- Ensure installation complies with local electrical rules and regulations.
- All electrical work must be performed by a licensed electrician.
- Protective earth; protective group (symbol 7).
- For LED Options 2,700K, 3,000K, Red, Green, Blue, RGBA, RGBW, Tunable White: This product contains a light source of energy efficiency class G.
- For LED Options 3,500K, 4,000K, 5,000K: This product contains a light source of energy efficiency class F.
- All luminaires may become hot. Use discretion on where the luminaire is mounted. Take care when setting luminaire as it may become hot.
- Luminaire should only be used complete with protective shield. If protective shield is cracked, immediately stop using luminaire. Isolate light source, keep it dry and immediately contact Lumascape for replacement of protective shield (symbol 11).
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by Lumascape or their service agent in order to avoid a hazard.
- The light source contained in this luminaire shall only be replaced by Lumascape or their service agent in order to avoid a hazard.
- Do not stare at the operating light source. The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 23′ (7 m) is not expected (symbol 13).
- Basic insulation has been maintained between line voltage and the control conductors.
- Ensure mains input power to power supply is surge protected.
- Never make or break connections while the circuit is energized.
- Do not make modifications or alter the product.
- Keep luminaire clean and free of debris.
- Only clean with warm water.
- Do not use chemicals or abrasives to clean luminaire as this may void the product warranty.
- Connections are to be kept clean and dry at all times.
- Suitable for use indoors or outdoors.
- The luminaire’s cable must be connected to an IP66/68 rated external junction box.