evatmaster 30W Outdoor LED Flood Light Installation Guide
- June 15, 2024
- evatmaster
Table of Contents
evatmaster 30W Outdoor LED Flood Light
Please read this manual carefully before using the product
Application
- Widely used in shopping mall exhibition
- sculptures
- gymnasiums
- car-packing places
- stadiums
- landscaping works
- billboards
- certre
- parks
- building
- stairway
- Facades and public corridors and other indoor and outdoor lighting
Notes before Installation
- Be careful to open the carton, and contact us if any damage.
- This product must be installed in accordance with the applicable installation, code by a person familiar with the construction and operation of the product and the hazards involved.
- “caution – the risk of shock” and “disconnect power before servicing” when a photoelectric switch is provided.
- Please check whether the voltage marked on the luminaire is consistent with the input voltage to be connected, so as not to damage the LED luminaire.
- To ensure the lifetime of the product, please do not use it in a place with strong acid mist.
- Make sure the installation position can withstand 10 times the weight of the luminaire before installation and install it at a flat place without vibration, no swing, and no fire hazard.
Package
- LED FLOOD Light
- Installation Instruction.
Overview Description
Installation instructions
Turnnion Mount
- Drilling, and installing expansion screw until the middle side.
- Tighten the Nuts.
- Connect the electrical wiring according to the instructions, Caution: turn off the electricity before installtion.
- Use this screw to adjust the bracket angle, Rotate 180 degrees.
wiring diagram
- Please read this manual carefully before using the product
Shipping and Warehousing
- Please do not shake it too much during transportation, handle it carefully when unloading.
- Recommended to be stored in a warehouse of -10~ +60 ℃ and keep the warehouse dry.
Troubleshooting
PROBLEM | POSSIBLE CAUSE | SOLUTION |
---|
Light will not come on
| The light switch is turned off. B.Fuse is blown or the circuit breaker is turned off.
C.Incorrect circuit wiring.
| A. Turn the light switch on.
B. Replace the fuse or turn the circuit breaker on.
C. Verify that the xture is wired properly.
Importer
- Company Name: changshalanxikejiyouxiangongsi
- Address: liuyanghejiedaofuyuanxilu220hao
- yingxiangyuanerqi1、2dong1340hao
- changshashi kaifuqu hunansheng
- 410000 CN
- Contact Person: Dongxia Chen
- Email: Betina0711@hotmail.com
Manufacturer
- Company Name: Shenzhen XSY Lighting Co., Ltd,
- Address: NO.2 Building, Hengchangrong High Tech Ind Park, Shangnan East Rd, Hongtian, Shajing Town,
- Bao’an,Shenzhen China
Contact
- EVATOST CONSULTING LTD
- Suite 11, First Floor, Moy Road Business UK
- REP Centre, Taffs Well, Cardiff, Wales, CF15 7QR
- contact@evatmaster.com
- Support Email: Betina0711@hotmail.com.
Read User Manual Online (PDF format)
Loading......