SUPERATV UF1000 UForce 600 Bed Rack Delta Instruction Manual

: June 1, 2024
: SUPERATV

Table of Contents

SUPERATV UF1000 UForce 600 Bed Rack Delta
Product Information
Product Usage Instructions
Frequently Asked Questions
Liability Statement
INSTALLATION INSTRUCTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SUPERATV UF1000 UForce 600 Bed Rack Delta

SUPERATV-UF1000-UForce-600-Bed-Rack-Delta-product

Product Information

Specifications

Product Name: Bed Rack CFMOTO UF1000
Manufacturer: SuperATV
Model Number: IN-BR-CF-UF1000
Installation Time: Approximately 1-2 hours

Product Usage Instructions

Step 1: Pre-Installation Preparation

Do not discard packaging until the product has been successfully installed. Ensure you have all the necessary components including Basket, Brackets, Tie Downs, Washers, Knob Lock Washers, Nuts, and Anchors.

Step 2: Installing Anchors

Install Anchors into the Bed of your vehicle and tighten them securely. Repeat the process for the driver’s side of the bed.

Step 3: Installing Brackets

Install the Brackets to the Bed following the components shown in the illustrations. Make sure the hardware is snug but not overly tight. Repeat the process for the passenger side of the bed.

Step 4: Placing Basket

Place the Basket onto the Brackets. Ensure that the Brackets are braced during this step to prevent any movement.

Step 5: Securing the Basket

Secure the Basket to the Brackets using the provided hardware (8 each of M10 x 25mm bolts and M10 Nuts). Align the assembly with the Bed and tighten all hardware securely.

Frequently Asked Questions

Q: What should I do if I encounter issues during installation?

A: If you encounter any difficulties during installation, please contact our customer support team at sales@superatv.com or call us at 1-855-743-3427 for assistance.

Q: Can I use this Bed Rack with other vehicle models?

A: The Bed Rack CFMOTO UF1000 is specifically designed for CFMOTO UF1000 models. It is recommended to check compatibility before attempting to install it on other vehicles.

Q: How do I maintain and clean the Bed Rack?

A: To maintain the Bed Rack, regularly inspect the hardware for any signs of loosening and retighten if necessary. Clean the rack with a mild detergent and water solution to remove dirt and debris.

Bed Rack: CFMOTO UF1000

Do not discard packaging until product has been successfully installed.

SUPERATV-UF1000-UForce-600-Bed-Rack-Delta-fig-1

Liability Statement

SuperATV’s® products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV® and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact SuperATV® to verify that they will work together.
Although SuperATV® has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. SuperATV® urges operators and occupants to wear a helmet and appropriate riding gear at all times.
By purchasing and installing SuperATV® products, user agrees that should damages occur, SuperATV® will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV®. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim.
SuperATV® will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by SuperATV®. SuperATV® parts and products are not warrantied if item was not installed properly, misused, or modified.
Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.
The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to hold SuperATV® harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV® harmless from any violation thereof.

Read instructions and view illustrations before beginning.
Thank You For Choosing