Wireless-Tek WI-POE11S-48V PoE Splitter Installation Guide
- June 16, 2024
- Wireless-tek
Table of Contents
Wireless-Tek WI-POE11S-48V PoE Splitter
Product Information
Specifications
- Model: WI-POE55S-BT-I-DC
- Input: 10/100Mbps PoE+
- Output: DC 12V, 16V, 24V, 48V
- Data Output: 802.3BT 90W
Appearance Overview
The product has the following components:
- 1 x Splitter
- 1 x Quick Installation Guide
- 1 x Wrench (only for WI-POE56S-BT-I-O)
- 1 x Ground Wire (only for WI-POE56S-BT-I-O)
- 2 x Screw Driver (only for WI-POE55S-BT-I-DC)
- 1 x Wall-mounting Accessory (only for WI-POE55S-BT-I-DC)
- 3 x M22 Waterproof Gland (only for WI-POE56S-BT-I-O)
LED Indicators
The product has the following LED indicators:
-
PoE (Orange):
On – Power received successfully, Blinking – Abnormal power reception or abnormal DC output, Off – Not Working -
Data (Green):
On – Data connection is successful, Blinking – Data transmission, Off – No device connected
Product Usage Instructions
Step 1: Disassemble the waterproof gland
For WI-POE56S-BT-I-O:
- Remove the clamping nut.
- Take out the sealing insert.
Step 2: Connect the cable
Plug the cable into the appropriate port.
Step 3: Insert the sealing insert
Insert the sealing insert into the waterproof gland body.
FAQ
Q: What is the input of the product?
A: The input is 10/100Mbps PoE+.
Q: What are the output options?
A: The product has DC output options of 12V, 16V, 24V, and
48V.
Q: What is the maximum power supported for data output?
A: The maximum power supported for data output is 802.3BT
90W.
Package Content
Take WI-POE55S-BT-I-DC as an example
Appearance Overview
WI-POE11S-48V
LED indicator
LED Indicators
|
Description
---|---
PoE
| On: PoE power received successfully
Off: No PoE power supply access
Blinking: Abnormal PoE power reception or abnormal DC output
Data
| On: Data connection is successful
Blinking: Data transmission
Off : No Device connected
WI-POE56S-BT-I-O
LED indicator
| LED Indicators | Description |
|---|
PoE
| Blinking: Abnormal power reception On: The voltage of PoE output is normal
Off: The voltage of PoE output is abnormal
PWR
| On: 12V DC output is normal
Off: No PoE output or the splitter is abnormal
WI-POE55S-BT-I-DC
LED indicator
LED Indicators
|
Description
---|---
PoE(Orange)
| On: Power received successfully
Blinking: Abnormal power reception or abnormal DC output
Off : Not working
Data(Green)
| On: Data connection is successful
Blinking: Data transmission
Off : No Device connected
Application Diagram
WI-POE31S
- Front panel
-
LED Indicator light
LED Color Description
PoE
|
Orange
| On: Power received successfully
Blinking: Abnormal power reception or abnormal DC output
Off : Not working
Data
|
Green
| On: Data connection is successful Blinking: Data transmission
Off : No Device connected
Device Connection Diagram
Accessories Installation
For WI-POE56S-BT-I-O
Step 1: Disassemble the waterproof gland
Step 2: Turn the body of waterproof gland to the RJ45 ports and tighten it by the wrench.
Pick a cable and run through the sealing insert and clamping nut.
Step 3: Plug the cable into the port.
Step 4: Insert the sealing insert into the waterproof gland body.
Step 5: Attach the clamping nut to the waterproof gland to complete
assembly.
Step 6: Check it and make sure it is tightly installed.
Step 7: Repeat Step 1 to Step 6 for other ports.
Installation
- Wall-mount Installation（Only for WI-POE56S-BT-I-O）
- Desktop Installation
Warranty Card
| Username | |
|---|---|
| Address | |
| Telephone No. | |
| Purchase Shop | |
| Purchase Address | |
| Product Model No. | |
| Purchase Time | |
| Serial No. | |
| Dealer Signature |
- If the product defects within three months after purchase, we will provide you with a new product of the same model.
- If the product defects within the three-year warranty period, we will provide professional maintenance service.
- Proof of purchase and a complete product serial number are required to receive any services guaranteed as part of the limited warranty.
- Any other defects that are not caused by workmanship or product quality, such as natural disasters, water damage, extreme thermal or environmental conditions, sticker damaged, warranty card losing will disqualify the product from limited warranty.
Wireless-Tek Technology Limited
Address: Biaofan Technology Building 402, Bao’an street, Baoan District,Shenzhen City, Guangdong, China Website:www.wireless- tek.com
Tel:86-0755-32811290
Technical Support:tech@wireless-tek.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>