OMT V20230131 Brake Pad Spreader Instruction Manual
- June 2, 2024
- OMT
Table of Contents
OMT V20230131 Brake Pad Spreader
Product Information
- Specifications
- Material: AISI 1045 Steel, Nylon
- Dimensions: Overall Plate
- Net Weight: 9.5 oz. (270 g)
Product Usage Instructions
- Safety Information
- Danger! Always prioritize safety when working on your vehicle. Ensure the vehicle is on level ground, the parking brake is engaged, and the engine is off. Allow the vehicle to cool if it’s hot.
- Operation
- Park your vehicle on level ground, engage the parking brake, and turn off the engine.
- Jack up the vehicle and secure it with jack stands or appropriate supporting equipment.
- Locate the brake calliper on the wheel you are servicing. Use a brake calliper tool or C-clamp to compress the brake pads inside the calliper.
- Insert the brake pad spreader between the brake pads and into the calliper.
- Turn the knob of the spreader to expand the brake pads until they are properly aligned.
- Remove the spreader and compress the brake pads again to ensure proper seating.
- Repeat the process for other brake pads in the calliper.
- Service your vehicle as needed, checking brake pads for wear and replacing if necessary.
- Maintenance
- If you have any questions or need assistance, contact us at help@cs-supportpro.com.
- Regularly check and maintain your brake system for optimal performance.
FAQs
- Q: Can I use this brake pad spreader on all types of vehicles?
- A: The brake pad spreader is designed for use on most standard vehicles. However, always check compatibility with your specific vehicle model before use.
- Q: How often should I check my brake pads for wear?
- A: It is recommended to inspect your brake pads regularly, especially during routine maintenance checks or if you notice any changes in braking performance.
Safety Information
Danger!
- The instructions provided herein are only for general information. ALWAYS perform all repairs in full compliance with your vehicle’s service manual. Particularly, ALWAYS tighten parts to the torque ranges specified in the service manual. After any repair, test your brakes and vehicle in your workshop and at low speed before returning to normal use.
- DO NOT allow children or those unfamiliar with this product and its compatible brakes to use it. Do not use while tired or while intoxicated with alcohol, drugs, or medication. Keep children and bystanders away during use.
- Stay alert, watch what you are doing, and use common sense when using this product. Keep your work area clean and well-lit. Cluttered and dark areas invite accidents.
- ALWAYS wear personal protective equipment (PPE) suitable for your task. Always wear ANSI-approved eye protection. Other equipment such as hand protection and non-slip footwear will usually be needed as well. Dress properly for automotive servicing. Do not wear loose clothing or jewellery. Keep hair and clothing away from moving parts.
- ALWAYS activate your vehicle’s parking brake before any engine work. If your vehicle requires one or both front wheels to be removed to provide access to the engine, use jacks and jack stands able to fully support the necessary weight.
- ALWAYS disconnect and remove your vehicle’s battery before working on the brake system. Large metal tools can cause shorts and electric shock during accidental contact with either terminal.
- Maintain this product. Check for misalignment, binding, wear, or other damage before use. If any damage is detected, repair or replace the problematic components before further use.
Operation
- Park your vehicle on level ground, activate its parking brake, and turn off the engine. Allow your vehicle to cool if it has become hot through recent use.
- Jack up the vehicle. For best results, secure a raised vehicle with one or more jack stands or other appropriate supporting equipment
- Locate the brake calliper on the wheel you will be working on.
- The brake pads are located inside the calliper. Use a brake calliper tool or a large C-clamp (not included) to compress the brake pads inside the calliper.
- This will create space for the brake pad spreader. Use retaining hooks (not included) to secure the calliper pistons in place.
- Insert the brake pad spreader between the brake pads and into the calliper.
- Turn the knob of the brake pad spreader to expand the brake pads and create more space in the calliper. Keep turning the handle until the brake pads are properly aligned and the calliper can move freely.
- Remove the brake pad spreader and compress the brake pads again with the brake calliper tool or C-clamp to ensure that they are properly seated.
- Repeat the process on the other brake pads in the calliper.
- Service your vehicle as needed. Check the brake pads for wear and replace them if necessary
Parts List
- 1 × Brake Pad Spreader
- 2 × Gloves
Maintenance
- For best results, clean with a mild detergent and a soft cloth after each use.
- Do not use caustic chemicals or harsh abrasives.
- Rinse entirely clean and allow time to dry completely before further use.
- Check the tool periodically for any signs of wear or damage.
- Repair or replace any problematic components before any further use
- If this tool will not be used for an extended time, store it in a cool dry place inaccessible to children and away from direct sunlight.
Specifications
| Material | AISI 1045 Steel, Nylon |
|---|---|
| Dimensions | Overall |
| Plate | 4×2×0.2 |
| Net Weight | 9.5 |
Contact Us
- Thank you for choosing our products!
- If you have any questions or comments, contact us at help@cs-supportpro.com and we’ll resolve your issue ASAP!
- For a .pdf copy of the latest version of these instructions, use the appropriate app on your smartphone to scan the QR code to the right.
- CWB-0002-BK Rev. 31 Jan. 2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>