OMT NWS-C015-RD Crowfoot Wrench Set Instructions
- May 15, 2024
- OMT
Table of Contents
OMT NWS-C015-RD Crowfoot Wrench Set
Specifications:
- Material: 45# Steel
- 3/8 in. Drive Fitment: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm
- 1/2 in. Drive Fitment: 21, 22, 24 mm
- Net Weight: 3.2 lb. (1.4 kg)
Product Usage Instructions
- Fitment: Select the crowfoot wrench size that matches your fastener and attach it to your torque wrench or ratchet.
- Operation: Apply steady and even pressure to the ratchet handle while turning it. Avoid sudden or jerky movements to prevent damage to the fastener or the wrench.
- Tightening Fasteners: Always tighten fasteners to the torque specifications provided in your vehicle’s service manual.
FAQ:
-
Q: How do I choose the right crowfoot wrench size?
A: Select the size that matches your fastener. Refer to the fastener size indicated on your vehicle or equipment. -
Q: Can I use these crowfoot wrenches with an impact wrench?
A: It is not recommended to use crowfoot wrenches with impact tools as they are designed for hand tools like torque wrenches or ratchets. -
Q: How should I store these crowfoot wrenches?
A: Store them in a dry place away from moisture and corrosive materials. Consider using a tool chest or organizer for easy access and protection.
Safety Information
Warning!
- Keep your work area clean and well-lit. Cluttered or dark areas invite accidents.
- Keep children and bystanders away while using this product.
- DO NOT use this product while you are tired or under the influence of drugs, alcohol, or medication.
- Use the appropriate safety equipment for your job.
- Before servicing a vehicle, turn off its engine and refer to its manufacturer’s service and repair manual for instructions on how to safely secure the vehicle in place with chocks, jacks, stands, etc.
- DO NOT wear loose clothing or jewellery while using this product. Keep your hair, clothing, and any gloves away from any moving parts.
- Use this product ONLY for its intended purpose, loosening and tightening fasteners of the sizes marked.
- DO NOT allow people unfamiliar with this product or these instructions to use it.
- DO NOT overreach. Keep proper footing and balance at all times.
- Maintain this product. Check for wear or any other condition that may affect this product’s operation. If this product becomes damaged, have it repaired before further use.
- Store out of the reach of children.
- ALWAYS tighten fasteners to their torques stated in your vehicle’s service manual.
- DO NOT use excessive pressure with this product and do not force it or its attachments. For very stubborn components, apply penetrating oil.
Specifications
Material
|
45# Steel
---|---
Fitment
|
3/8 in. Drive
|
8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm
1/2 in. Drive
|
21, 22, 24 mm
Net Weight
|
3.2 lb. (1.4 kg)
Operation
- Simply fit the piece matching your fastener onto your torque wrench or ratchet to use.
- Apply steady, even pressure to the rachet handle while turning it. Avoid sudden or jerky movements to prevent rounding off the fastener or damaging the wrench.
- When installing a fastener, ALWAYS tighten fasteners to their torques stated in your vehicle’s service manual.
Contact Us
Thank you for choosing our products! If you have any questions or comments,
contact us at support@orionmotortech.com
and we’ll resolve your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the
appropriate app on your smartphone to scan the QR code to the right.