PATRIOT 832-0220 Pivot Track Closer Owner’s Manual

PATRIOT 832-0220 Pivot Track Closer

Thank you for choosing the Patriot Pivot Track Closer!
This manual covers the operation and maintenance of the Patriot Pivot Track Closer. All information in this manual is based on the latest production information available at the time of printing. For orientation, left and right are determined by sitting in the operator seat facing forward.
Purpose
The Patriot Pivot Track Closer is designed to provide the user with a filled- level packed pivot track. The concept of this machine is to allow the user the flexibility of being able to adjust the machine on the fly. No other track closer gives the user such convenience. Also, the disc blades are adjustable independently up, down, in and out, giving the user more options in different situations. The Four Bar model allows the user to bring more soil into the pivot track area if needed.

Features

1. 22” Disc Blades – Set at the optimum angle to get the perfect amount of throw.
2. V Shaped – This v shape allows the soil to funnel in with little effort from the driver.
3. Heavy Built – Your new Patriot Pivot Track Closer is built with a 7″ x 5″ x 3/8″ main frame with 1″ x 8″ end plates, the disc blade is held in place with a 1,750 lbs. spindle and hub mounted on a 2” x 2” solid steel shank. The machine weighs 2,200 lbs.; three bars, 2,700 lbs.; four bars, upon delivery and the packer wheel can be filled to add 950 lbs.
4. Hydraulically adjustable – Patriot Pivot Track Closers are the only closer that allows the user the flexibility to adjust the depth on the fly. Two 3″x 8″cylinders are used to control the depth of the machine on the fly. Allowing you, the user, complete control.
5. Packer Wheel – The Patriots packer wheel is made from ¼” steel plate and is capable of being filled with 950 lbs. of sand.

Add-on Features: (can be added to your standard pivot track closer)

• Guide cone assembly – assist in keeping the pivot track closer centred over the pivot track.
• Power Harrow – (hydraulically driven) evenly spreads the soil out after the packing drum to allow for smoother field conditions for future field operations.
• The Power Harrow is available in different widths:
• 48″ – For use with standard three-bar pivot track closer. 60″ – For use with extended three-bar pivot track closer and standard four-bar pivot track closer.
• 88″ – For use with extended four-bar pivot track closer.
• Minden Machine Shop Inc. reserves the right to make changes at any time without notice and without incurring any obligation.
• Please become familiar with all safety, operating, maintenance, and troubleshooting information. This will ensure your safety and long life for your pivot track closer.

SAFETY AND OPERATION RULES

GENERAL SAFETY STATEMENTS
Safety precautions are essential when the use of any mechanical equipment is involved. These precautions are necessary when using, storing, and servicing mechanical equipment. Using this equipment with the respect and caution demanded will considerably lessen the possibility of personal injury. If safety precautions are overlooked or ignored, personal injury or property damage may occur. This unit was designed for specific applications. It should not be modified or/used for any application other than which it was designed. If there are any questions regarding its application, contact Patriot Equipment. Do not use this unit until you have been advised. For more information, call 1-800-264-6587. Read this entire manual carefully – know your equipment. Consider the application, limitations, and potential hazards specific to your unit. Occupational safety is of prime concern to us. This manual was written with the safety of the operator and others who come in contact with the equipment as our prime concern. The manual presents some of the day-to-day work problems encountered by the operator and other personnel. We wrote this manual to help you understand safe operating procedures for Patriot Pivot Track Closers. We want you as our partner in safety. A copy of this manual should be available to all persons who may operate this machine. It is your responsibility as an owner, or operator, or supervisor, to know what specific requirements, precautions, and work hazards exist and to make these known to all other personnel working with the equipment or in the area, so that they too may take any necessary safety precautions that may be required. Avoid any alterations of the equipment. Such alterations may create a dangerous situation where serious injury or death may occur.

Why is SAFETY important to you?
3 BIG REASONS

Signal Words
Note the use of the signal words DANGER, WARNING, and CAUTION with safety messages. The appropriate signal word for each message has been selected using the following guidelines:
DANGER – An immediate and specific hazard, which will result in severe personal injury or death if proper precautions are not taken.
WARNING – A specific hazard or unsafe practice, which could result in severe personal injury or death if proper precautions are not taken.
CAUTION – Unsafe practices could result in personal injury if proper precautions are not taken, or a reminder of good safety practices.

SAFETY ALERT SYMBOL

BE ALERT! YOUR SAFETY IS INVOLVED

• The Symbol Shown Above Is Used To Call Your Attention To Instructions Concerning Your Safety.
• Watch This Symbol – It Points Out Important Safety Precautions. It Means ATTENTION! Become Alert! Your Safety Is Involved! Read The Message That Follows And Be Alert To The Possibility Of Personal Injury Or Death.
• Anyone who will operate or work around a Patriot Pivot Track Closer shall first read this manual! This manual must be delivered with the equipment to its owner. Failure to read this manual and its safety instructions is a misuse of equipment.

SAFETY EQUIPMENT
Please, remember safety equipment provides important protection for persons around an auger that is in operation. Be sure ALL safety shields and protective devices are installed and properly maintained. If you find any shields or guards damaged or missing, contact Minden Machine Shop Inc. for the correct items.
SERIAL NUMBER
To ensure efficient and prompt service, please furnish us with the model and serial number of your Patriot Pivot Track Closer in all correspondence or other contact. The serial number is located on the left side on the front of the track closer.

SAFETY PROCEDURES

1. Use only lifting equipment with the proper capacity when loading or unloading your Patriot Pivot Track Closer
2. Make sure you are using a tractor with enough horsepower to pull your Track Closer
3. Do not set your track closer too far into the ground. Under no circumstances should you set the blades past the usable depth of 8”.
4. Be careful when backing to not run into anything.
5. Be aware of anything buried underground so as not to damage it or the track closer.
6. If you fill the drum be aware the water freezes and you will damage the drum if not filled with antifreeze or drained when not in use.
7. Before each use check to make sure all bolts are tight the hitch pins are not worn and the hydraulic hoses are tight and not worn.
8. In case of any defect or awareness of potential danger please contact Minden Machine Shop, Inc at 1-800-264-6587 immediately.

OPERATOR QUALIFICATIONS

Operation of this Pivot Track Closer shall be limited to competent and experienced persons. In addition, anyone who will operate or work around a Track Closer must use good common sense. To be qualified, they must also know and meet all other requirements such as:

1. Some regulations specify that no one under the age of 18 may operate power machinery. This includes the tractor your pivot track closer is attached to. It is your responsibility to know what these regulations are in your area or situation.
2. Current OSHA regulations state in part: “At the time of initial assignment and at least annually thereafter, the employer shall instruct every employee or user in the safe operation and servicing of all equipment with which the employee or user is, or will be involved.”
3. Unqualified persons are to stay out of the work area as shown in the work diagrams.
4. A person who has not read and understood all operating and safety instructions is not qualified to operate the machine.

SAFETY OVERVIEW

• YOU are responsible for the SAFE operation and maintenance of your Patriot Pivot Track Closer.
• YOU must ensure that you and anyone who is going to operate, maintain, or work around the Track Closer are familiar with the operating, maintenance, and safety information contained in the manual. This manual will take you step by step through your working day and alert you to all good safety practices while operating the pivot track closer.
• Remember YOU are the key to safety. GOOD PRACTICES protect not only you but also the people around you.
• Make these practices a working part of your safety program. Be certain EVERYONE operating this machine is familiar with the procedures recommended and follows safety precautions. Remember, most accidents can be prevented. Do not risk injury or death by ignoring any information addressed.
• Pivot Track Closer owners must give operating instructions to operators before allowing them to operate this machine. They must be reviewed at least annually thereafter per OSHA regulation 1928.57.
• The most important safety device on the equipment is a SAFE OPERATOR. It is the operator’s responsibility to read and understand ALL instructions in the manual and to follow them. All accidents can be avoided!
• Any person who has not read and understood all operation and safety instructions is not qualified to operate the track closer. An untrained operator exposes himself and bystanders to possible serious injury or death.
• Do not modify the equipment in any way. Unauthorized modifications may impair the functions and/or safety and could affect the life of the equipment.

SAFETY AFFIRMATION

• I have read and understand the operator’s manual and all safety signs before the operation, maintenance, adjusting, and using the track closer.
• I will allow only trained persons to operate the Patriot Pivot Track Closer. *An untrained operator is not qualified to operate this equipment.
• I have access to a fire extinguisher.
• I have all guards in place and will not operate the Patriot Pivot Track Closer without them.
• I will not allow riders on the Patriot Pivot Track Closer.
• I understand the danger of moving parts (Disc Blades are sharp, and pinch points are present) and will stop the engine before servicing.
• I recognize the danger of the track closer coming in contact with power lines, buried or above ground.
• I will not try to unplug this machine by allowing any part of my body to be under any part of this machine.
• I am aware of the need to secure the Patriot Pivot Track Closer to the tractor properly before each use.
• I understand the danger of working with hydraulics and will make sure all hydraulic components are in good working order before each use.
• I understand that any accidents that occur with the Patriot Pivot Track Closer are my responsibility.
• I understand that Minden Machine Shop will not be held responsible for any accidents that involve the Patriot Pivot Track Closer.
• SIGN OFF SHEET (this must be signed annually as part of your safety program)
• As a requirement of OSHA, the employer must train the employee in the safe operation and safety procedures with this Pivot Track Closer. We include this sign-off sheet for your convenience and personal record-keeping.

MACHINE INSPECTION

After delivery of your new Pivot Track Closer and/or completion of assembly, before each use, inspection of the machine is mandatory. This inspection should include, but not be limited to:

1. Check to see that all guards are in place, secured, and functional.
2. Check all safety signs and replace any that are worn, missing, or illegible.
3. Are all fasteners tight?
4. All Hydraulic components are tight and in working order.

SAFETY DECALS

• Keep safety decals clear and legible at all times.
• Replace decals and signs that are missing or have become unreadable.
• Safety signs are available from your Dealer or the manufacturer.

TRANSPORTING THE PIVOT TRACK CLOSER

• DANGER: Do not transport the Patriot Pivot Track Closer at speeds above 30 MPH and comply with your state and local regulations governing marking towing, and maximum width. Observe safe driving and operation practices.
• ALWAYS make sure the Track Closer is properly secured to a trailer before moving or properly attached to the tractor.
• DANGER: Be alert to overhead obstructions and electrical wires. Failure to do so may result in electrocution.
• Maintain at least ten (10) feet of clearance. Make certain everyone is clear of the work area before moving.

Pivot Track Closer Decal Locations

DESIGNATED WORK AREA

WORK AREA DIAGRAM
Before using the Track Closer, a designated work area should be established. The work area should be a perimeter in which no persons should be allowed that are not directly involved in the operation of the Track Closer. Also, all persons in the work area must have read and understand this manual.
RULES FOR SAFE WORK AREA
Under no circumstances should persons not involved in the operation be allowed to trespass into the work area. It shall be the duty of all operators to see that children and/or other persons stay out of the work area! Trespass into the work area by anyone not involved in the actual operation, or trespass into the hazard area by anyone, shall result in immediate shutdown by the operator.
It shall be the responsibility of all operators to see that the work area has secure footing, is clean and free of all debris, and tools, that might cause tripping and/or falling. It shall also be their responsibility to keep the work area clean and orderly during the operation.

OPERATING PROCEDURES

OPERATING GUIDELINES
The Patriot Pivot Track Closer is designed to safely and efficiently provide you the user with a filled level-packed pivot track. Following all safety and operating guidelines should ensure many years of safe and affordable use.
PRE-OPERATION CHECKLIST
When operating this unit for the first time and each time you use it, the following information should be reviewed.

1. Make sure the unit is secured to your tractor properly.
2. Make sure the hydraulic lines are not worn and are properly attached.
3. Make sure the shields are properly installed.
4. Make sure you understand the operation of this machine

OPERATION

1. Start the tractor engine, raise the pivot track closer and move the tractor so the pivot track is directly underneath the tractor.
2. Lower the machine to the desired depth and start driving, making sure that you are following the arc of the pivot track.
3. Adjust the machine by raising and lowering the packing wheel until you are creating a filled-level track.

OPERATION HINTS

1. Some newer tractors have a “float” option for the three points, if so, put the three points in “float” during operation. This will allow easier adjustment of the pivot track closer to the drum.
2. Adjust the draft control for fine-tuning the operation of the pivot track closer.
3. Some operators like to remove the sway blocks from the tractor. This will allow for more movement in the three-point arms side to side which can affect how the pivot track closer will follow the pivot track. This will give the operator more of an operational width for driving over the pivot track.
4. Adjust the top arm of the three-point so the pivot track closer will run level when lowered by the three-point.

Operation for Add-on Features:
Guide cone
The guide cone assembly can be manually raised and lowered. Once you find the correct running height, adjust the guide cone assembly so that it contacts both sides of the pivot track and has some down pressure on it. The guide cone assembly uses a torsion axle which will allow it to deflect and return as it travels through the field.
Power Harrow
The power harrow is hydraulically driven and hydraulically raised and lowered. The hydraulic motor hoses are attached to the priority outlet of the tractor. The hydraulic hoses are inserted into the hydraulic outlets of the tractor so that when the system is shut down, the operator can place the system into the “float” position (on the hydraulic control lever) to allow the hydraulic motor to slow down gradually. Also, the drum of the power harrow turns in the reverse direction of travel, so the hydraulic hoses need to be inserted accordingly. Adjust the speed of the power harrow drum with the flow control of the tractor. The hydraulics for the lift system is inserted into another set of hydraulic outlets.

WARNING! Failure to properly lock out the pivot track could result in severe injury or death. Never work on the machine while power is being supplied to it.

LOCKOUT
If for any reason you must work on the Pivot Track Closer, turn off the tractor, place it in a park, apply the safety brake and make sure the implement is properly blocked up or do not attempt to get under the machine. Make sure all hydraulic systems are off and depressurized.

LUBRICATION & MAINTENANCE
For economical and efficient operation of your Pivot Track Closer, maintain regular and correct lubrication. Neglect leads to reduced efficiency, excessive wear, and needless downtime.

WARNING Keep all safety shields and devices in place. Never clean, adjust or lubricate a machine that is in operation

• Disc Hubs – These hubs are greased from the factory and should periodically be checked and repacked as needed.
• Packer Wheel Bearings – Greased with one pump every 12 hours of use.
• Hydraulics – Inspect before each use. Make any necessary repairs (leaks, damaged hoses, or worn tips) before use.
• Cosmetic – any exposed metal where paint or powder has been chipped, gouged, scratched, or worn should be lightly sanded, then primed and painted with good enamel paint. If the colour is hard to match, contact Minden Machine Shop Inc.
• Bearings – Inspected annually for wear and tear. Replace as needed.
• Scraper – Inspect before each use and adjust as needed.

Maintenance Safety
Correct maintenance is your responsibility. Neglecting maintenance or poor maintenance practices can result in injury or death. Always use the correct tools when performing maintenance on the machine. When performing maintenance, to avoid crushing, make sure all personnel are clear of the machine, the machine is lowered to the ground, and the tow vehicle is in the park with the engine off and the key removed. Store the machine on a clean, dry and level surface. An uneven surface could cause the machine to shift or fall, resulting in injury or death as well as damage. Any machine components that must be raised are to be securely supported. The machine is to be stored away from human activity.
To avoid entanglements , never lubricate or service the machine while it is in motion. Keep away from power-driven parts while in motion and disengage power sources before maintaining the machine. Injury or death can result from coming in contact with power-driven parts when in motion.
To avoid crushing, never stand between the tow vehicle and the machine when connecting or disconnecting the machine. Injury or death can result from being trapped between the tow vehicle and the machine.
To avoid fluid penetration, relieve hydraulic system pressure before connecting or disconnecting the tow vehicle. Escaping pressurized hydraulic fluid can penetrate the skin resulting in injury or death. NEVER USE BODY PARTS to check for suspected hydraulic leaks, use cardboard or wood to check for leaks. Always wear protective gloves and safety eyewear (glasses or goggles) when working with the hydraulic system. If an accident occurs, see a doctor immediately for correct treatment.

Other safe maintenance practices

• Never operate a combustion engine in an enclosed area. Exhaust fumes can cause asphyxiation.
• Always be sure there is adequate ventilation.
• Be careful when working around unshielded sharp edges to avoid injury by coming in contact with sharp edges.
• Keep all parts in good condition and correctly installed, and replace damaged or broken parts immediately.
• Remove tools and unused parts before using the machine.
• Be prepared for fires by having a readily accessible fire extinguisher at all times.
• Keep a readily stocked first aid kit available at all times as well as having emergency numbers posted.
• Wear protective clothing and equipment.

TROUBLESHOOTING

Packer Wheel Not Raising

Hydraulic Cylinders Malfunctioning| Check hoses for leaks – repair

Hoses connected – check connections Inspect tips – if worn, replace

Move the control lever opposite direction

Cylinder pins| Make sure pins are attached and retained
Pivot Point| Make sure nothing is obstructing the

movement of the packer wheel frame

Power Harrow Drum Not Turning/Opposite Direction
Hydraulic Motor

Chain/Sprockets Opposite Direction

| Check hydraulic hoses, are connected to the tractor Check for leaks, and repair

Check the tractor for the correct hydraulic setting in the programming Air pocket in the system

Chain attached/broken, repair or replace

Sprockets stripped/key missing, replace sprockets/keys

Move the Control lever opposite direction (recommended to shut down the hydraulic motor by going into “float”)

Reverse Hoses

Power Harrow Not Lifting
Hydraulic Cylinders Malfunctioning| Check hoses for leaks – repair

Hoses connected – check connections Inspect tips – if worn, replace

Move the control lever opposite direction

Excessive Noise
Unusual and constant noise| Inspect for damaged or loose disc blades, inspect bearings, and tighten or replace them as needed.

• The star-shaped hub uses a lug stud with a 0.625″ spline. The star-shaped hub was used on older models of the Patriot Pivot Track Closer. In the event a replacement lug stud is needed, be sure to specify it is for the star-shaped hub.

• The round hub is the current hub used on the Patriot Pivot Track Closer. The spline is 0.540″ on the lug stud. If a replacement lug stud is needed, be sure to specify that the round hub is the one used on the machine.

Three Bar Pivot Track Closer Dimensions

4 Bar Pivot Track Closer Dimensions

Three Bar Pivot Track Closer with Power Harrow Dimensions

4 Bar Pivot Track Closer with Power Harrow Dimensions

Parts Diagrams

Three Bar Pivot Track Closer Parts Identification

4 Bar Pivot Track Closer Parts
The parts on a 4-bar pivot track closer are the same as a 3-bar pivot track closer. Please refer to the 3 bar pivot track closer parts list for parts. The only different part is the frame of the 4-bar pivot track closer.

Three Bar Pivot Track Closer Parts List

ITEM| QTY| PART NUMBER| DESCRIPTION
1| 1| PTC-3B-A001| 3 Bar Pivot Track Closer Body
2| 2| PC1000| 1-7/16″ x 10-1/2″ Lower Three Point Pin
3| 1| PTC-CP-A005| Rear Drum Hyd Arm Assembly
4| 1| PTC-CP-A003| Drum Packing Wheel
5| 2| HCY1004| 2-1/2″ x 8″ Tie Rod Cylinder
6| 1| PTC-CP-A006| Scraper Blade Assembly
6.1| 1| PTC-CP-P021| Rear Panel Scraper Blade
6.2| 1| PTC-CP-P019| Right Side Panel Scraper Blade
6.3| 1| PTC-CP-P020| Left Side Panel Scraper Blade
7| 1| PC1001| 1 1/4″ x 4 5/8″ Upper Three Point Pin
8| 1| PC1003| 3/8″ x 2″ Lynch Pin
8.5| 2| B3/8×2| Hex Bolt
8.6| 2| N3/8NYL| Nylock Nut
9| 2| PC1002| 1 1/4″ x 4″ Pivot Pin For Packer Drum
10| 5| W1/2F| Plain Washer
11| 4| N1/2N| Hex Nut “1/2” UNC
12| 4| W1/2L| Lock Washer
13| 4| B1/2X2| Hex Bolt
14| 8| N5/8N| Hex Nut
15| 4| B5/8X2.5| Hex Bolt
16| 8| W5/8L| Lock Washer
17| 4| B5/8X2| Hex Bolt
18| 2| BR1095| Flange brg Sealmaster Série SF Ø1 3/4”
19| 1| TR1590| Manual Holder
20| 1| PTC-CP-P063| Sand Cover
21| 4| B3/8X1| Hex Bolt
22| 6| SPD545| Complete Disc Hub Assembly
23| 6| PTC-CP-P023| Dust Cap Retainer
24| 12| UB1000| U-Bolt 3/4x7x9
25| 24| W3/4L| Lock Washer
26| 24| N3/4N| Nut
27| Varies| PTC-CP-A001R| Right Hand Shank Weldment
28| Varies| PTC-CP-A002L| Left Hand Shank Weldment
29| Varies| PTC2001| Notched Disc
30| Varies| PTC2300| Smooth Disc

Pivot Track Closer Power Harrow

Pivot Track Closer Power Harrow Exploded View

Power Harrow Parts List

ITEM| QTY| PART NUMBER| DESCRIPTION
1| 2| HCY1004| 2-1/2 x 8 Hydraulic Cylinder
2| 2| PTC-C-A017| Conditioner Mounting Bracket
3| 2| PTC-C-A018| Pin Weldment
4| 2| PTC-C-A020| Conditioner Arm
6| 1| PTC-C-A015| Conditioner Torsion Cross Bar For 48 In
6.2| 1| PTC-C-A001| Conditioner Torsion Cross Bar For 60 In
6.4| 1| PTC-C-A016| Conditioner Torsion Cross Bar For 88 in
7| 1| PTC-C-A013| 48 In Conditioner Drum
7.2| 1| PTC-C-A002| 60 In Conditioner Drum
7.4| 1| PTC-C-A012| 88 In Conditioner Drum
8| 2| PTC-C-A004| Skid Assembly
9| 2| BR1065| Four Bolt Flange Bearing 1-1/2
10| 1| PTC4000-3| Hyd. Motor with 1-1/4″ Shaft
11| 1| PTC-C-P062| Hyd. Motor Adjusting Mount
13| 4| W3/4L| Lock Washer
14| 4| N3/4N| Hex Nut “3/4” UNC
15| 16| B1/2×1.5| Hex Bolt
16| 24| W1/2L| Lock Washer
17| 10| N1/2N| Hex Nut “1/2” UNC
19| 8| B3/8×1.5| Hex Bolt
20| 10| W3/8L| Lock Washer
21| 10| N3/8N| Hex Nut “3/8” UNC
24| 1| PTC-C-A026| Sideplate, Drive Short
25| 1| PTC-C-A025| Sideplate, Idler Short
26| 1| PTC-C-A027| Chain Cover Weldment Short
27| 1| 8012×1-1/2| #80 12 Tooth Sprocket 1-1/2″ Shaft
28| 1| 8012×1-1/4| #80 12 Tooth Sprocket 1-1/4″ Shaft
29| 7| W1/4L| Lock Washer
30| 7| B1/4×1.5| Hex Bolt
31| 2| W1/2F| Plain Washer
33| 2| B3/8×1.25| Hex Bolt
34| 1| PTC-C-P070| Key For Lower Sprocket
35| 1| #80 Conn Link| Connector Link for #80 Chain
36| 1| #80| #80 Chain – 60″ Length
35| 16| Lock Nut 1/2” UNC| Lock Nut
36| 4| B3/4X6.5| Hex Bolt
37| 1| B3/4X4.0| Hex Bolt
38| 2| B1/2X2.5| Hex Bolt
39| 2| W1/2F| Plain Washer
40| 8| B1/2X2.0| Hex Bolt

Pivot Track Closer Guide Cone Assembly

Parts List

ITEM| QTY| PART NUMBER| DESCRIPTION
1| 2| PTC-GC-A004| Bell Wheel
1.1| 8| B1/2×5.5| Bolt
1.2| 1| W1/2L| Lock Washer
1.3| 1| N1/2N| Nut
1.4| 4| BR1045| Bearing
2| 2| UB1000| 3/4″ x 7 1/16″ x 9″
3| 1| PTC-GC-A001| Guide Cone Torsion Shank
3.1| 1| PTC-GC-P005| Clamp Plate
3.2| 4| B5/8×5| Bolt
3.3| 4| W5/8L| Lock Washer
3.4| 4| N5/8N| Nut
4| 1| PTC-GC-A002| Wide Clamp Plate for Bell Wheel Shank
5| 1| PTC-GC-A003| Bell Wheel Solid Shaft Weldment
5.1| 1| SP4008| Torsion Spring for Guide Cone
6| 4| N3/4N| Hex Nut
7| 4| W3/4L| Lock Washer

3 Bar Pivot Track Closer Extension Kit

4 Bar Pivot Track Closer Extension Kit

Pivot Track Closer Hub Parts

Hub and Spindle Parts

Part Number| Description
SPD545| Complete Hub and 9″ Spindle
SPD545-2| Dust Cap
SPD545-3| XJS QU-1.75 – 1/2″ Press in Stud x 0.540
SPD545-5| BA13 Inside set bearing and race
SPD545-6| BA4 Outside set bearing and race
SPD545-7| L44610 – Outer Race
SPD545-8| L44649 – Outer Bearing
SPD545-9| L68111 – Inner Race
SPD545-10| L68149 – Inner Bearing
SPD545-11| NAT473336/442251 – Seal
SPD545-12| 9″ Spindle Only
SPD545-13| 545 Hub Only

Pivot Track Closer Packer Drum Hydraulics

Parts List

ITEM| QTY| 3 Bar Hydraulic System| 4 Bar Hydraulic System| DESCRIPTION
| | Kit Number: PTC 5000| Kit Number: PTC 5001|
1| 2| 6804-06-06-06| 6804-06-06-06| Fitting
2| 2| R1706A-P08606-10700| R1706A-P08606-15200| Hose Assembly
3| 2| R1706A-P06606-01400| R1706A-P06606-01400| Hose Assembly
4| 2| 2286034| 2286034| Tip

Pivot Track Closer Power Harrow Lift Hydraulic System

Parts List

ITEM| QTY| 3 Bar Hydraulic System| 4 Bar Hydraulic System| DESCRIPTION
| | Kit Number: PTC 5006| Kit Number: PTC 5007|
1| 4| 6400-06-06| 6400-06-06| Hyd. Cylinder Fitting
2| 2| 2603-06-06-06| 2603-06-06-06| Hyd. Tee Fitting
3| 2| 2286034| 2286034| Hyd. Tip
4| 4| R1706A-606666-07200| R1706A-666606-07000| Cylinder Hose Assemblies
5| 2| R1706A-606P08-07300| R1706A-606P08-10000| To Tractor Hose Assemblies

Pivot Track Closer Power Harrow Hydraulic Motor Kit

Parts List

ITEM| QTY| 3 Bar Hydraulic System| 4 Bar Hydraulic System| DESCRIPTION
| | Kit #: PTC 5005-1| Kit #: PTC 5005-2|
1| 1| PTC4000-3| PTC4000-3| Hydraulic Motor Not Included In Kit
2| 1| 6801-08-10| 6801-08-10| Hydraulic Fitting
3| 1| 6801-LL-08-10| 6801-LL-08-10| Hydraulic Fitting
4| 1| 6501115| 6501115| Check Valve
5| 2| 6803-08-08-08| 6803-08-08-08| Hydraulic Fitting
6| 2| R1708A-608608-01800| R1708A-608608-01800| Hydraulic Hose Assembly
7| 2| R1708A-608P08-19200| R1708A-608P08-21400| Hydraulic Hose Assembly
8| 2| 2286034| 2286034| Hydraulic Tips

LIMITED WARRANTY

Minden Machine Shop Inc. warrants all products manufactured by it to be free of defects in material and workmanship for one (1) year from the date of purchase.
This Minden Machine Shop Inc. warranty does not cover:

1. Parts and accessories supplied by Minden Machine Shop Inc. but manufactured by others. Minden Machine Shop Inc. will facilitate the other manufacturer’s warranty for the benefit of the purchaser but will not be bound thereby (for example: augers, motors, trailers, tanks, etc.).
2. Products that have been altered by anyone other than a Minden Machine Shop Inc. employee or are used by the purchaser, for purposes other than what was intended at the time of manufacture or used more than the “built specifications”.
3. Products that are custom manufactured by Minden Machine Shop Inc. utilizing the purchaser’s design which deviates from Minden Machine Shop Inc.’s normal production line manufactured or customized features of the products.
4. Malfunctions or damages to the product from misuse, negligence, customer alteration, accidents or product abuse due to incoming material or poor material flow ability or lack of required performance or required maintenance (e.g., poor material flow ability caused by incoming wet fertilizer or hot soybean meal, etc).
5. Loss of time, inconvenience, loss of material, downtime or any other consequential damage.
6. The product is used for a function that is different than the designed intent (e.g., storing soybean meal in a grain bin, unacceptable material in the bin such as hot bean meal when the product was originally designed for other application, etc).
7. Minden Machine Shop Inc. is not responsible for any equipment that this product is attached to or mounted on.

To activate this warranty, the purchaser must make contact in writing with Minden Machine Shop Inc. within one (1) year of the date of purchase. After contact, Minden Machine Shop Inc. has the right to determine the cause and qualify the legitimacy of the claim. Minden Machine Shop Inc., upon acceptance of a warranty claim, shall have a reasonable time to plan any repair or replacement and may affect repair or replacement out of its factory or through a contract with a local repair service. If a purchaser after warranty notice is made, chooses to repair itself, Minden Machine Shop Inc. must approve any expenses before they are incurred to be responsible for customer reimbursement. Minden Machine Shop Inc. shall be liable on a warranty claim for repair or replacement of any defective products and this is the purchaser’s sole and exclusive remedy. Minden Machine Shop Inc. will not be liable for any other or further remedy including claims for personal injury, property damage or consequential damage. The law of the State of Nebraska shall govern and any such claim and any issues concerning the same shall be resolved in the Nebraska District Court for the county of Kearney.

RETURN OF MERCHANDISE
Merchandise may not be returned without written approval from the factory. All returns must have a return authorization number. Obtain this number before the return and show it on all return items. A 15% restocking charge is made on merchandise returned. Returned merchandise must be shipped pre-paid.
RECEIVING MERCHANDISE AND FILING CLAIMS
When receiving merchandise it is important to check both the number of parts and their description with the packing slip. The consignee must make all claims for freight damage or shortage within 10 days from the date of delivery. When the material leaves the factory it becomes the property of the consignee. It is the responsibility of the consignee to file a claim on any possible damage or loss. Please list your preferred routing on purchase orders.
MODIFICATIONS
It is the policy of Minden Machine Shop Inc. to improve its products whenever possible and practical to do so. We reserve the right to make changes, improvements and modifications at any time without incurring the obligation to make such changes, improvements and modifications on any equipment sold previously.

WARRANTY REGISTRATION

To register equipment, or file a claim, copy and paste the words on this page into an email or Word document, fill out the appropriate information completely, and email it to larry@mindenmachine.com with the subject as EQUIPMENT WARRANTY, or fill it out and fax it to 308-832-1340.

Dealer Information: Not Applicable, check here: [ ]

• Dealer Name:
• Address:
• City:
• State:
• Zip Code:
• Phone #:
• Email:

End User Information

• Purchaser:
• Address:
• City:
• State:
• Zip Code:
• Phone #:
• Email:
• Equipment:
• Serial #:
• Date Of Purchase: / /

CONTACT

Manufactured by

• Patriot Equipment
• 1302 K Road
• Minden NE 68959
• 308-832-0220

Minden Machine Shop Inc.

• 1302 K Road Minden, NE
• 800-264-6587 / 308-832-0220

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>