Hejiaxing AJ225A Phone Stand Wireless Speaker User Guide
- August 9, 2024
- Hejiaxing
Table of Contents
Hejiaxing AJ225A Phone Stand Wireless Speaker
Specifications:
- Bluetooth Version: V5.1
- Distortion : 10%
- Bluetooth Name: AJ225
- Speaker Power: 5W
- Transmission Distance : 10m
- Noise Ratio : 80dB
- Frequency Range: 65Hz-20kHz
- Power Input: 5V 0.8A
- Speaker Parameters: 40mm, 4Ω, 5W
- Battery Capacity: 1800mAh
- Product Size: 140x80x38mm
Product Information:
Mobile phone holder, compact and portable, easy to store. Hands-free phone
calls. Bluetooth speaker function. Built-in high-capacity rechargeable lithium
battery, more portable for outdoor use. Low battery reminder, switch off the
phone after three reminders.
Product Usage Instructions
Answer The Telephone:
- Double-press the button to reject the call when there is an incoming call.
- Short press button to answer an incoming call.
- Short press button to end a call.
- Double press button to dial the last call.
Speaker Operation:
- Long press button to turn on the speaker with a beep.
- Search for Bluetooth name “AJ225” on the phone and connect.
- Long press button to switch to the previous song, short press to lower the volume.
- Long press button for next song, short press to increase the volume. A beep indicates maximum volume.
- Short press button to pause or resume playing.
- Hold down the and button simultaneously to cancel pairing with your phone.
Charging Instruction:
Plug the Type-C cable into the USB port for charging. The red light will be on
when charging and will go out when fully charged.
Warranty Information:
Applicable for one year free repair services under normal use since the
purchase date. After one year, repairs will be charged according to component
cost. Certain situations are not covered under warranty, such as damage from
natural disasters, improper use, transportation damage, and more. Ensure
proper packaging when returning product for repair.
Product Information
- Mobile phone holder, compact and portable, easy to store
- Hands-free phone calls
- Bluetooth speaker function
- Built-in high-capacity rechargeable lithium battery, more portable for outdoor use.
- Low battery reminder, switch off the phone after three reminders
Technical Parameters
Answer The Telephone
- When the phone is connected to the wireless speaker, you can double press the button to reject the call when there is an incoming call.
- When there is an incoming call, short press a button to answer it. After the call is over, short press button to end the call.
- Double press button to dial the last call.
Speaker Operation
- Long press button to turn on the speaker and with a beep. Search bluetooth name “AJ225” on the phone. After the connection is successful, there will be a beep.
- Long press — button to switch to the previous song, short press to lower the volume.
- Long press + button to the next song, short press to increase the volume. When the volume reaches the maximum, there will be a beep.
- Short press button to pause or resume playing.
- Hold down the + and — button at the same time to cancel pairing with your phone.
Charging Instruction
Plug the Type-C cable into the USB port for charging, the red light will be on when charging, and it will go out when fully charged.
Attention:
- Please don t charge the speaker under the temperature of 0°C-40°C.
- Not recommended for charging while using.
- Please pull out the USB cable after a full charge.
- Please don’t charge the speaker in high-humidity situations.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Warranty Card
Applicable for
- Since the buying date, the user enjoys one year free repair services under normal use. After one year, will be charged according to each component part cost.
- In case the component part, will be charged according to our company’s component part cost list.
- The following situations without free repair services in the warranty period
- Damage caused by natural earthquakes, rat disasters, and abnormal use.
- Damage caused in transportation, fall, and improper storage.
- Consumable components, such as spare parts, batteries, light bulbs,etc.
- Warranty information records is not complete, no purchase date, no buying shop seal, etc.
- Featured using environment, such as humidity, sulfur area, high salty and on board, etc, easy corrosion area.
- Using not according to the instructions.
- Products sold by special agreement.
- When return to factory for repair, the user should make sure the product is packed property to avoid any damage during transportation.
- Factory is not responsible for the damages caused by the users themselves improper disassembling.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>