KODAK 738JSTS80 Projection Screen 80 Inch with Tripod Stand and Carrying Bag User Guide

: June 4, 2024
: Kodak

Table of Contents

INTRODUCTION
Download The App
PACKAGE CONTENTS
PRODUCT OVERVIEW
INSTALLATION INSTRUCTIONS
TO PACK UP THE SCREEN AFTER USE
CARE/MAINTENANCE
CUSTOMER SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KODAK 738JSTS80 Projection Screen 80 Inch with Tripod Stand and Carrying Bag User Guide
\

INTRODUCTION

Thank you for purchasing the KODAK PROJECTION SCREEN with Tripod Stand& Carrying Bag. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty.

Please read all directions carefully before using the product and retain this guide for reference. This product is intended for household use only. It is not intended for commercial use.

This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty for details.

Download The App

PLEASE MAKE SURE TO VIEW AND DOWNLOAD
THE LIMITED WARRANTY AT:

https://www.kodakphotoplus.com/pages/
http://www.kodakphotoplus.com/
https://www.kodakphotoplus.com/

KODAK PROJECTION SCREEN 60″
WITH TRIPOD STAND & CARRYING BAG

KODAK PROJECTION SCREEN 100″
WITH TRIPOD STAND & CARRYING BAG

KODAK PROJECTION SCREEN 80″
WITH TRIPOD STAND & CARRYING BAG

PACKAGE CONTENTS

Projection screen
Tripod stand
Carrying bag
User guide

PRODUCT OVERVIEW

Screen Handle
Tripod Bar
Hanging Hook
Black Border
Screen
Screen Housing
Assembly Connector
Tripod
Locking Sleeve Ring
Assembly Nut
Adjustable Tripod Handle

INSTALLATION INSTRUCTIONS

TRIPOD SETUP:

Choose a suitable place to set up.
Open the tripod feet and place tripod
Loosen the locking sleeve ring on the tripod bar to pull up the bar. Then, tighten the locking sleeve ring to lock the bar in place.
Insert the assembly connector on the back of the screen housing into the assembly nut on the adjustable tripod handle. Then, turn the assembly nut to keep the housing in place.
1. Hold the screen handle and pull the screen out until you see the black border. Then, hang the screen handle on the hanging hook on top of the tripod bar.

NOTE: To adjust the screen height from the bottom, unlock the adjustable tripod handle and move the handle to the desired height. To adjust the screen height from the top, loosen the locking sleeve ring and move the upper bar to the desired height.

TO PACK UP THE SCREEN AFTER USE

Remove the screen handle from the hanging hook.
Let the screen automatically roll back up into the housing.
Turn the assembly nut to unlock the connector and pull the connector out of the assembly nut.
Lower the bar and close the tripod.
Pack the screen and tripod into the carrying bag when not in use.

CARE/MAINTENANCE

To clean the screen, use a soft cloth, broom, or cotton ball to wipe the screen surface. Do not use detergent or other cleaning products.
Roll up the screen after every use. Leaving the screen hanging open for a long period of time may cause fabric to loosen.
When not using the screen for a long time, store the screen in the carrying bag.

CUSTOMER SERVICE

Should you experience any problems with your product, please contact us before returning the item to the place of purchase. We’re here to help!

U.S. Support: kodak@camarketing.com
844-516-1539
International Support: kodakintl@camarketing.com
844-516-1540

www.kodakphotoplus.com

The Kodak trademark. logo. and trade dress are Lised under license from Eastman Kodak Company.
All other products. brand names. company names, and logos are trademarks of their respective owners. used merely
to 1dent1fy their respective products. and are not meant to connote any sponsorship. endorsement. or approval.
@2021. C&A IP Holdings LLC. All Rights Reserved. Made in China.