HALO AD-13 Wireless Charge Pad User Manual
- June 2, 2024
- HALO
Table of Contents
Operating Instructions
PLEASE READ BEFORE OPERATING THIS EQUIPMENT
AD-13 Wireless Charge Pad
FOR ALL QUESTIONS ABOUT THE WARRANTY OR EXCHANGE REQUESTS, CONTACT US.
1-800-255-6061
THANK YOU
We appreciate your business and would like to thank you for choosing HALO!
Your safety is important to us.
Please read the instructions carefully and utilize the proper precautions
before operating this device
WARNING
Please read the following instructions for safety before use. Improper use may
result in fire, property damage or personal injury or death. DO NOT use the
product with incompatible components or alter the product in any way.
WARNING
Improper use may result in fire, property damage, or personal injury. Make
sure to use the product according to the following safety rules and
guidelines.
WARNING
Do not expose the product to any liquid or submerge in water.
SAFETY INSTRUCTIONS
Failure to follow the safety instructions can lead to fire, electrical shock, personal injury, property damage or damage to this product. Please read this entire manual.
- Do not use this unit for anything other than its intended use.
- Keep the unit away from heat sources and direct sunlight.
- Do not expose the unit to extremely high or low temperatures.
- Use this product in a location with a temperature of 32° F (0° C) – 104° F (40° C).
- Do not let the unit come into contact with water or liquid of any kind. If the unit becomes wet, immediately unplug it from the power source.
- Do not handle the unit, USB cord or wall charger with wet hands.
- Donot let dust or other debris accumulate on the product and the wall charger.
- Do not use the unit if it has been dropped or damaged in any way.
- Use the specified power source and voltage.
- Make sure the wall charger is inserted all the way into the electrical outlet. When not in use, unplug the wall chager.
PACKING LIST
| | |
---|---|---|---
15W Wireless Charging Pad| User Manual| USB-A to USB-C Cable| 18W Wall Adapter
LED INDICATOR STATUS
Standby: The LED indicator will light up white for one second when the
unit is plugged in and go into standby mode.
Charging: The LED indicator will have a slow breathing like effect. This
means the charging pad is charging your device safely. The LED will turn off
after about five times.
Abnormal: The LED indicator will pulse rapidly, indicating an abnormal or
metal obstruction has been detected.
OPERATING INSTRUCTIONS
Step 1: Connect the provided USB-A to USB-C cable to your wall adapter and
connect to an outlet.
Step 2: Place the charging pad on a flat surface.
Step 3: Place your device directly onto the center of the charging pad.
See illustrations below for examples of proper placement.
TROUBLESHOOTING
| Issue | Cause | Solutions |
|---|---|---|
| Device is not charging. | The device might not be on the charging pad properly. |
The case on the device might be too thick, preventing the device from
charging.| Remove the device and replace it onto the charging pad properly
Remove the case from the devicebefore trying to charge again.
The LED indicator is not lighting up.| The charging pad is not getting power.|
Disconnect the charging pad from the power source. Make sure
the cable and wall adapter are connected properly.
Connect the charging pad to another power source.
Flashing LED indicator| Foreign Object Detection (FOD)is triggered.
A metal object is detected by the charging pad.| Remove the metal object
between your device and the charging pad.
If your device case contains metal, then remove your case.
Disposal/recycling
**** Do not put the device and its accessories in the trash can. Items must be properly St handled in accordance with local laws and regulations. For additional information, mum Please see www.epa.gov.
Affirm
Copyrighted equipment. We all rights reserved. All trademarks cited here
are the property of their respective owners. The information contained in this
agreement is subject to change without notice. HALO is not responsible for
technical or editorial errors or omissions contained in this agreement. First
Edition: January 2023
FCC Note
Warning: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The FCC certification of this device refers to RF exposure testing performed
in typical operating conditions, where a person is no closer than 20
centimeters from the device surface at all times, except for non-repetitive
patterns with transient time intervals in the order of a second. Only in the
stated conditions, the device is shown to fully comply with the FCC RF
Exposure requirements of KDB 447498.
ALLIANCE CONSUMER GROUP
700 Henrietta Creek Rd, Roanoke, Texas 76262
Direct: 972.343.1026 | Toll-Free: 800.255.6061
www.acgbrands.com
TECHNICAL SPECIFICATIONS
INPUT
DC| QC 5V/2A, 9V/1.67A, 12V/1.5A
PD 5V/3A, 9V/2.2A
OUTPUT
Wireless| 5W/7.5W/10W/15W
Transmission Distance| Earbuds: 0.12 inches (3mm)
Phone: 0.2 inches (5mm)
Working Frequency| 110-205KHz
PRODUCT
Dimensions| 4.35 x 4.35 x 0.40 inches (11.05 x 11.05 x 1.02cm)
Weight| 0.15lb (66g)
LIMITED WARRANTY
At HALO, we are dedicated to making the best quality products. To back this up, this product is warranted. HALO warrants its products to be free frorn defects in material and workmanship under normal use. During the first 90 days from date of purchase, HALO will repair or replace the defective product. This warranty does not affect any statutory rights that you may be entitled to, Keep a copy of your purchase receipt as proof of purchase.
FOR ALL QUESTIONS ABOUT THE WARRANTY
OR EXCHANGE REQUESTS, CONTACT US.
1-800-255-6061
PRODUCT REGISTRATION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>