JOOWIN JW-WR768AC 1200Mbps Black Wifi Range Extender Installation Guide
- June 4, 2024
- JOOWIN
Table of Contents
JW-WR768AC 1200Mbps Black Wifi Range Extender
Installation Guide
Description
1-1. This is a supplement to a wireless LAN network, Which could expand the scale of WiFi. It is useful, convenient, and easy to install.
1-2. Product Structure:
Simple Installation Steps
2-1.Plug in, switch the “ON” button on the side, and the lights will all light
up
2-2.Wait for about 60s, and connect to WiFi “JOOWIN_XXX2G” or “JOOWIN XXX_5G
2-3.Log in IP “192.168.10.1”, enter the password “admin”, Click “SET PASSWORD”
2-4.Scan and select your WiFi
Without choosing “Combine wifi” or “Sync your device”
2-5. Enter your WiFi password, click “Save Setting”
2-6.Completed setting, reconnect new WIFi “XXX-2G” or “XXX-5G”
While turning on “Combine wifi”
2-7. Enter your WiFi password, click “Save Setting”
2-8. The completed setting, then reconnect the new WiFi “XXX-2G&5G”
While turning on “Sync your device”
2-9. Enter your WiFi password, click “Save Setting”
2-10. In the completed setting, the extended wifi name will be the same as
your own wifi. There is no need t connect the extended wifi.
(Note: The defaulted network segment is 192.168.10.1, if the superior network is also 192.168.10.1, please modify the repeat or superior network or bridge mode in the advanced setting)
Setup with Webpage
3-1. Plug in and switch the “ON” button on the side, then the lights will all
light up.
3-2. Wait for about 60s, and connect WIFi “JOOWIN-XXX-2G” or “JOOWIN XXX-5G”
with your smartphone or computer. (Keep your smartphone or computer connected
to the extender during the installation.)
3-3. When the extender is set up for the first time, the configuration webpage
will pop up automatically. If not, launch a web browser and enter
“192.168.10.1” in the address field
3-4. Enter the default password “admin” and click “SET PASSWORD”
. It will scan the wireless network signals around. Then select the WiFi you
want to extend.
Without choosing “Combine wifi” or “Sync your device”
3-5. Enter your WiFi password, then click the “Save Setting”.
3-6. After the setup is complete, it will reboot automatically. Then reconnect
WiFi “XXX-2G or XXX-5G”(your new extender WiFi), the password is your original
WiFi password, and enjoy the WiFi While turning on “Combine wifi”
3-7. Enter your WiFi password, then click the “Save Setting”.
3-8 After the setup is complete, it will reboot automatically. Then reconnect
WiFi “XXX-2G&5G”(your new extender WiFi), the password is your original WiFi
password, and enjoy the WiFi.
While turning on “Sync your device”
3-9. Enter your WiFi password, then click the “Save Setting”.
3-10. After the setup is complete, the extended wifi name will be the same as
your own wifi. There is no need to reconnect the extended wifi after being set
up successfully, you can directly enjoy the WiFi.
Q&A
Q1-What’s the role of a WiFi extender?****
A: Boosts the range of your existing WiFi and creates a stronger signal in hard-to-reach areas. Please note that it can’t increase the wifi speed of your router, the speed of the extending wifi will be reduced.
Q2-Where shall I place the WiFi extender?****
A: We would suggest that after setting up successfully, please move this wifi extender halfway between your router and your weak signal area. The location that you choose must be within the range of your existing WiFi router network.
Q3-How to reset the WiFi extender?****
A: Press the WPS/Reset button of your extender for 10 seconds,
wait to restore factory settings, when the lamp will go out and then light up
again, and you can begin to set up it again.
Q4-Why the wifi keeps disconnecting?****
A: Firstly we suggest resetting the wifi extender.
If the wifi keeps disconnecting, we suggest updating the firmware:
1. Go to www.joo-win.com, and choose “Download”.
2. Search ” JW-WR768AC” and download the firmware.
3. Load in the IP” 192.168.10.1 “.
4. Click ” System Tools ” on the upper right corner, choose ” Upgrade
Firmware”, then upload the file you downloaded, and click “Upload “.
If you still have wifi disconnecting problem, please contact us via
joowinservice@163.com.
Q5-What if the wifi extender has broken?****
A: We always offer friendly customer service for every customer. If there have any problems, please don’t hesitate to contact us via joowinservice@163.com, and we will solve them as soon as possible.
http://www.joo-win.com
Searching “JW-WR768AC”, then download the firmware or the manual.
Maintenance Regulations
Thank you for purchasing Joouio products and services to protect your rights, please read the following maintenance regulations.
The following does not belong to free maintenance, our company can provide paid service, please note:
-
Failure to require the installation manual, use, maintenance, and storage lead to product failure or damage;
·Beyond the limited warranty, the warranty period; Unautorized alteratiion -
Without authorization to change the settings file or inherent disassemble without authorization;
-
Unexpected factors or human actions lead to product damage, such as improper input voltage, temperature, water mechanical damage, break, rust, or serious oxidation of the product, etc;
After-sales feedback:
Customer Data Name|
---|---
Address|
Model|
Mac Address|
Machine unit sales|
Sale of the machine address|
Date|
Tel|
Postcode|
Invoice no|
Manufacturer: JOOWIN E-Commerce Co., Ltd.
Address: Room 703-705, Block B Tao JINDI Electronic
Business Incubation Base, Tenglong Road, Longhua District,
Shenzhen, China
Email: joowinservice@l63.com
Website: wwwjoo-win.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>