DC1600 Sereis Single Channel Emitter

Product Information

Specifications

• Model Number: DC1600/DC1600A
• FCC ID: 2BDP7-20241818
• Compliance: Part 15 of the FCC Rules

Product Usage Instructions

1. Safety Precautions

Please read and understand the following safety precautions
before using the DC1600/DC1600A Single-channel Emitter:

• Do not modify or make any changes to the unit that are not
  expressly approved by the responsible party for compliance. Doing
  so may void the user’s authority to operate the equipment.

• Ensure that the device is used in accordance with the FCC Rules
  to avoid harmful interference.

• Keep the device away from water, moisture, and extreme
  temperatures.

• Avoid exposing the device to direct sunlight or heat
  sources.

• Do not use the device if it appears damaged or if there are any
  signs of malfunction.

2. Product Overview

The DC1600/DC1600A Single-channel Emitter is a device designed
to emit signals for wireless communication. It is compliant with
Part 15 of the FCC Rules and operates within the frequency range
specified by the regulations. The emitter can be used in various
applications that require wireless transmission of data or control
signals.

3. Installation

To install and set up the DC1600/DC1600A Single-channel Emitter,
please follow these steps:

1. Choose a suitable location for the emitter, ensuring it is
   within the specified operating range.

2. Connect the power supply to the emitter using the provided
   cables.

3. Ensure that all connections are secure and properly
   tightened.

4. Power on the emitter and verify that the LED indicator lights
   up, indicating it is ready for operation.

4. Operation

Once the DC1600/DC1600A Single-channel Emitter is properly
installed, follow these instructions to operate it:

1. Ensure that the device or system you wish to communicate with
   is compatible with the emitter’s signal.

2. Configure the emitter’s settings according to your specific
   requirements (if applicable).

3. Initiate the transmission process by sending the appropriate
   command or data from the connected device or system.

4. The emitter will emit the signal, which can be received by
   compatible receivers within the operating range.

5. Maintenance

To ensure optimal performance and longevity of the
DC1600/DC1600A Single-channel Emitter, please follow these
maintenance guidelines:

• Regularly clean the device using a soft, dry cloth to remove
  dust and debris.

• Avoid using harsh chemicals or solvents that may damage the
  device’s surface.

• Inspect cables and connections periodically to ensure they are
  intact and functioning correctly.

• If any issues or abnormalities are observed, discontinue use
  and contact customer support for assistance.

Frequently Asked Questions (FAQ)

Q1: Can I modify the DC1600/DC1600A Single-channel

Emitter?

A1: No, any changes or modifications to the unit not expressly
approved by the responsible party for compliance may void the
user’s authority to operate the equipment.

Q2: What should I do if the emitter stops working?

A2: If the emitter stops working or shows signs of malfunction,
please discontinue use and contact customer support for
assistance.

Q3: Can the DC1600/DC1600A Single-channel Emitter be used

outdoors?

A3: It is recommended to use the emitter in indoor environments
and avoid exposure to water, moisture, and extreme
temperatures.

DC1600/DC1600A
Single-channel Emitter Instruction
Model number: DC1600/DC1600A FCC ID: 2BDP7-20241818

This device complies with Part 15 of the FCC Rules. Opera on is subject to the following two condi ons: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera on.
Warning: Any changes or modifica ons to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec on against harmful interference in a residen al installa on. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc ons, may cause harmful interference to radio communica ons. However, there is no guarantee that interference will not occur in a par cular installa on. If this equipment does cause harmful interference to radio or television recep on, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separa on between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>