Keonjinn K1MIFZ003A 36 x 24 Inch Dimmable Mirror User Manual

Keonjinn K1MIFZ003A 36 x 24 Inch Dimmable Mirror

BEFORE INSTALLATION

Thank you very much for using Keonjinn products, to facilitate the use of Keonjinn products, please read this instruction carefully before you begin installation.

1. Important Safety Instructions:

   • Please read all instructions carefully before assembling the item.
   • Assembly by two or more adults is highly recommended.
   • To connect the wires to the electrical junction box, a qualified technician or electrician is highly recommended.
   • Disconnect power before installing, adding, or changing any components.
   • Ensure that the fixing location can take the weight of the complete fitting. (solid stone/brick walls).
   • To prevent injury, the mirror must be installed according to these instructions.

2. Pre-assembly:

   • After opening the package, inspect the product immediately upon receipt for transit damage or missing parts.
   • Keep the voltages between 100V and 240V. If the voltage exceeds 240V, please use a transformer.
   • You can connect the wires directly to your junction box or the plug.
   • Do not remove the transparent silicone protector before completing the installation.

3. Before installation, please check to make sure the mirror is working properly :
   After connecting the power, the two round buttons will turn white. At the moment the LED and anti-fog function are already turned on automatically. If you don’t need to use any one of them, just touch it to turn it off, then the button will be dimmed.
   Memory Function: The status of two buttons will have been memorized in the mirror. The next time you open the mirror it will be in the same state it was in before it was last closed, which means that you don’t have to touch the buttons each time.

   • The above button is the anti-fog switch .
     When you are not using it, remember to turn off the switch to prevent wasting energy.
     Anti-fog film working principle: Anti-fog film converts electric energy into heat energy efficiently, and transmits heat directly to the mirror surface to warm the mirror surface. The specific power is kept at a constant temperature, which effectively prevents water vapor from condensing on the surface of the mirror and acts as an anti-fog.

   • The below button is the smart switch .
     If you want to adjust different brightness, keep holding the smart switch, and the brightness will change.

CONTACT US

Note : After opening the package, Please inspect the product immediately for damage in transit or missing parts. If there is help missing, please contact us at (sales@keonjinn.com). or you can contact us at Amazon by following these steps:

• Open “Orders” at Amazon
• Find the product you have purchased and open the product page
• Click Sold by “Keonjinn” -Click”Ask a question”
• Click “An order I have placed”
• Click “Your product” -Click “Other” -Click “Troubleshooting”
  Then you can send us messages, we will reply within 24 hours.

PACKING LIST

• Wall anchors
• Screws
• Plug
• LED Mirror

INSTALLATION TOOLS

• Level
• Pencil
• Hammer
• Safety Goggles
• Electric Drill
• Phillips Screwdriver
• Tape Measure

PRODUCT DESCRIPTION

PRODUCT STYLE

Mounting Method

The mirror can be mounted either Horizontally or Vertically, so there are 8 mounting points on the back of the mirror. Please confirm whether the wall mount is Horizontal or Vertical before installation.

• Vertically
  Vertically hanging: Please measure the mounting points of “A1” and “A2”; and the mounting points of “A3” and “A4”.

• Horizontally
  Horizontally hanging: Please measure the mounting points of “B1” and “B2”; and the mounting points of “B3” and “B4”.

INSTALLATION OF LED MIRROR

• Open the carton and make sure all the parts listed below are present.
  Note: Please don’t remove the silicone corner protector before completing the installation.

• Mounting point measurement
  Measure the distance of the four hooks’ center and use the level ruler to draw a horizontal line on the wall and then mark the location of the center of the hooks.

• Drill pilot holes on the marked spots
  Use an electric drill to punch four 6mm holes at the marked spots, and then apply wall anchors with a hammer. (6mm drill bit, drilling depth in 5 cm).

• Insert the screw
  Use a screwdriver to screw the screws into the wall anchors. Leave a distance of 7 mm from the wall.
  

Connect the power

There are three power wires behind the mirror, including the live wire (black), the neutral wire (white), and the ground wire (green). You can connect the wires to a standard switched lighting circuit or plug.
If you want to connect power wires to the plug, you can refer to the steps:

1. Remove the plug cover.
2. Unscrew the screws on each of the plug’s pins.
3. Insert the twisted copper wires into the holes in the pins.
4. Tighten the little screw on each of the plug’s pins.
5. Make sure the wire is tightly clamped by the brake or clip.
6. Replace the cover of the plug.
   Other power connection methods are on the same principle.

Mount the mirror on the wall and ensure it is sturdy WALL

Note: After the installation is completed, please remove the silicone corner protector.

PRODUCT SPECIFICATION

Dimensions (L x W)| Watts| Lumens (Front-lighted)| Lumens (Backlit)
---|---|---|---
20″L x 28″W| 24W| 2390LM| 2736LM
24″L x 32″W| 24W| 2900LM| 3380LM
24″L x 36″W| 36W| 3172LM| 3745LM
28″L × 36″W| 36W| 3432LM| 3900LM
30″L x 36″W| 36W| 3640LM| 4134LM
36″L x 36″W| 36W| 4030LM| 4550LM
40″L x 24″W| 36W| 3432LM| 3900LM
40″L x 28″W| 36W| 3502LM| 4086LM
40″L x 32″W| 36W| 4030LM| 4590LM
48″L x 24″W| 36W| 3672LM| 4524LM
48″L x 28″W| 36W| 3955LM| 4567LM
48″L x 32″W| 45W| 4550LM| 5100LM
48″L x 36″W| 45W| 4992LM| 5200LM
55″L x 36″W| 45W| 5226LM| 5840LM
60″L x 28″W| 45W| 5000LM| 5330LM
60″L x 36″W| 45W| 5136LM| 5850LM
60″L x 40″W| 45W| 5376LM| 6110LM
72″L x 30″W| 45W| 5980LM| 6500LM
72″L x 36″W| 45W| 6885LM| 7020LM
Parameter| Specification
---|---
Color Temperature| 6000K
Input Voltage| AC100-240V
Output Voltage| 12V DC
CRI (Color Rendering Index)| ≥90 Ra
Working Temperature| -20~50°C
Life Span| ≥20000 hours
Anti-fog| Yes
Safety Compliance| ETL
IP Rate| IP54
Mirror Glass Thickness| 5 mm
Wiring Method| Hardwired / Plugin
Switch| Touch Sensor Switch
Mounting Method| Wall Mount

USE AND CLEANING INSTRUCTION

To keep the LED mirror looking perfect, we suggest using and cleaning the mirror regularly.

1. Please use in a safe voltage range. (100V-240V)
2. Use electrical tape to wrap around the wires to prevent leakage.
3. Do not strike mirror glass with hard or pointed items.

Please obey the following procedure when you clean the mirror.

1. It is recommended that the product is cleaned with a soft, nonabrasive cloth.
2. Do not use Irritating cleaning agents or abrasive materials on any type of finished surface. Please use the following cleanser to remove the dirt.

• Gentle liquid detergent.
• Colorless cleanser.

Product Warranty
Manufacturer warranty for 1 year from date of purchase.
If you have any problem, please feel free to contact us at sales@keonjinn.com

FAQs

What are the dimensions of the Keonjinn K1MIFZ003A mirror?

The Keonjinn K1MIFZ003A mirror has dimensions of 36 x 24 inches, providing ample size for bathroom vanities or other areas where a clear, large reflection is desired.

Is the Keonjinn K1MIFZ003A mirror dimmable?

Yes, the Keonjinn K1MIFZ003A mirror features a dimmable function, allowing users to adjust the brightness of the LED lights to their preference, which enhances the ambiance of any room.

Can the Keonjinn K1MIFZ003A be mounted both vertically and horizontally?

The Keonjinn K1MIFZ003A is designed with versatility in mind, allowing for both vertical and horizontal mounting to fit various space requirements and design aesthetics.

What type of lighting does the Keonjinn K1MIFZ003A mirror use?

The Keonjinn K1MIFZ003A mirror uses LED lighting, known for its efficiency, longevity, and clear, bright light, making it ideal for grooming tasks.

Is there an anti-fog feature on the Keonjinn K1MIFZ003A mirror?

While the specific details regarding an anti-fog feature are not mentioned, many high-end mirrors like the Keonjinn K1MIFZ003A come equipped with such functionalities to ensure clear visibility in humid conditions.

How is the Keonjinn K1MIFZ003A mirror powered?

The Keonjinn K1MIFZ003A mirror is typically powered by a standard electrical connection, which supplies power to the LED lights for dimming functionality. Installation should be done according to local electrical codes and standards.

What is the color temperature of the LED lights in the Keonjinn K1MIFZ003A?

LED lights in mirrors like the Keonjinn K1MIFZ003A often have a color temperature ranging from warm white to cool white, enabling users to select the most flattering and functional lighting for makeup application or shaving.

How do you clean the Keonjinn K1MIFZ003A mirror?

The Keonjinn K1MIFZ003A mirror should be cleaned with a soft, dry cloth for the LED components and a non-abrasive cleaner for the glass to avoid scratching the surface or damaging the mirror's functionality.

Is the Keonjinn K1MIFZ003A mirror easy to install?

The Keonjinn K1MIFZ003A mirror is designed for straightforward installation, but it's recommended to follow the manufacturer's instructions closely or consider professional installation to ensure safety and proper operation.

What is the frame material of the Keonjinn K1MIFZ003A mirror?

The Keonjinn K1MIFZ003A mirror typically features a sleek, frameless design that accentuates its modern appearance and allows it to blend seamlessly with a variety of decor styles.

Can the brightness level of the Keonjinn K1MIFZ003A mirror be saved?

Some mirrors, including potentially the Keonjinn K1MIFZ003A, offer memory function features that save your preferred brightness settings for convenience, although specifics should be confirmed with the product details.

Is the Keonjinn K1MIFZ003A mirror suitable for commercial use?

Given its size, dimmable LED lighting, and contemporary design, the Keonjinn K1MIFZ003A mirror can be suitable for commercial settings such as hotels, salons, or boutiques, enhancing the functionality and aesthetics of the space.

What safety features does the Keonjinn K1MIFZ003A mirror have?

The Keonjinn K1MIFZ003A mirror is likely to include safety features such as shatter-proof technology and UL certification for its electrical components, but it's essential to consult the product specifications for detailed safety information.

Video- Keonjinn bathroom mirror with lights 6000k

Download Manual:Keonjinn K1MIFZ003A 36 x 24 Inch Dimmable Mirror User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>