KEONJINN HZ-02A-6456-BT Hollywood Vanity Mirror Installation Guide

KEONJINN HZ-02A-6456-BT Hollywood Vanity Mirror

Product Information

• This device is a vanity mirror with LED bulbs and USB ports.
• It complies with FCC RF radiation exposure limits and Part 15 of the FCC rules.
• The device should not be modified without approval, as it may void the user’s authority to operate it.
• It should not be co-located or operated with any other antenna or transmitter.
• The device must be operated with a minimum distance of 20 cm between the radiator and the user’s body.

Product Usage Instructions

1. Take out the 2 covers from the bottom of the mirror.
2. Take out the 4 screws from the bases of the mirror.
3. Install the two bases with the screws.
4. Plug LED bulbs into the USB ports on the mirror.
5. After installing all the bulbs, connect the adapter and turn the mirror on.

Bulb Usage Instructions

1. Plug in all bulbs before powering on the mirror.
2. Avoid touching the bulb base directly after the mirror is on to prevent electric shocks.
3. To remove a bulb, turn off the mirror first, hold it tightly, and pull it out.
4. Do not plug other USB devices into any port on the mirror.
5. Do not install the bulb into the USB port of any other devices.

Mounting Instructions

• Measure the distance between two mounting holes and mark a horizontal line on the wall with a lever.
• Drill holes at the marked spots and apply the wall anchors.
• Slightly loosen the screws from the anchors, leaving a 7mm gap in the wall.
• Mount the mirror and ensure it is firmly hung.
• If attaching the mirror to the wall, put the covers back after removing the bases.

Button Usage Instructions

1. Press the button to gradually light up the bulbs to avoid sudden dazzling light.
2. Press the button to select the color temperature of the bulb (warm, natural, cool).
3. Press the button to adjust the brightness of the bulb (five levels) or touch and hold it to switch the brightness.
4. Use the USB ports to connect and charge smart devices when no socket is within reach.

Bluetooth Usage Instructions

1. Turn on the mirror.
2. Connect the Vanity Mirror through the mobile phone’s Bluetooth function.
3. Play songs in your mobile phone through the connected Vanity Mirror.

If you have any questions, please feel free to contact us at sales@keonjinn.com.
Note: The adapter should be installed near the equipment and easily accessible. The plug serves as a disconnect device for the adapter.

Installation Instructions

Installation Instructions: Free Standing

• STEP 1
  Take out 2 covers from the bottom.

• STEP 2
  Take out 4 screws from the bases.

• STEP 3
  Install the two bases with the screws.

• STEP 4
  Plug LED bulbs into the USB ports on the mirror.

• STEP 5
  After installing all the bulbs, connect the adapter and turn the mirror on.

NOTE:

1. Please plug in all bulbs before powering on.
2. Please do not touch the bulb base directly after the mirror is on, in order to avoid possible electric shocks.
3. When a bulb needs to be removed, please turn off the mirror first, then hold it tightly and pull it out.
4. Do not plug other USB devices into any port on the mirror.
5. Do not install the bulb into the USB port of any other devices.

Installation Instructions: Wall-Mounted

TOOLS REQUIRED

• STEP 1
  Measure the distance betweentwo mounting holes, and draw a horizontal line of the same distance on the wall with a lever, then mark the spots.

• STEP 2
  Drill holes at the marked spots and apply the wall anchors.

• STEP 3
  Slightly loosen the screws from the anchors, with a 7mm gap to the wall. Then mount the mirror and make sure it’s hang firmly.

NOTE: If you want to attach the mirror to the wall, please put the covers back after you remove the bases.

How to Use

• ON / OFF
  Press the button and the bulbs will be gradually lit up to avoid a sudden dazzling light.

• Color Temperature Selection
  Press and select the color temperature of the bulb, with three options (warm, natural, cool) available.

• Brightness Adjustment
  Press to adiust the brightness of the bulb (five brightness levels to choose), or touch and hold it to switch the brightness.

• USB Port
  Connect and charge smart devices when there is no socket within reach .

Bluetooth Function

1. Turn on the mirror;
2. Connect ” Vanity Mirror ” through the mobile phone’s bluetooth function;
3. Play the songs in your mobile phone.

Specifications

Adapter shall be installed near the equipment and shall be easily accessible. The plug is considered as a disconnect device of an adapter.

FCC

FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to thefollowing two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful I interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device must operate with a minimum distance of 20 cm between the radiator and the user body. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement This device complies with FCC R radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>