KEONJINN 28LX20W LED Mirror Bathroom Light Instruction Manual
- June 15, 2024
- KEONJINN
Table of Contents
KEONJINN 28LX20W LED Mirror Bathroom Light Instruction Manual
BEFORE INSTALLATION
⚠ Thank you very much for using Keonjinn products, in order to facilitate the use of Keonjinn products, please read this instruction carefully before you begin installation.
-
Important Safety Instructions:
• Please read all instructions carefully before assembling the item.
• Assembly by two or more adults is highly recommended.
• To connect the wires to electrical junction box, a qualified technician or electrician is highly recommended.
• Disconnect power before installing, adding or changing any components.
• Ensure that the fixing location is able to take the weight of the
complete fitting. (solid stone/ brick walls).
• To prevent injury, the mirror must be installed according to these instructions. -
Pre-assembly:
• After opening the package, inspect the product immediately upon receipt for transit damage or missing parts.
• Keep the voltages between 1 00V and 240V. If the voltage exceeds 240V, please use transformer.
• You can connect the wires directly to your junction box or the plug.
• Do not remove the transparent silicone protector before completing the installation. -
Before installation, please check to make sure the mirror is working properly :
After connecting the power, the two round buttons will turn white. At the moment the LED and anti-fog function are already tum on automatically. If you don’t need to use any one of them, just touch it to turn it off, then the button will be dimmed.
Memory Function : The status of two buttons will have been memorized in the mirror. The next time you open the mirror it will be in the same state it was in before it was last closed, which means that you don’t have to touch the buttons each time.
(1) The above button is the anti-fog switch.
When you are not using it, remember to turn off the switch to prevent wasting energy.
Anti-fog film working principle: Anti-fog film converts electric energy into heat energy efficiently, and transmits heat directly to the mirror surface to warm the mirror surface. The specific power is kept at a constant temperature, which effectively prevents water vapor from condensing on the surface of the mirror and acts as an anti-fog.
(2) The below button is the smart switch.
If you want to adjust different brightness, keep holding the smart switch, and the brightness will change.
CONTACT US
Note: After opening the package, Please inspect the product immediately for
damage in transit or missing parts. If there is help
any missing, Please contact us by
([email protected]). or you can contact us at
Amazon by following these steps:
– Open “Orders” at Amazon
– Find the product you have purchased and open the product page
– Click Sold by “Keonjinn” -Click”Ask a question”
– Click “An order I have placed”
– Click “Your product” -Click “Other” -Click “Troubleshooting”
Then you can send us messages. we will reply within 24 hours.
PACKING LIST
INSTALLATION TOOLS
PRODUCT DESCRIPTOIN
PRODUCT STYLE
Mounting Method
The mirror can be mounted either Horizontally or Vertically, so there are 8 mounting points on the back of mirror. Please confirm the wall mount Horizontally or Vertically before installation.
INSTALLATION OF LED MIRROR
PRODUCT SPECIFICATION
USE AND CLEANING INSTRUCTION
⚠ In order to keep the LED mirror look perfectly, we suggest using and cleaning the mirror regularly.
- Please use in safe voltage range. (1 00V-240V)
- Use electrical tape to wrap around the wires to prevent leakage.
- Do not strike mirror glass with hard or pointed items.
⚠ Please obey the following procedure when you clean the mirror.
- It is recommended that the product is cleaned with a soft, non abrasive cloth.
- Do not use Irritating cleaning agents or abrasive materials on any type of finished surface. Please use the any following cleanser to remove the dirt.
✅ Gentle liquid detergent.
✅ Colorless cleanser.
- Product Warranty
Manufacturer warranty for 1 year from date of purchase.
If you have any problem, please feel free to contact us on [email protected]