KEONJINN B0BXSHQCQ8 Bathroom LED Mirror Instruction Manual

KEONJINN B0BXSHQCQ8 Bathroom LED Mirror

Product Information

Specifications

• Dimension
  • 24 x 36
  • 28 x 36
  • 40 x 24
  • 40 x 32
  • 48 x 30
  • 60 x 36
  • 72 x 36
• Size
  • 61 x 91 x 3.6cm
  • 71 x 91 x 3.6 cm
  • 101 x 61 x 3.6 cm
  • 101 x 81 x 3.6 cm
  • 121 x 76 x 3.6 cm
  • 152 x 91 x 3.6 cm
  • 182 x 91 x 3.6cm
• Watts
  • 36W
  • 36W
  • 36W
  • 36W
  • 36W
  • 48W
  • 60W
• Lumens
  • 5500LM
  • 6000LM
  • 6200LM
  • 7000LM
  • 7600LM
  • 9700LM
  • 11000LM
• PARAMETER
  • Color Temperature
  • Input Voltage
  • Output Voltage
  • CRI
  • Working Temperature
  • Life Span
  • Anti-fog
  • Nema Rate
• Wiring Method: Hardwired / Plug In
• Switch: Touch Sensor & Microwave inductive

Product Usage Instructions

Important Safety Instructions

1. Please read all instructions carefully before assembling the item.
2. Assembly by two or more adults is highly recommended.
3. To connect the wires to electrical junction box, a qualified technician or electrician is highly recommended.
4. Disconnect power before installing, adding, or changing any components.
5. Ensure that the fixing location is able to take the weight of the complete fitting (solid stone/brick walls).
6. To prevent injury, the mirror must be installed according to these instructions.

Pre-assembly

1. After opening the package, inspect the product immediately upon receipt for transit damage or missing parts.
2. Keep the voltages between 100V and 120V. If the voltage exceeds 120V, please use a transformer.
3. You can connect the wires directly to your junction box or the plug.

Installation

1. Lift the mirror against the wall and keep an appropriate safety distance from the faucet.
2. Confirm the installation position and installation height of the bracket.
3. Use a spirit level to level the bracket and mark the hole position on the wall.

FAQ

Q: What should I do if there are missing parts or transit damage?
A: If there are any missing parts or transit damage, please contact us at sales@keonjinn.com or follow these steps on Amazon

1. Open Orders at Amazon.
2. Find the product you have purchased and open the product page.
3. Click Sold by keonjinn.
4. Click Ask a question.
5. Click An order I have placed.
6. Click Your product.
7. Click Other.
8. Click Troubleshooting.

Then you can send us a message and we will reply within 24 hours.

• Q: How do I turn on the defogging function?
  A: The defogging function is controlled by the right button on the mirror. Click the button to turn ON or OFF the defogging function. To prevent the mirror from overheating, the defogging function will automatically turn off after one hour.

• Q: How do I turn on the Radar sensor light switch?
  A: To turn ON or OFF the Radar sensor light switch, double click the button on the mirror.

Installation Instruction

If you have any problem, please feel free to contact us on sales@keonjinn.com

CONTACT US

Note: After opening the package, Please inspect the product immediately for damage in transit or missing parts. If there is any missing, Please contact us by (sales@keonjinn.com) or you can contact us at Amazon by following these steps:

• Open “Orders” at Amazon
• Find the product you have purchased and open the product page
• Click Sold by “keonjinn” -Click”Ask a question”
• Click “An order I have placed”
• Click “Your product” -Click “Other” -Click “Troubleshooting” Then you can send us messages,we will reply within 24 hours.

Packing list

Manufacturer warranty for 2 year from date of purchase.

USE INSTRUCTION

1. Please use in safe voltage range. (100V-120V)
2. Use electrical tape to wrap around the wires to prevent leakage.
3. Do not strike mirror glass with hard or pointed items.

DANGER: Before installation, make sure the main power is cut off.
WARNING: Installation must be performed by a qualified licensed electrician.

BEFORE INSTALLATION

Note : Thank you very much for using keonjinn products, in order to facilitate the use of keonjinn products, please read this instruction carefully before you begin installation.

1. Important Safety Instructions
   • Please read all instructions carefully before assembling the item.
   • Assembly by two or more adults is highly recommended.
   • To connect the wires to electrical junction box, a qualified technician or electrician is highly recommended.
   • Disconnect power before installing, adding or changing any components.
   • Ensure that the fixing location is able to take the weight of the complete fitting. (solid stone / brick walls).
   • To prevent injury, the mirror must be installed according to these instructions.
2. Pre-assembly
   • After opening the package, inspect the product immediately upon receipt for transit damage or missing parts.
   • Keep the voltages between 100V and 120V. If the voltage exceeds 120V, please use transformer.
   • You can connect the wires directly to your junction box or the plug.

Before installation, please check to make sure the mirror is working properly

1. The right button is the anti-fog and Radar sensor light switch.

   • Click the button to turn ON or OFF the defogging function. To prevent the mirror from overheating, the defogging function will automatically turn off after one hour.
   • Double click to turn ON or OFF the Radar sensor light switch.

2. The middle button is the light touch button.

   • Click to turn ON or OFF the lights.
   • Press and hold it to infinitely adjust the brightness.
   • Double click to switch three color temperatures. With power-off memory function, it will remain the same color temperature and brightness as the last time it was turned off.

3. The left button is the Radar motion sensor.

   • When the light of the left button is on, it means the Radar sensor is on, and when it is not on, it means the Radar sensor is off. The sensing range is 3.6-4.25 ft, the light will automatically turn on after sensing a person, and will be off after the person walks away after 30 seconds.
   • Note : The Radar sensor is not turned on ON or OFF by this button, but by double-clicking the rightmost button to turn it ON or OFF.

INSTALLATION

Installation tools

1. Before installation, please lift the mirror against the wall, keep an appropriate safety distance from the faucet, confirm the installation position and installation height of the bracket, use a spirit level to level the bracket, and mark the hole position on the wall.
   The mirror can be hung horizontally or vertically. You can choose the hanging method according to your preference. Here is the vertical hanging installation method, the horizontal hanging is the same.

2. Use an electric drill to punch holes at the marked spots, and then apply wall anchors with hammer.

3. Mount the bracket to the wall with screws.

4. Connect the power. You can use the plug directly or connect the wire to a standard switch lighting circuit.
   Installation hardwired

   • BLACK WIRE — POWER SUPPLY L (LIVE)

   • WHITE WIRE — POWER SUPPLY N (NEUTRAL)

   • GREEN WIRE — POWER SUPPLY E (EARTH)

   • WARNING : This mirror must be earthed. DANGER : Before installation, make sure the main power is cut off.
     Installation plug

   • If you want to connect power wires to plug, you can refer to the steps:

   • Remove the plug cover.

   • Unscrew the screws on each of the plug’s pins.

   • Insert the twisted copper wires into the holes in the pins.

   • Tighten the small screw on each plug pin to ensure that the wire is tightly clamped by the clip.

   • Install the wire brake to prevent the wire from pulling out.

   • Put on the cover of the plug.

5. Place the mirror against the wall, align the hook with the bracket slot, slowly lower it so that the hook fits into the slot, and gently shake the mirror to ensure that the mirror is securely installed.

PRODUCT SPECIFICATION

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>