Annlov AC 01 Dash Camera User Manual

Annlov AC 01 Dash Camera

User Manual

Thank you for you choosing Annlov AC01 dash camera, please read this user manual carefully before use, and keep it for future reference if you need any assistance, please feel free to contact our customer support team by email [email protected].

Main features

1. The size is only 90mm x 29mm x 38mm,without LCD screen. The small size and all black form factor make it very stealthy.
2. Camera body supports 360° rotation, easy to adjust lens direction if it is necessary.
3. 150° ultra wide angle lens, equipped with low light IDCMOR sensor, offering enhanced video quality at night.
4. It uses two super capacitor instead of battery, which is a better choice to operate dash cam in hot environments (batteries tend to swell / expand in the heat)
5. W’i-Fi connection to view footage, download videos, share videos share videos and change setting via an app on your iphone or Android device.
6. Voice indicator feature, easy to know camera’s exact working status, as video start/stop, card error, etc.
7. Comes with parking mode function, which is triggered by G-sensor. When an impact is detected by the G-sensor, the camera starts video recording for 30 seconds automatically. (The hardwire kit needed for parking mode is not included in standard package, buyer need to buy it separately.)

Structure diagram

Package contents

Button Function & LED Indicator

Specifications

Basic operation

Installation diagram

Installation

1. Insert a memory card to camera
2. Attach camera to the window with adhesive mount Before the device can be used in a car, it is essential to first install a properly attached window with adhesive mount Make sure that you place the camera in a safe, appropriate location where it will not obstruct the driver’s view.
3. Connect the USB charger to the car’s 12V DC Outlet/ Cigarette lighter to start recording. Do not remove card during camera recording.
4. When not in use, to disconnect USB charger and slide camera off its adhesive mount to take away the camera with you.

Insert/remove Micro SD card

1. Format the card as FAT32 by computer before use; You can use GuiFormat for formatting 64Gb card as FAT32.
2. Insert one micro SD card (Class 10 grade,16GB or above) into camera and push until it locks into place.
3. To remove the micro SD card first stop recording or disconnect camera from power and then press the end of the micro SD card until it clicks out from slot.

Take Recording

Camera will start recording automatically when plugged into the car cigarette lighter socket, no need extra operation. The LED indicator light flashes during video recording. If camera WIFI connection is off, the LED flashes red during video recording; if camera WIFI connection is on, the led flashes green during video recording.

Lock video clip

1. Short press “lock button” from the side of the camera to lock video clips manually
2. Video clips will be Locked automatically when G-sensor triggered by some shock

Wi-Fi Switch On/Off

1. Long press lock” button for 5 seconds to switch Wi-Fi function On/Off.
2. Its led light indicates red when Wi-Fi Off; Its led light indicates Green when Wi-Fi On.

Parking Mode recording

1. Camera needs permanent power source for parking mode to work. For example, you can use a 5V/1.5A power bank, or a 12V to 5V hardwire kit connected to your car 12v always on ACC slot from fuse box (or power directly to your car battery) .
2. Press ‘stop video’ button in mobile phone APP to activate parking mode before leaving your car.
3. During parking mode, camera will record video for 30 seconds automatically when an impact is detected by the G-sensor.

Note: The powerbank or hardwire kits are NOT Included in package. buyer needs to buy separately.

APP operation

APP Download

Search AnnlovDVR in APP Store for IOS users; Search AnnlovDVR in Google Play Store for Android phone users;

WIFI Connection

1. Enable WIFI on your mobile device setting menu, find dash cam SSID B1W_CO2 ., Input passport 1234567890 to continue.
2. Open the App, Click “Connect” icon to connect the dash cam.

APP Control

1. In APP Preview mode, press “video recording” button to start/ stop video recording;

2. In APP Preview mode, press “photo snap button” to capture photo;

3. In APP Preview mode, press the menu button on the top right corner to enter main menu setup;
   In its sub-menu setup, you can set its resolution 1080p/720p; Sound recording On/Off; Video clip length 1/3/5mins;G-sensor level Low/Middle/High; Format memory Card, Sync local time to camera etc.

4. In APP Preview mode, press “video playback” button to playback videos; And also, you can choose video clips to download to mobile phone if necessary.

5. In APP Preview mode, press Disconnect button on the top left corner to back to dash camera connection interface.

In APP Preview mode, press “video playback” button to playback videos;And also,you can choose video clips to download to mobile phone if necessary.

Note: You cannot hear its audio in preview mode, but you can hear its audio after you download this video to your mobile phone.

Video resolution

1. 1920x1080p 30fps;1080x720p 30fps two resolution options available
2. Press video resolution to select 1080p or 720p resolution. Default resolution is 1080p.

Loop Recording(video segmentation)

1. Loop recording mode can not be switched off.
2. The camera will continuously erase older video as it records new video. But please note any locked video files on memory card will remain protected, and will not be automatically deleted during loop recording.
3. Press video clip length to select the desired 1/3/5 mins.

Date & Time Stamp(Time watermark)

1. You have the option to print date/time over the videos at the corner.
2. Date/Time stamp can not be removed from videos if this feature was enabled when video recording.
3. Default stamp setup ON, you can switch Date/time stamp OFF in APP.

Audio/Sound recording

1. You have the option to record audio with videcor turn off microphone so that all recorded videos will be muted.
2. Default audio recording mode is ON, you can switch Audio recording OFF in APP.

Voice prompts

1. Voice prompt default as on.
2. By toggling the “Voice prompts” slider in APP to turn off voice notifications. This camera will operate in silence.

Date & Time Setup

1. Date/Time in this format YY/MM/DD HH:MM:SS
2. Press Sync phone time button to sync local time to the camera

WiFi pwd

Changes the password for Wi-Fi access to the camera so that other people can’t view the live video or change your settings. If users have changed the default WiFi SSID and its password and have forgotten it. If this happens you can contact CS for help to reset,or visit our official website to download its WiFi Reset firmware.

Capacity Allocation

Sets the amount of memory card space that may be used by locked files. You cannot decrease the minimum limit below 30%!

G-Sensor

1. Sets the sensitivity of the impact sensor for locking files.
2. Set to “close” to turn off file locking. But please remind that it will cause the image flip function inactivated.

Frequency

1. This option should be set according to the power supply specification used in your country or geographical region . for example, US users should select 60HZ value.
2. Two value for option: 50HZ/60HZ

Firmware Update Instructions

1. Download the firmware. You will find 2 files: file names cardvr_img.bin and default_cfg.bin.
2. Format the SD card in FAT32 format (If 32GB card you use, please format as FAT32 by Windows computer; if 64GB card, please use this Gui Format tool to format as FAT32 by Windows computer).
3. Copy the file cardvr_img.bin and default_cfg.bin files over to the root directory of the SD card and put the card into the camera.
4. Power on the camera and the firmware should automatically move onto the camera, leave for 30 seconds to 1 minute to ensure the firmware has updated the camera.
5. Take out the SD card and reformat it as FAT32.
6. Place the SD card back into the camera.
7. Check the firmware version using the app on your smartphone.
8. If you installed the Default WiFi On firmware, the GREEN LED light should be flashing. If you installed the Default WiFi Off firmware. the RED LED light should be flashing.
9. You can switch between WiFi on and off by pressing and holding the button at the end of the camera for 3-5 seconds.

FAQ

1. WiFi connection error with dashcam.

This happens if you plug into laptop USB socket for power source, so plug straight into cigarette lighter socket , not other laptop USB socket power source. Also it happens if memory card Not compatible with camera, so just remove its memory card from camera unit, and format memory card as FAT32 by windows computer, and try again.

2. Why this camera wouldn’t stay connected to my phone Pixel 2?

• For some Android phone models (like Google Pixel 2 and SAMSUNG), if the mobile data and Wi-Fi are enabled at the same time, the phone will switch to mobile data mode automatically since the B1W Wi-Fi SSID cannot access to internet. This will break the Wi-Fi connection between the camera and the smart phone.
• For example, SAMSU NG users: go to Settings — WLAN —Advanced, switch off the “Automatic Data Switch” option, or simply switch off the mobile data usage.
• If a proxy setting is applied to the Wi-Fi setting, the connection may also fail. Tap the SSID of the camera and go to Advanced — Proxy Settings, select “none” and save the Wi-Fi connection. Switch off then switch on the Wi-Fi option to try again.
• Quit the app (also kill the background process of the app) and reopen the app.

3. It has no sound when playback through APP
You only hear its sound when you download its video clip to your cellphone or playback on laptop.

4. The DVR can not make recording
Please use a high speed class Micro SD card (Class 6 or above) for camera Also, forrnat memory card in the app when you get card error.

5. The DVR can not loop recording
Please check if micro SD card has enough free space, and manually format memory card by APP or computer if necessary. Do not use Sandisk Ultra Micro SD cards.

6. File Error occurs when replay photos or videos
This happens due to bad quality Micro SD card or the space corruption of Micro SD card, please format the Micro SD card or replace the card.

7. The video file is not clear
Please check if the lens is clean, clean the lens with soft cloth; Also your car windshield to be perfect clean inside and outside.

8. There are cross strips in the video when recording
Switch the frequency to “SOHZ or 60Hz’ according to standard local Flicker Frequency.

Customer Contact information

www.annlov.net
FB®annlov
[email protected]

Downloads

Annlov AC 01 Dash Camera User Manual – [Optimized ]

Annlov AC 01 Dash Camera User Manual – [Original PDF ]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>