XINDA 6000 Protective Clean Power Toothbrush User Manual

XINDA 6000 Protective Clean Power Toothbrush

Introduction

With the XINDA 6000 Protective Clean Power Toothbrush, you can get a dentist- quality cleaning directly in your house. With its sophisticated sonic technology, this toothbrush cleans braces, fillings, crowns, and veneers gently yet effectively, improving gum health and preventing cavities. It’s a straightforward, pleasurable commitment to improved oral health supported by professional dental guidance.

Parts Description

• Toothbrush Handle : The main body of the toothbrush where the internal components like the battery and motor are housed.
• Power Button : Used to turn the toothbrush on and off and to cycle through the different brushing modes.
• Mode Indicators : Labels on the toothbrush handle indicating the various brushing modes: Clean, Sensitive, White, and Polish.
• Charging Stand : A base where the toothbrush handle stands while charging through a USB interface.
• Charging Indicator : A light or symbol indicates the charging status or battery level.
• Mode Selection Area : Close-up showing the specific modes with corresponding LED indicators that likely illuminate to show which mode is selected.
  • Clean Mode: Standard mode for daily cleaning.
  • Sensitive Mode: Lower intensity for sensitive teeth and gums.
  • White Mode: Higher intensity for whitening teeth.
  • Polish Mode: Intense mode for polishing and brightening teeth.
  • Power: Possibly the indicator for the toothbrush’s battery level or charging status.
• 3D Brush Head : Indicates the brush head’s ability to conform to the contours of the teeth and gums for effective cleaning.
  • Wavy Bristle Design : The bristles have a wavy pattern to enhance cleaning efficiency by fitting better against the teeth.
  • Soft Bristles : Ensures gentle cleaning to protect the gums while effectively removing plaque.
  • High-Density Bristle Configuration : This implies a greater number of bristles packed tightly to provide thorough cleaning.

Internal Motor and Vibration Mechanism

• Magnetic Levitation Motor : The core technology that powers the toothbrush, capable of delivering 39,000 vibrations per minute for deep cleaning.
• Drive Shaft : Transmits the motor’s kinetic energy directly to the bristles, ensuring efficient brushing motion.
• Frequency Vibration : Refers to the high vibration rate that enables the toothbrush to deliver a superior cleaning performance.

Product Specifications

• Brand : XINDA
• Suitable for : Adults
• Special Feature : Brushing Timer
• Power Source : Corded Electric via USB
• Vibration Frequency : 40,000 vibrations per minute
• Brushing Modes : Clean, Whiten, Polish, Sensitive
• Waterproof Rating : IPX7
• Battery Life : 30 days usage from a 4-hour charge
• Item Firmness : Soft
• Color : White

Box Contents

• 1 XINDA Electric Toothbrush Handle
• 2 Replacement Brush Heads
• 1 USB Charging Base

Product Features

• Sonic Technology: The toothbrush uses 40,000 vibrations per minute of sonic wave technology to effectively push cleaning agents deep between teeth and along the gum line for a thorough clean.
• Four Brushing Modes: With four modes—Clean, Whiten, Polish, and Sensitive—designed to meet different oral hygiene requirements, everyone may customize their brushing experience, from those with sensitive teeth to those looking for a more thorough clean.
• DuPont Bristles: The replacement heads’ soft DuPont nylon bristles are shaped like a “W” to fit the contours of your teeth and gums and provide a deep clean, even in difficult-to-reach places.

• Smart Timer: Featuring a 30-second interval reminder to switch quadrants and a built-in 2-minute timer to assist in ensuring even brushing coverage across all parts of the mouth, this timer helps enforce the dentist-recommended brushing regimen.
• Long Battery Life : The brush’s long-lasting battery, which may last 30 days on a single 4-hour charge, makes it ideal for travelers and people with hectic schedules.

• USB Fast Charging : The USB interface offers versatility and user-friendliness by facilitating rapid and simple charging from any USB port.
• IPX7 Waterproof: The toothbrush’s water-resistant construction allows it to be cleaned and maintained easily, even in the shower and when submerged in water.

• Simple Design: The toothbrush has an auto-off function that turns it off after a full charge to save energy and safeguard the battery, as well as a low battery light that alerts you when it’s time to recharge.
• Useful Storage: A magnetic absorption wall mount provides a space-saving, hygienic way to store the brush head while keeping it clean and ready for use.
• Mild on Dental Work: The toothbrush is adaptable and mild enough to handle a variety of dental diseases and work, and it is safe to use with veneers, crowns, fillings, and braces.

Product Usage Instructions

• Charging the Brush
  • Connect the USB charging base to a power source and place the toothbrush on the base.
  • A full charge takes 4 hours and provides up to 30 days of battery life.
  • The low battery indicator will alert you when it’s time to recharge, and the brush automatically shuts off when fully charged to prevent overcharging.

• Brush Head Selection : Attach one of the provided soft-bristle brush heads to the handle.

• Brushing Modes

  • Clean Mode : Standard mode for effective plaque removal.
  • Sensitive Mode : A gentler mode for users new to electric toothbrushes or those with sensitive teeth and gums.
  • Whiten Mode : Helps remove surface stains for whiter teeth.
  • Polish Mode : Polishes teeth for a shiny finish.

• Brushing : Apply toothpaste, place the toothbrush at a 45-degree angle to your gums, and gently move it in a brushing motion. The smart timer will guide your brushing session.

• Rinsing : After brushing, rinse your mouth and the toothbrush head with water. Store the toothbrush upright to air dry.

Safety Precautions

• When the toothbrush is charging, do not use it.
• Never try changing the battery on your own.
• When not in use, keep the toothbrush out of the children’s reach.

Troubleshoot

• Toothbrush Won’t Turn On or Charge:
• • Ensure the toothbrush is properly seated on the charging stand.
  • Check the power source and the USB cable for any signs of damage or loose connections.
  • Verify that the charging stand and electrical outlet are functioning correctly.
  • If there’s a charging indicator light, confirm whether it lights up when the toothbrush is placed on the stand.
• Reduced Efficiency or Power:
• • Make sure the toothbrush is fully charged.
  • Confirm that the brush head is correctly attached and not worn out. Replace the brush head if it’s beyond three months of use or showing signs of wear.
  • Clean any residue or buildup from the brush head and the area where it connects to the handle.
• Toothbrush Turns Off During Use:
• • If the toothbrush turns off unexpectedly, it may be due to a depleted battery. Recharge the toothbrush fully.
  • Check if there’s a pattern to the shut-off that could indicate the activation of a timer or a certain mode.
  • Inspect for any damage that might cause a loss of power.
• Toothbrush Modes Not Working Properly:
• • Cycle through all the modes to ensure that the mode button is responsive.
  • If a specific mode isn’t working, the issue could be with the electronics. Consult the user manual for a possible factory reset procedure.
  • If the problem persists, contact customer service as the toothbrush might need professional servicing.
• Excessive Noise or Vibration:
• • A loose brush head or handle components can cause unusual noise. Make sure everything is tightly assembled.
  • If the noise level has increased over time, the motor might be obstructed or in need of maintenance.
• Water Leakage or Toothbrush Head Becomes Loose:
• • Check the seals around the brush head and handle for wear and tear, which could compromise the waterproofing.
  • Ensure the brush head is snapped in firmly and hasn’t been damaged.
• The toothbrush Does Not Stop After 2 Minutes:
• • If the smart timer is not functioning correctly, causing the toothbrush not to stop as expected, try resetting the toothbrush.
  • Refer to the manual for instructions on how to reset the timer function.
• LED Indicator or Charging Light Issues:
• • If the LED indicator is not lighting up as expected, it could be an issue with the toothbrush’s electronics or battery.
  • Confirm whether the toothbrush is actually charging by checking the battery status after leaving it on the charging stand for some time.
• Unresponsive Buttons:
• • If buttons are unresponsive, make sure there is no residue or buildup blocking them.
  • A reset or a clean with a soft, damp cloth might help.

Frequently Asked Questions

How do I ensure my XINDA 6000 toothbrush is charging since it doesn't have a charging light indicator?

Ensure the toothbrush is properly placed on the charging base and connected to a power source. If there is no indicator light, refer to the user manual for typical signs of charging, or check the toothbrush after the recommended charging duration to see if it powers on.

Can the XINDA 6000 toothbrush heads be interchanged with other brands?

Toothbrush heads are usually designed to fit specific models. It is recommended to use XINDA replacement heads for the XINDA 6000 toothbrush to ensure compatibility and effectiveness.

Is the XINDA 6000 toothbrush suitable for people with receding gums or gum disease?

Yes, the toothbrush offers a Sensitive mode that's gentle on the gums. However, it's always best to consult with your dentist before using an electric toothbrush if you have specific dental conditions.

How long does the battery last on a single charge and how will I know it's time to recharge?

The XINDA 6000 should last 30 days on a single charge. It may feature a low battery indicator or you may notice a decline in power, which signals it's time to recharge.

What is the best way to clean the XINDA 6000 toothbrush handle?

Wipe the handle with a damp cloth. Avoid submerging it in water or using abrasive cleaners that can damage the electronic components.

How often do I need to replace my XINDA 6000 toothbrush head?

Typically, it's recommended to replace the toothbrush head every three months or sooner if bristles are frayed.

What type of movements does the XINDA 6000 toothbrush use?

The XINDA 6000 toothbrush uses sonic technology, producing high-frequency vibrations for effective plaque removal and deep cleaning.

How do I switch between the different modes on the XINDA 6000 toothbrush?

To switch modes, press the power button to cycle through the available options (Clean, Sensitive, White, Polish) until you reach your desired setting.

How does the XINDA 6000 toothbrush's 30-second interval reminder work?

The toothbrush pauses briefly every 30 seconds to remind you to move to a different quadrant of your mouth, ensuring a thorough brushing routine.

Can the XINDA 6000 toothbrush remove coffee or wine stains?

The White mode on the toothbrush is designed to help remove surface stains from teeth, which may include those caused by coffee or wine.

What is the function of the 'Polish' mode on the XINDA 6000 toothbrush?

The Polish mode uses inverted frequencies to brighten and polish the teeth for a smoother finish.

How should I store the XINDA 6000 toothbrush when traveling?

Ideally, use a protective case to store the toothbrush during travel to prevent damage and maintain hygiene.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>