KEONJINN HMM580445 Hollywood Vanity Mirror Installation Guide
- June 15, 2024
- KEONJINN
Table of Contents
KEONJINN HMM580445 Hollywood Vanity Mirror Installation Guide
Installation Instruction
Function description
- Color Temperature Selection Button: press this select the color temperature of the bulb;
- On/OFF Button press the button and the brightness of the bulb will gradually change during the switching process:
- Brightness Adjustment Button: long press to adjust the bright ness of the bulb.
- Color Temperature Selection Button
- O/OFF Button
Brightness Adjustment Button
Key features
| Product Mode | HMM580445 | HMM580445 + bluetooth | HMM800600 |
|---|---|---|---|
| Material | Glass + Aluminium alloy | ||
| Input Voltage | DC 12V (USB: 5V 1.5A~7.5W) | ||
| Power | 24W | 36W | 36W |
| Color Temperature | 3000K-5800K | 3000K-5800K | 3000K-5800K |
| LED Bulbs | 15 | 15 | 10 |
| Product Size | 58x12x44.5cm | 58x12x44.5cm | 80x12x60cm |
| Mirror Sise | 58×2.5×42.5cm | 58×2.5×42.5cm | 80×2,5x58cm |
| Base Size | 58x12x2cm | 58x12x2cm | 80x12x2cm |
Install vanity mirror
-
Take out the 4 screws at the bottom;
-
Install the base plate with the 4 screws;
-
Install the bulb into the siot on the mirror. Also take care to align the recesses(A) of the bulbs and the bulge(B) of the bulb holder.
-
After installing all the bulbs, then connect the adapter and turn on the power.
NOTE:
- Please install all the bulbs before powering on.
- Please be careful not to touch the bulb holder directly with your hands after power is applied to prevent possible electric shock..
- How to remove the bulb: Turn off the power, hold the bottom of the bulb tightly and pull it out.
INSTALLATION TOOLS
-
Level
-
Pencil
-
Hammer
-
Safety Goggles
-
Electric Drill
-
Phillips Screwdriver
-
Tape Measure
Wall-mounted vanity mirror
If you want to hang the mirror on the wall, when you remove the base, you have to put the screws back on.
- Measure the distance of two hooks centre and use the level ruler to draw a horizontal line on the wall and then mark the location of the center of hooks;
- Use a electric drill to punch two 6mm holes at the marked spots, and then apply wall anchors with hammer; 3. Use the screwdriver to lightening the screw on the wall anchors, set aside 7mm distance to wall.
- Mount the mirror on the wall an ensure it is sturdy
If you have any problem, please feel free to contact us on [email protected]
Read User Manual Online (PDF format)
Loading......