TELTONIKA RUT301 Industrial Ethernet Router User Guide
- May 15, 2024
- teltonika
Table of Contents
TELTONIKA RUT301 Industrial Ethernet Router
HARDWARE
-
FRONT VIEW
-
BACK VIEW
-
POWER SOCKET PINOUT
I/O (PIN 3 and 4): Configurable digital Input/Output pins. Open collector output, max output 30 V, 300 mA or Digital input where 0-6 V detected as logic low and 8-30 V – logic high
FEATURES
ETHERNET
WAN| 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az
standards, supports auto MDI/MDIX
LAN| 4 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u,
802.3az standards, supports auto MDI/MDIX crossover
NETWORK
Routing| Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP,
NHRP), Policy based routing
Network protocols| TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP,
FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP,
SNMP, MQTT, Wake On Lan (WOL)
VoIP passthrough support| H.323 and SIP-alg protocol NAT helpers, allowing
proper routing of VoIP packets
Connection monitoring| Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP
for link inspection
Firewall| Port forward, traffic rules, custom rules
Firewall status page| View all your Firewall statistics, rules, and rule
counters
Ports management| View device ports, enable and disable each of them, turn
auto-configuration on or off, change their transmission speed, and so on
Network topology| Visual representation of your network, showing which devices
are connected to which other devices
DHCP| Static and dynamic IP allocation, DHCP Relay
QoS I Smart Queue Management (SQM)| Traffic priority queuing by
source/destination, service, protocol or port, WMM, 802.11e
DDNS| Supported >25 service providers, others can be configured manually
Network backup| VRRP, Wired options, each of which can be used as an automatic
Failover
Load balancing| Balance, Internet traffic over multiple WAN connections
Hotspot| Captive portal (Hotspot), internal/external Radius server, SMS
authorization, internal/external landing page, walled garden, user scripts,
URL parameters, user groups, individual user or group limitations, user
management, 9 default customizable themes and option to upload and download
customised hotspot themes.
SSHFS| Possibility to mount remote file system via SSH protocol
SECURITY
Authentication| Pre-shared key, digital certificates, X.509 certificates,
TACACS+, Radius, IP & Login attempts block
Firewall| Pre-configured firewall rules can be enabled via WebUI, unlimited
firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention| DDOS prevention (SYN flood protection, SSH attack
prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-
RST,X-mas, NULL flags, FIN scan attacks)
VLAN| Port and tag-based VLAN separation
WEB filter| Blacklist for blocking out unwanted websites, Whitelist for
specifying allowed sites only
Access control| Flexible access control of SSH, Web interface, CLI and Telnet
V PN
OpenVPN| Multiple clients and a server can run simultaneously, 27 encryption
methods
OpenVPN Encryption| DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC
192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CASTS-CBC 128, RC2-64-CBC 64,
AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128,
AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192,
AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192,
AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256,
AES-256-OFB 256, AES-256-CBC 256
IPsec| IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128,
AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12,
AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
GRE| GRE t u n ne l, GRE tunnel over IPsec support
PPTP, L2TP| Client/Server instances can run simultaneously, L2TPv3, L2TP over
IPsec support
Stunnel| Proxy designed to add TLS encryption functionality to existing
clients and servers without any changes in the program’s code
DMVPN| Method of building scalable IPsec VPNs
SSTP| SSTP client instance support
ZeroTier| ZeroTier VPN client support
WireGuard| WireGuard VPN client and server support
Tinc| Tine offers encryption, authentication and compression in it’s tunnels.
Client and server support.
OPC UA
Supported modes| Client, Server
Supported connection types| TCP
MODBUS
Supported modes| Server, Client
Supported connection types| TCP, USB
Custom registers| MODBUS TCP custom register block requests, which read/write
to a file inside the router, and can be used to extend MODBUS TCP Slave
functionality
Supported data formats| 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB
first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian),
CDAB, BADC), HEX, ASCII
DATA TO SERVER
Protocol| HTTP(S), MQTT, Azure MQTT
Data to server| Extract parameters from multiple sources and different
protocols, and send them all to a single server
MODBUS MQTT GATEWAY
Modbus MQTT Gateway| Allows sending commands and receiving data from MODBUS
Master through MQTT broker
DNP3
Supported modes| Station, Outstation
Supported connection| TCP, USB
DLMS
DLMS Support| DLMS – standard protocol for utility meter data exchange
Supported connection types| TCP, USB
MONITORING & MANAGEMENT
WEBUI| HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event
log, system log, kernel log
FOTA| Firmware update from server, automatic notification
SSH| SSH (v1, v2)
TR-069| OpenACS, EasyCwmp, ACS Lite, tGem, LibreACS, GenieACS, FreeACS,
LibCWMP, Friendly tech, AVSystem
MQTT| MQTT Broker, MQTT publisher
SNMP| SNMP (v1, v2, v3), SNMP Trap
JSON-RPC| Management API over HTTP/HTTPS
RMS| Teltonika Remote Management System (RMS)
IOT PLATFORMS
Cloud of Things| Allows monitoring of: Device data, Mobile data, Network info,
Availability
Cumulocity| Allows m on it or ing of: Device Model, Revision and Serial
Number, WAN Type and IP
Azure IoT Hub| Allows monitoring of: Wan IP, Number of bytes send/received,
Model, Manufacturer, Serial, Revision, FW version and collected data of
industrial devices
SYSTEM CHARACTERISTICS
CPU| Mediatek, 580 MHz, MIPS 24KEc
RAM| 1 28 MB, DDR2
FLASH storage| 16 MB serial NOR flash
FIRMWARE/ CONFIGURATION
WEB UI| Update FW from file, check FW on server, configuration profiles,
configuration backup
FOTA| Update FW
RMS| Update FW/configuration for multiple devices at once
Keep settings| Update FW without losing current configuration
FIRMWARE CUSTOMISATION
Operating system| RutOS (OpenWrt based Linux 05)
Supported languages| Busybox shell, Lua, C, C++
Development tools| SDK package with build environment provided
GPL customization| You can create your own custom, branded firmware and web
page application by changing colours, logos, and other elements in our
firmware to fit your or your clients’ needs
USB
Data rate| USS 2.0
Applications| Samba share, USS-to-serial
External devices| Possibility to connect external HDD, flash drive, additional
modem, printer, USS-serial adapter
Storage formats| FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4
INPUT/ OUTPUT
Input| 2 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as
logic high
Output| 2 x Digital Output, Open collector output, max output 40 V, 400 mA
Events| Email, RMS
1/0 juggler| Allows to set certain 1/0 conditions to initiate event
POWER
Connector| 4-pin industrial DC power socket
Input voltage range| 9 – 30 VDC, reverse polarity protection, voltage
surge/transient protection
PoE (passive)| Passive PoE can be installed upon request
Power consumption| Idle: < 0.8 W, Max: < 3.8 W
PHYSICAL INTERFACES
Ethernet| 5 x RJ45 ports, 10/100 Mbps
I/O’s| 2 x Digital Input, 2 x Digital Output on 4-pin power connector
Status LEDs| 1 x WAN type LED, 4 x LAN status LEDs, 1 x Power LED
Power| 1 x 4-pin power connector
USB| 1 x USB A port for external devices
Reset| Reboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
Casing material| Aluminium housing
Dimensions (W x H x D)| 100 x 30 x 85 mm
Weight| 233 g
Mounting options| DIN rail, flat surface placement
OPERATING ENVIRONMENT
Operating temperature| -40 °c to 75 °c
Operating humidity| 10% to 90% non-condensing
Ingress Protection Rating| IP30
REGULATORY & **TYPE APPROVALS**
Regulatory| CE, UKCA, RCM, FCC, IC, CB, EAC, UCRF, WEEE
STANDARD PACKAGE*
- Router RUT301
- 9 W PSU
- Ethernet cable (1.5 m)
- QSG (Quick Start Guide)
- Packaging box
ROUTER RUT301
| 9 W PS| ETHERNET CABLE (1.5 M)|
QSG
---|---|---|---
| 
| 
| 
- Standard package contents may differ based on standard order codes.
CLASSIFICATION CODES
HS Code: 851762
HTS: 8517.62.00
For more information on all available packaging options – please contact us directly.
AVAILABLE VERSIONS
HARDWARE VERSION| SUPPORTED FREQUENCIES| STANDARD ORDER CODE /
PACKAGE CONTAINS
---|---|---
RUT301 **| N/A| RUT301000000 / Standard package with EU PSU
RUT300 SPATIAL MEASUREMENTS
MAIN MEASUREMENTS
W x H x D dimensions for RUT301:
Device housing*:| 100 x 30 x 93.2 mm
Box:| 173 x 71 x 148 mm
*Housing measurements are presented without antenna connectors and screws; for measurements of other device elements look to the sections below.
TOP VIEW
The figure below depicts the measurements of RUT301 and its components as seen from the top:
RIGHT VIEW
The figure below depicts the measurements of RUT301 and its components as seen from the right side:
FRONT VIEW
The figure below depicts the measurements of RUT301 and its components as seen from the front panel side:
REAR VIEW
The figure below depicts the measurements of RUT301 and its components as seen from the back panel side:
MOUNTING SPACE REQUIREMENTS
The figure below depicts an approximation of the device’s dimensions when cables and antennas are attached:
DIN RAIL
The scheme below depicts protrusion measurements of an attached DIN Rail:
Customer Support
Copyright © 2024, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. 2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>