VOLT POLSKA VP-500 Voltage Converter User Manual
- June 4, 2024
- VOLT POLSKA
Table of Contents
VOLT POLSKA VP-500 Voltage Converter
Caution
Avoid overloading
Do not use the converter beyond its maximum power. When connected to any
appliance with a built-in motor compressor, the starting power is generally
several times of the appliance’s listed power rating. Make sure that the total
starting pow.er capacity of all connected appliances does not exceed the
listed maximum output power of the converter.For color TV, calculate it twice
as its listed capacity. Make sure that the converter is of the same output
voltage and frequency as the appliances to’ it is connected. Make sure that
the voltage of electrical source is the same as the input voltage of the
converter.
Always place the converter in an environment that is:
- Well ventilated.
- Not exposed to direct sunlight or heat sources.
- Out of reach of children.
- Away from water moisture Oil or grease.
- Away from any flammable substance.
If the power cord is damaged, it must be replaced by authorized dealers or similarly qualified persons in order to avoid a hazard.
When the Circuit breaker opens the circuit
When products are connected to the converter and when power is “ON., during
that time if the circuit breaker opens the circuit that means the converter is
overloaded with too many appliances. Connecting too many appliances to the
transformer draws too much power that causes the circuit breaker to open the
circuit. If that happens, switch the converter “OFF”, unplug it from the wall
outlet then decrease the loading by unplugging the appliances from the
converter. Unplug the converter from the wall. Press the button on the circuit
breaker. Wait a few minutes then switch the power “ON” position. Then switch
“ON” appliances one by one ensuring that their combined rated power does not
exceed the rating power of the converter.
Remarks:
This model is a single phase. The waveform is sinuous and without distortion.
Instructions
Instruction to the converter
Familiarize yourself with the various features and facilities by studying the
two diagrams below to obtain maximum benefit from the converter.
Front of the converter
Rear of the converter
Connect the electrical appliances to the converter
Check the wattage requirement of your equipment from the name plate and specs
to determine the correct wattage and which converter to be used. If your
appliance’s voltage rating is 110V, your main voltage must be 220V. If your
appliance’s Voltage rating is 220V, your main voltage rating must be 110V.
Make sure all appliances are turned “OFF”. Make connections as shown in the diagram below ensuring that the total starting power needed does not exceed the rated maximum output power of the converter. Select the correct input voltage according to your area mains.
Connect the converter to the electrical mains
Plug the AC mains cord to the wall mains socket as shown in the diagram below
and switch “ON”.
Switch on the converter
Switch the power “ON” . AC Input Main Socket Press the power “ON/OFF” switch
to the “ON” position and the LED will illuminate. Switch “ON” the appliances
one by one.
TECHNICAL DATA
MODEL | VP500 | VP1000 | VP2000 | VP3000 | VP5000 |
---|---|---|---|---|---|
Input voltage | 230 VAC lub 110 VAC | ||||
Output voltage | 230 VAC lub 110 VAC | ||||
Power | 500VA | 1000VA | 2000VA | 3000VA | 5000VA |
SOFT- START | No | Yes | |||
Dimensions (mm) | 160x125x 90 | 192x148x130 | 218x168x138 | 285x190x201 |
285x190x201
Weight (kg)| 2,9| 4,4| 6,9| 10,2| 12,9
Models
WARRANTY CARD
DATE OF PURCHASE|
---|---
SHIPPING ADDRESS|
SIGNATURE / STAMP|
DAMAGE DESCRIPTION
|
SERVICE COMMENTS|
FILL IN IF NEEDED
Cross incorrect
I agree to pay the cost of inverter repair due to: the expiration of the
warranty period / * warranty void Before proceeding with the repair, the
service will inform you by phone about the exact costs of the repair. Please
attach a copy of the purchase document (receipt or invoice) to the complaint.
The full regulations of service repairs can be found on our website.