SLV 1007288 Wall and Ceiling Light Instruction Manual
- June 17, 2024
- SLV
Table of Contents
SLV 1007288 Wall and Ceiling Light
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
The light source is only exchangeable by a professional. The separate control
unit is only exchangeable by a professional.
Technical Details are subject to change.
Operating Manual PART B
Wall- and Ceiling Light
- 1007288 …89 …90 …91 1007296 …97 …98 …99
- 100304 …05 …06 …07 1007312 …13 …14 …15
- Read the manual carefully and keep it for further use!
- Safety advice for installation and operation.
- Disregarding may lead to danger of life, burning or fire!
- Any work on the electrical connection only by the electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children are not harmed by the product.
- Do not stare into the active light source.
- Additional safety advice =
Use as directed
- Safety class I (1) – Connection with protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Operate only in dry indoor areas.
- Do not strain mechanically or expose to strong dirt contamination.
- IP50: Protection against disturbing dust deposition – No protection against water.
- 1007288 …89 …90 …91 1007296 …97 …98 …99
- Admissible ambient temperature(ta): -20°C …+30°C
- 1007304 …05 …06 …07 1007312 …13 …14 …15
- Admissible ambient temperature(ta):: -20°C …+40°C
Light Source
The light source of this luminaire may only be replaced by the manufacturer,
an authorized service technician or a comparable qualified person. This
product contains a light source of the energy efficiency class C.
Reference control setting: 4000K
Care / Storage
Disconnect the product from the mains and let it cool down. Clean external surfaces regularly with a slightly moistened (water) cloth. Store dry and clean.
Installation
- Switch off mains / fixed connection cable!
- Use only described accessories.
- Use only suitable fastening materials.
- 1007288 …89 …90 …91 1007296 …97 …98 …99 1007304 …05 …06 …07
- Only suited for wall and ceiling surface mounting.
- 1007312 …13 …14 …15
- Only suited for ceiling surface mounting.
- Install according to the declared IP type.
- Install as shown in the figure.
- Suitable Dimmer: Trailing-edge phase dimmer (Code C).
- Note the manufacturer’s instructions.
Electrical connection
- Equip flexible wire ends with suitable wire ferrules!
- Live conductor Terminal L
- Neutral conductor Terminal N
- Protective conductor Earth terminal
- Check secure fixation and proper function!
0001 12.04.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>