Taymor 9700 Series Safety Rated Vertical Rod Exit Device Instruction Manual

Taymor 9700 Series Safety Rated Vertical Rod Exit Device

INSTALLATION INSTRUCTIONS

9700V SERIES SAFETY-RATED SURFACE VERTICAL ROD EXIT DEVICE

• MAIN CHASSIS & TOP AND BOTTOM LATCHES MOUNTING SCREWS
• For steel-prepared doors, drill/tap and use supplied machine screws.
• For thin gauge metal, non-prepared doors, or labeled wood doors use thru bolts.
• See the template for details on mounting screws.
• LHR door shown
  • (RHR door opposite)
• Install the rod guide at the central position of the rod with 2 screws as shown
• A – Top strike
• B – Top latch
• C – Head assembly
• D – Bottom latch
• E – Bottom strike
• F – End plate
• G – Push bar
• H – Dogging access

Dogging:

• Depress and hold the push bar, insert the dogging wrench, and turn 90°.
• The push bar will remain depressed and the latch will remain retracted.

DOOR HANDING GUIDE:

Head assembly and end plate install

• Step 1: Install the head assembly to the door with 4 screws as shown
• Step 2: Install the end plate to the door with 2 screws as shown

Top latch install

Step 1:

• Attach the top latch mounting plate on the door with screws.

Step 2:

• Attach the top latch to the top latch mounting plate.
• Attach the top latch on the door with screws.

Step 3:

• Insert the latch pin through the latch bolt.

Top strike install

• Install the top strike to the frame with 3 screws as shown.

Bottom latch install

Step 1:

• Attach the bottom latch set to the fixing set.

Step 2:

• Install the bottom latch set to the door with 2 screws as shown.

Bottom strike install

Step 1:

• Drill 25/32″ (20 mm). depth 25/32″ (20 mm) on floor.

Step 2:

• Install the bottom strike into the floor as shown.

Rod install

• Step 1: Attach the top rod (long rod) to the top latch.
• Step 2: Attach the top rod to the tube adapter on the head assembly.
• Step 3: The bottom rod should be engaged with the bottom latch sleeve.
• Step 4: Attach the bottom rod (long rod) to the tube adapter on the head assembly.
• Meets California Building Code (2013) Sec. 11B-309.4. “Operable parts shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist.
• The force required to activate operable parts shall be 5 pounds (22.2N) maximum”.

CUSTOMER SERVICE

• WEST 1-800-267-4774
• EAST 1-800-387-7064
• taymor.com
• ® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.

Documents / Resources

| Taymor 9700 Series Safety Rated Vertical Rod Exit Device [pdf] Instruction Manual
9700 Series Safety Rated Vertical Rod Exit Device, 9700 Series, Safety Rated Vertical Rod Exit Device, Rated Vertical Rod Exit Device, Vertical Rod Exit Device, Rod Exit Device, Exit Device
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>