Taymor U26-P000AE14 Premier Interconnected Lock Instruction Manual
- June 14, 2024
- taymor
Table of Contents
Taymor U26-P000AE14 Premier Interconnected Lock
Product Information
- Product Name: U26-P000AE14
- Brand: Taymor
- Optional Components: Facultatif, Opcional
- Lever Screws: 2
- Mounting Screws: 8
- Interconnect Plate Screws: 2
- Dimensions:
- Width: 2-1/8″ (54mm)
- Backset Options:
- 1-3/4″ (45mm)
- 2-3/16″ (55mm)
- 2-3/8″ (60mm)
- 2-3/4″ (70mm)
Product Usage Instructions
- Prepare the door frame by using the lock as a template. Drill holes for the lock and latch, and chisel a notch until the latch fits perfectly.
- Ensure that the bevel of the lock faces the door jamb.
- Drill a 1″ (25mm) diameter hole at the center of the door edge.
- Fold the provided item and place it on the door edge.
- Choose the desired backset option for installation.
- Drill a 1″ (25mm) diameter hole at the center of the door edge.
Note: Please refer to the product manual for further instructions and illustrations.
FOR TAYMOR® PREMIER INTERCONNECTED LOCK
Safety Information Informations
Read the precautions and instructions in this manual before installing and using this lock. Save this manual for future reference.
WARNING:
If the door needs to be drilled, be familiar with how to use your drill
safely, and understand all the door preparation steps before proceeding.
CAUTION:
Before beginning the installation, please read and understand the entire
manual.
NOTE:
To ensure a long lasting finish, remove the locks, or do not install the locks,
prior to painting your door. Periodically clean the locks with mild soap and a
soft cloth. Do not use abrasives or harsh chemicals, and avoid sharp or
scratching objects.
Pre-Installation —Tools Required/Hardware Included
| Part | Description | Quantity |
|---|---|---|
| AA | Deadbolt Screws ( Door Thickness 45~55mm ) | 2 |
| BB | Lever Screws | 2 |
| CC | Long wood screw | 2 |
| DD | Short wood screw | 8 |
| EE | Mounting Screws ( Door Thickness 45~55mm ) | 4 |
| FF | Interconnect Plate Screws | 1 |
| GG | Allen Wrench | 1 |
| HH | Set screw | 2 |
Note: Not to scale. Remarque:
| Part | Description | Quantity |
|---|---|---|
| A | Interior Lever | 1 |
| B | Interior Escutcheon | 1 |
| C | Interconnect Plate | 1 |
| D | Mounting Plate | 1 |
| E | Deadbolt | 1 |
| F | Interior reinforcing plate | 1 |
| G | Interior rose plate | 1 |
| H | Outside Cylinder | 1 |
| I | Exterior Rose | 1 |
| J | Exterior Lever | 1 |
| K | Key | 1 |
| L | Latch | 1 |
| M | Deadbolt Strike | 1 |
| N | Latch Strike | 1 |
Pre-Installation (continued) — Door Preparation
NOTE: If your door already has holes, skip to Installation.
-
USING THE TEMPLATE, MARK THE DOOR AND DRILL THE HOLES, AND CHISEL OUT A MORTISE.
NOTE: Drill from both sides to avoid wood splitting.
-
PREPARE THE DOOR JAMB – USING THE STRIKE PLATE AS A PATTERN, DRILL THE LATCH AND SCREW HOLES, AND CHISEL OUT A MORTISE UNTIL THE STRIKE PLATE FITS FLUSH
NOTE: Double check your product for the correct hole sizes.
Installation
INSTALLING THE LATCH
Set the latch backset
CAUTION: Be sure the latch cam is upright before making any backset
adjustment.
Install the latch
NOTE: The bevel should face the door jamb.
INSTALL EXTERIOR ASSEMBLY
INSTALL INTERIOR ASSEMBLY
REMOVING INTERIOR ASSEMBLY (IF REQUIRED)
SWITCHING THE HANDLES (IF REQUIRED)
NOTE: Levers installed in reverse will not affect the product’s
performance.
