Taymor 9700 Series Fire Rated Push Pad Exit Device Instruction Manual
- June 16, 2024
- taymor
Table of Contents
INSTALLATION INSTRUCTIONS
9700 SERIES SAFETY-RATED RIM EXIT DEVICE – TEMPLATE
9700 Series Fire Rated Push Pad Exit Device
- For steel prepared doors, drilV/tap and use supplied machine screws.
- For thin guage metal, non-prepared doors or for labeled wood doors use thru bolts.
- See template for details on mounting screws.
DOOR HANDING GUIDE:
A- Strike
B – Head assembly
C – End plate
D = Push bar
E – Dogging access
Dogging: Depress and hold push bar, insert dogging wrench and turn 90°.
The push bar will remain depressed and the latch will remain retracted.
- Device template
- Strike install
Install the strike to the frame with 2 screws as shown - Head assembly and end plate install
Step 1: Install the head assembly to the door with 4 screws as shown Step 2: Install the end plate to the door with 2 screws as shown
9700 SERIES SAFETY-RATED RIM EXIT DEVICE – TEMPLATE
IMPORTANT: Print template to scale if not factory supplied instructions.
CUSTOMER SERVICE
WEST 1+800-267-4774
EAST 1-800-387-7064 |
taymor.com
® REGISTERED TRADEMARK OF
TAYMOR INDUSTRIES LTO.
JUNE 2023
Documents / Resources
|
Taymor 9700 Series Fire Rated Push Pad Exit
Device
[pdf] Instruction Manual
9700 Series Fire Rated Push Pad Exit Device, 9700 Series, Fire Rated Push Pad
Exit Device, Rated Push Pad Exit Device, Push Pad Exit Device, Pad Exit
Device, Exit Device, Device
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>