Taymor F9700V Safety Rated Vertical Rod Exit Device Instruction Manual
- June 17, 2024
- taymor
Table of Contents
Taymor F9700V Safety Rated Vertical Rod Exit Device
INSTALLATION INSTRUCTIONS
F9700 SERIES FIRE-RATED SURFACE VERTICAL ROD EXIT DEVICE
Assembly
MAIN CHASSIS & TOP AND BOTTOM LATCHES MOUNTING SCREWS
- For steel prepared doors, drill/tap and use supplied machine screws.
- For thin gauge metal, non-prepared doors or for labeled wood doors use thru bolts.
- See template for details on mounting screws.
Installation
- DOOR HANDING GUIDE:
- Head assembly and end plate install
- Step 1: Install the head assembly to the door with 4 screws as shown
- Step 2: Install the end plate to the door with 2 screws as shown
- Top latch install
- Step 1: Attach the top latch mounting plate on the door with screws.
- Step 2:
- Attach the top latch to the top latch mounting plate.
- Attach the top latch on the door with screws.
- Step 3: Insert the latch pin through the latch bolt.
- Bottom latch install
- Step 1: Attach the bottom latch set to the fixing set.
- Step 2 : Install the bottom latch set to door with 2 screws as shown.
- Bottom strike install
- Step 1 : Drill ∅ 25/32* (20 mm), depth 25/32″ (20 mm) on floor.
- Step 2: Install the bottom strike into floor as shown.
- Rod install
- Step 1 : Attach the top rod (long rod) to the top latch.
- Step 3: The bottom rod should be engaged with the bottom latch sleeve.
- Step 2: Attach the top rod to the tube adapter on the head assembly.
- Step 4: Attach the bottom rod (long rod) to the tube adapter on the head assembly.
Meets California Building Code (2013) Sec. 11B-309.4. “Operable parts shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist. The force required to activate operable parts shall be 5 pounds (22.2N) maximum”.
CUSTOMER SERVICE
- WEST 1-800-267-4774 EAST 1-800-387-7064 | taymor.com
- ® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.
- May 2013
Read User Manual Online (PDF format)
Loading......