bonsaii C266-B Professional Document Shredder Instruction Manual
- June 17, 2024
- Bonsaii
Table of Contents
Paper Shredder C266-B
Instruction Manual
12-Sheet Cross Cut Shredder
C266-B Professional Document Shredder
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP IT FOR FUTURE REFERENCE.
Please give us a chance to make it right and do better!
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped.
Customer Service:
: customer-care@bonsaii.com
TIPS : Thanks for your believing and choosing!
In order to ensure the machine without any quality issues,We have inspected
the machines by 100%.Maybe we have remained some shred papers in the basket or
on blades during machine test. If it makes you feel uncomfortable or
inconvenience,Please kindly contact with our customer service.We will provide
further and better service for you. Thanks!
IMPORTANT!
- Please read all instructions carefully and retain instructions for future reference.
- Read through each step carefully and follow the proper order.
- Please place this machine on a flat and stable surface place, please be careful and don’t tip the machine over .
- In case the machine is broken and cannot be used as normal. 4. The device should be set up as close as possible to an easily accessible wall socket. 5. Dangerous, please do not disassemble, modify or repair the machine in any way on your own.
- To avoid electric shock, hurting or accidental injury. 6. When you empty the basket, or move the machine, or no need to use the machine for a certain period of time ,Please kindly make the machine under OFF status and unplug.
- To avoid fire accident or electric shock. 7. Please don’t use inflammable liquids, gases, water and cleaner to clean the machine.
- To avoid fire accident or electric shock.
8. Please don’t use the machine in a very high temperature, very humidity and very heavy dust environment .
*To avoid fire accident, electric shock or machine malfunction 9. Please do not put adhesive tape, carbon paper, fabric, plastic film, etc. into the machine for shredding. - To avoid damaging the machine 10. Please do not damage or process the power cables, or do not place heavy objects on the cables.
- To avoid fire accident or, hurting or electric shock 11. If abnormal conditions such as smoke or odor occurred, please disconnect the power and stop using it immediately.
- To avoid fire accident or electric shock 12. Please do not use if the shredder or the power cable is damaged or defective
- To avoid fire accident or electric shock 13. Do not shred greeting cards with sound chips or batteries.
- To avoid fire accident or electric shock. 14. Do not hold CD/DVD with finger through the center ring while feeding into the shredder. Serious injury may occur.
IMPORTANT SAFETY INTRODUCTIONS BEFORE FIRST USE
** User information / safety instructions.
WARNING**
Please kindly let children and pets keep away from the machine.
- There are sharp blades inside the machine so as to avoid injury.
Please kindly let your hands keep away from the sharp blades and feeding opening of paper shredder. - There are sharp blades inside the machine so as to avoid injury.
Please kindly let your hair keeps away from the feeding opening of paper shredder. - If your hair is accidentally sucked in, Please kindly use the “Reverse function” and get rid of the danger.
Please kindly let your clothing or some small items keep away from the feeding opening of paper shredder like tie, necklace, sleeves, jewelry, etc..
Please don’t use inflammable liquids, gases water and cleaner to clean the machine. - To avoid fire accident.
Please kindly don’t touch the sharp edges to avoid injury .
This equipment is not intended for use by children.Avoid touching the media feed opening with the hands,clothing or hair. Unplug this equipment when not in use for an extended period of time, Hazardous moving part is in this equipment, keep body parts away from moving parts.
It cannot be over 12 sheets in one time for the quantity of shredding.
One folded sheet of paper equates to 2 sheets of paper.
Heavier paper, humidity or other than rated voltage may reduce capacity.
85% Maximum sheets per pass to avoid jams.
KNOW YOUR SHREDDER
For safety reasons,
shredder will operate only if the shredder head is in correct position and
used with supplied basket.
- Control panel ((Control shredder’s four status “REV”, OFF”, FWD, “AUTO”)
- Reverse Position (“Release the paper”)
- Auto Position (Turn on )
- Forward (compulsorily work)
- OFF (Turn off)
- Power light (work status in blue )
- Indicator light (overloading in red with flashing, Overheating in red )
- Feed opening
- Basket handle
- Basket
- Transparent Window
- Shredder’s caster
TECHNICAL SPECIFICATIONS
| Voltage | 220-240VAC, 50Hz |
|---|---|
| Feeding Opening Capacity | 12 sheets/time(A4 80g/m²) |
one sheet of CD/time
one sheet of credit card/time| Feed Opening (LW)| 220 x 5mm
8.66 x 0.2 Inches
Basket type| Pull out| Shred Type| Cross Cut
Basket Capacity| 4.2Gallon/16L| Shred Paper Size| 0.2×0.47inches
(5x12mm)
Product Size (LW*H)| 13.13 x 9.53 x 18.03 Inches
333.5 x 242 x 458mm| Shred Functions| Paper, plastic credit card, staple,
clips, CD
Will not shred : large paper clips, Unopened junk mail, window or insulated
envelopes, continuous forms, newsprint,bound pages (for example: notepads,
checkbooks, magazines, etc…), transparencies, laminated documents, cardboard,
any items with adhesives, hard materials or plastic (except plastic Credit
Cards and CDs).
Maximum recommended daily usage rates: 60 sheets, 5 credit cards.
OPERATING INSTRUCTIONS
-
Plug in and move “control panel” from OFF to AUTO position, “Power Light” in blue.(Feed papers, staple, clip CD or credit card to shred). continuous operation around 60 minutes.
WARNING
Beware of injury caused by CD splashing or incorrect CD shredding. Please wear safety goggles and shred the CD in a correct way. -
When finished shredding or no need to use it, please set to OFF.
Jam: Move “control panel” from “Auto” to “REV” position, “Power Light” in
blue .( pull out the jammed paper) * Move “control panel” from “REV” to FWD
position for 3-5 seconds staying (repeat the operation around 2-3 times if get
a very serious jam) Overheat (power light is in blue and indicator light in
red, need to wait for cooling down).
Cool down around 20 minutes
Overload (power light is in blue , indicator light in red with flashing , need
to take out excess papers)
PRODUCT MAINTENANCE
Plug in and move “control panel” from OFF to AUTO position, “Power Light”
shows blue light. (Feed one shredder Lubricant pack to shred ) Move “control
panel” from Auto to “REV” position for 2-3 seconds staying (don’t pull out the
shredder lubricant pack.)
Move “control panel” from REV to AUTO to shred
the shredder lubricant pack for 3-5 seconds staying and repeat the operation
for 2-3 times till the shredder |ubricant pack is fully shredded. When
finished shredding or no need to use it , please set to OFF.
CAUTION
*Only use the professional shredder Lubricant pack to maintain the shredder
such as Bonsaii shredder Lubricant 24-Pack(LS24)/12-Pack(LS12) .(no cleaner
,inflammable liquids ,gases oil etc… )
TROUBLESHOOTING
| Malfunction | Reason | Solution |
|---|---|---|
| Stop Working | The power plug doesn’t connect to the power supply. | Please |
kindly check whether you use the machine with related supply voltage or Plug
in again correctly.
Power supply voltage is too low or no power supply.| Please kindly find a
related supply voltage to use it .
The machine is under overheating protection, because the machine is over the
continues working capacity.| Wait for the machine to cool down naturally.
The thickness of paper is too thin.| To make the paper thicker ,You can add
more papers or fold the paper.
The machine is overloading, because the paper is over machine Max shredding
quantities.| Reduce paper quantity with an acceptable amount and place the
paper into the feeding opening of shredder again.
Damage of power cable.| Please replace the power cable with the same
parameters by professional person or contact with our customer service.
The basket is full.| Empty the basket.
Defective of machine.| Please kindly contact with our customer service.
Jam| Paper jam.| Please kindly use the function of “Reverse” to take out the
excess paper.
Keep Running| Paper dust and other foreign objects cover the sensor. The
location of sensor is in the shredder’s feeding opening look like glass beads
or marbles.| 1.Please unplug first and use soft cloth or cotton swab to clean
the foreign objects without any cleaner or water .
2.If there are some paper scraps around the sensor area ,please kindly use
cotton swab or needle nosed pliers to take out the paper scraps .
CAUTION :please don’t overexert and useSharp tools to clean or poke the
sensorto avoid damaging the sensor.
Loud Noise| The shredder is placed on an unsuitable place.| Change the
location.
If the above answers can not solve your problems, please kindly contact with our customer service team via email customer-care@bonsaii.com
Disposal:
** Directive 2012/19/EU concerning the handing, collection, recycling and
disposal of electrical and electronic equipment and their components (‘waste
electrical and mmmm electronic equipment’, known as WEEE).
The crossed symbol on a rubbish container indicates that the machine or device
is not allowed to be disposed of but it must be handed over to a suitably
equipped collection centre for proper recycling or disposal.
Directives:
** This machine corresponds to the requirements according to EU Directive
2014/30/EU entitled ‘Electro-Magnetic Compatibility’ and 2014/35/EU entitled
‘Low-Voltage Directive.
**** The packaging materials have been selected for their environmental
friendliness and ease of disposal and are therefore recyclable. Dispose of
packaging materials that are no longer needed in accordance with applicable
local regulations.
LIMITED WARRANTY
We stand by our product and offer a 30-day money-back guarantee. During this
time, you could return the item without paying any extra fee if there is a
manufacturing defect in it. Please rest assured that the returns are free and
easy if there is a manufacturing defect. Otherwise, it would be the customer’s
responsibility to cover the shipping fee. Products on sale are also
returnable.
If the product isn’t meeting your expectations, please email within 30-days of
receipt.
We will help you to either return or exchange your product. Your original form
of payment will be refunded in full once the full return is complete. After
30-days orders may be subject to a 20% restocking fee and all shipping and
handling charges will be the responsibility of the customer. Additional return
details are listed below. After 60-days the purchase from Bonsaii is non-
refundable.
If you receive a damaged product, you must notify Bonsaii within 48 hours of
delivery.
Bonsaii will investigate the claim and notify the freight company about the
damage.
Please retain all packaging in the event that Bonsaii or the freight company
needs to inspect it. These investigations may take several days but
merchandise replacements will be processed as soon as possible.
For product arrived defective or damage, We’re sorry to hear that your Bonsaii
product arrived in less than perfect condition. We’d like to resolve this
issue right away with the help of our Customer Support Team and Quality
Assurance team. They’ll need to know a bit of information on your order as
well as the issue you’re experiencing with your Bonsaii product. To report
your issue, please reach out to our Customer Support team by emailing
customer-care@bonsaii.com with your order
number. We may need you to make a short video, or take some pictures of the
defects of the product and send them to customer-care@bonsaii.com. After a preliminary analysis on the video or
pictures, we will send you a brand new replacement right away if it is confirm
to be defective on its arrival. If we determine that you have misrepresented
Bonsaii product’s condition and that product is not defective, we will send
you the right instructions and help you to use the product correctly.
If you have any questions or any confusions, Please kindly contact with us:
customer-care@bonsaii.com.
Manufacture: Bonsen Electronics Limited
: No.11-12, Lun Pin Chong Industrial Zone San Tun
Community, Hou Jie Town 523941 Dongguan City, Guangdong
PEOPLE’S REPUBLIC OF CHINA
: customer-care@bonsaii.com
EUBRIDGE ADVISORY GMBH
Virginia Str. 2
35510 Butzbach,Germany
eubridge@outlook.com
EUBRIDGE ADVISORY GMBH
Virginia Strafe 2, 35510 Butzbach, Deutschland
eubridge@outlook.com
Made in China
Documents / Resources
|
bonsaii C266-B Professional Document
Shredder
[pdf] Instruction Manual
C266-B, C266-B Professional Document Shredder, Professional Document Shredder,
Document Shredder, Shredder
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>