Sinum EX-S1 Signal Extender Instruction Manual
- June 17, 2024
- Sinum
Table of Contents
EX-S1
www.sinum.eu
Extender EX-S1 is a device which enables the user to extend the signal range of peripheral devices to the Sinum central device. It connect’s wireless devices to system Sinum and send data to the Sinum central device via WiFi/LAN network. It is designed for mounting on a DIN rail.
Description
– Power
– Ethernet connection
– Ethernet connection activity
- Registration button
- Power connector
- RJ45 port
How to register the device in the sinum system – LAN
Extender should be connected to the same network as the Sinum central device using LAN wire (RJ45). Then enter the address of the Sinum central device in the browser and log in to the device. In the main panel, click the Settings > Devices > System modules > . Then briefly press the registration button ① on the device. After a properly completed registration process, an appropriate message will appear on the screen. Additionally, the user can name the device and assign it to a specific room.
How to register the device in the sinum system- WiFi
On the extender, press the registration button 1 twice, the AccessPoint mode
will be activated (the power LED will flash twice cyclically). The extender
broadcasts a Wi-Fi network named: TECH_XXXXXX that you can connect to. When a
window with a list of nearby networks appears (if the window does not appear
in the browser, enter the extender’s IP address: 192.168.4.1), select the
network to which the Sinum Central device is connected and enter the password.
If the extender successfully connects to the selected network, the power LED
will stop blinking. Log in to the same network and enter the IP address of the
Sinum Central device in the browser and connect to it. In the main panel,
click the Settings > Devices > System modules > . Then briefly press the
registration button ① on the device. After a properly completed registration
process, an appropriate message will appear on the screen. Additionally, the
user can name the device and assign it to a specific room.
NOTE: Both devices must be connected to the same WiFi network. The Wifi
network has a higher priority than the LAN connection (if the extender was
connected in both ways).
Technical data
| Power supply | 230V ±10% /50Hz |
|---|---|
| Max. power consumption | 2W |
| Operation temperature | 5°C ÷ 50°C |
| Operation frequency | 868 MHz |
| Wifi: IEEE 802.11 b/g/n (2.4 GHz) | |
| LAN: IEEE 802.3 100Mb/s |
Notes
TECH Controllers is not responsible for any damages resulting from improper
use of the system. The range depends on the conditions in which the device is
used and the structure and materials used in the object construction. The
manufacturer reserves the right to improve devices, update software and
related documentation. The graphics are provided for illustration purposes
only and may differ slightly from the actual look. The diagrams serve as
examples. All changes are updated on an ongoing basis on the manufacturer’s
website.
Before using the device for the first time, read the following regulations
carefully. Not obeying these instructions may lead to personal injuries or
controller damage. The device should be installed by a qualified person. It is
not intended to be operated by children. It is a live electrical device. Make
sure the device is disconnected from the mains before performing any
activities involving the power supply (plugging cables, installing the device
etc.). The device is not water resistant.
**** The product may not be disposed of to household waste containers. The
user is obliged to transfer their used equipment to a collection point where
all electric and electronic components will be recycled.
EU Declaration of conformity
Tech Sterowniki II Sp. z o.o. , ul. Biała Droga 34, Wieprz (34-122)
Hereby, we declare under our sole responsibility that the extender EX-S1 is
compliant with Directive 2014/53/EU.
Wieprz, 01.07.2023
The full text of the EU declaration of conformity and the user manual are available after scanning the QR code or at www.tech- controllers.com/manuals
www.tech-
controllers.com/manuals
Made in Poland
TECH STEROWNIKI II Sp. z o.o.
ul. Biała Droga 31
34-122 Wieprz Service
tel: +48 33 875 93 80
www.tech-controllers.com
support.sinum@techsterowniki.pl
References
- controllers.com
- Intelligens fűtés-hűtés, fűtési-hűtési megoldások - TECH vezérlők gyártója | TECH vezérlők
- Sinum - TECH Controllers
- Intelligent heating, smart heating solutions - manufacturer of controllers | TECH Controllers
- Manuals - TECH Controllers
- TECH Controllers - Teplo ve Vašem domě
- TECH Controllers - Teplo vo Vašom dome
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>