Sinum PPS-01 230 Energizer Portable Power Station Solar Generators Instruction Manual

: June 16, 2024
: Sinum

Table of Contents

Sinum PPS-01 230 Energizer Portable Power Station Solar Generators
Product Information
Product Usage Instructions
How to register the device in the sinum system
DESCRIPTION
Technical data
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Sinum PPS-01 230 Energizer Portable Power Station Solar Generators

Product Information

Specifications

Power supply: N/L
Max. power consumption: Not specified
Max. load of the voltage contact Q1: Not specified
Operation temperature: Not specified
Operation frequency: Not specified
Max. transmission power: Not specified

Product Usage Instructions

How to Register the Device in the Sinum System

Enter the address of the Sinum central device in the browser.
Log in to the device.
In the main panel, click on “Settings” > “Devices” > “Wireless devices” > “+”.
Briefly press the registration button 1 on the device.
After a properly completed registration process, an appropriate message will appear on the screen.
The user can also name the device and assign it to a specific room.

FAQ

Q: What is the power supply for the PPS-01 230 module?
A : The power supply for the PPS-01 230 module is N/L.

Q: What is the maximum power consumption of the module?
A: The maximum power consumption of the module is not specified.

Q: How do I register the device in the Sinum system?
A: To register the device in the Sinum system, follow these steps:

Enter the address of the Sinum central device in the browser.
Log in to the device.
In the main panel, click on “Settings” > “Devices” > “Wireless devices” > “+”.
Briefly press the registration button 1 on the device.
After a properly completed registration process, an appropriate message will appear on the screen.
The user can also name the device and assign it to a specific room.

PPS-01 230
www.sinum.eu

The PPS-01 230 module is an electronic device equipped with a voltage relay that allows the user to control 230V circuit. It is intended to be mounted in an electrical box. It communicates with the Sinum central device using radio signal.

How to register the device in the sinum system

Enter the address of the Sinum central device in the browser and log in to the device. In the main panel, click the Settings > Devices > Wireless devices > +). Then briefly press the registration button 1 on the device. After a properly completed registration process, an appropriate message will appear on the screen. Additionally, the user can name the device and assign it to a specific room.

DESCRIPTION

Technical data

Power supply	230V ±10% /50Hz
Max. power consumption	1W
Max. load of the voltage contact Q1	10A
Operation temperature	5°C ÷ 50°C
Operation frequency	868 MHz
Max. transmission power	25 mW

Notes
TECH Controllers is not responsible for any damages resulting from improper use of the system.
The range depends on the conditions in which the device is used and the structure and materials used in the object construction. The manufacturer reserves the right to improve devices, update software and related documentation. The graphics are provided for illustration purposes only and may differ slightly from the actual look. The diagrams serve as examples. All changes are updated on an ongoing basis on the manufacturer’s website.

Before using the device for the first time, read the following regulations carefully. Not obeying these instructions may lead to personal injuries or controller damage. The device should be installed by a qualified person. It is not intended to be operated by children. It is a live electrical device. Make sure the device is disconnected from the mains before performing any activities involving the power supply (plugging cables, installing the device etc.). The device is not water resistant.
The product may not be disposed of to household waste containers. The user is obliged to transfer their used equipment to a collection point where all electric and electronic components will be recycled.

EU Declaration of conformity
Tech Sterowniki II Sp. z o.0., ul. Biala Droga 34, Wieprz (34-122)
Hereby, we declare under our sole responsibility that the PPS-01 230 module is compliant with Directive 2014/53/EU.

Wieprz, 10.10.2023

The full text of the EU declaration of conformity and the user manual are available after scanning the QR code or at www.tech- controllers.com/manuals

TECH STEROWNIKI II Sp. z o.o.
ul. Biała Droga 31
34-122 Wieprz

www.tech-controllers.com/manuals
Made in Poland

Service

tel: +48 33 875 93 80
www.tech-controllers.com
support.sinum@techsterowniki.pl