Sinum DIM-S5 Wired LED Dimmer Instructions

Table of Contents

Installation

Ensure the power supply voltage matches that of the LED strips to be used.
Mount the DIM-S5 module on a DIN rail securely.
Connect the power supply and LED strips to the designated connectors on the DIM-S5.

Registering the Device

Access the Sinum Central device through a web browser and log in.
In the main panel, navigate to Settings > Devices > Wireless devices and click on the ‘+’ icon.
Briefly press the registration button (1) on the DIM-S5 module.
Upon successful registration, a confirmation message will be displayed on the screen.
You can also assign a name to the device and specify the room it is located in.

Adjusting Light Intensity

Use the controls in the Sinum Central to adjust the light intensity of the connected LED strips from 1% to 100%.</
Create different lighting scenes or automations using Sinum Central for versatile lighting options.</

Frequently Asked Questions (FAQ)

Q: Can the DIM-S5 dimmer control more than 5 LED strips simultaneously?

A: No, the DIM-S5 is designed to support up to 5 LED strips simultaneously.

Q: What is the recommended power supply voltage for the DIM-S5?

A: The recommended power supply voltage for the DIM-S5 is between 12-24V.

Q: How do I troubleshoot if the DIM-S5 is not responding?

A: Check the power supply connection, ensure proper registration with the Sinum Central, and verify compatibility with the LED strips being used.

DIM-S5 LED light dimmers enable smooth change of the light intensity of LED strips in the range from 1 to 100% of the total lighting power.
The device supports 5 LED strips simultaneously.
In the Sinum Central, you can create different lighting conditions for any scene or automation.
Communication with the Sinum Central device is wireless. It is designed to be mounted on a DIN rail.

ATTENTION! The supply voltage of the LED module should be adjusted to the supply voltage of the LED strip used.

Enter the address of the Sinum central device in the browser and log in to the device. In the main panel, click the Settings > Devices > Wireless devices > +.
Then briefly press the registration button 1 on the device. After a properly completed registration process, an appropriate message will appear on the screen.
Additionally, the user can name the device and assign it to a specific room.

Notes

TECH Controllers is not responsible for any damages resulting from improper use of the system. The range depends on the conditions in which the device is used and the structure and materials used in the object construction.
The manufacturer reserves the right to improve devices and update software and related documentation. The graphics are provided for illustration purposes only and may differ slightly from the actual look.
The diagrams serve as examples. All changes are updated on an ongoing basis on the manufacturer’s website.
Before using the device for the first time, read the following regulations carefully. Not obeying these instructions may lead to personal injuries or controller damage.
The device should be installed by a qualified person. It is not intended to be operated by children.
It is a live electrical device. Make sure the device is disconnected from the mains before performing any activities involving the power supply (plugging cables, installing the device, etc.). The device is not water resistant.
The product may not be disposed of in household waste containers.
The user is obliged to transfer their used equipment to a collection point where all electric and electronic components will be recycled.

Tech Sterowniki II Sp. z o.o. ul. Biała Droga 34, Wieprz (34-122) Hereby, we declare under our sole responsibility that the DIM-S5 module is compliant with Directive 2014/53/UE.
Wieprz, 01.02.2024
The full text of the EU Declaration of Conformity and the user manual are available after scanning the QR code or at www.tech-controllers.com/manuals .
tel: +48 33 875 93 80 www.tech-controllers.com
support.sinum@techsterowniki.pl
www.tech-controllers.com/manuals .