OPT7 Aura Dream Color Under Glow Chasing Lights User Manual
- June 17, 2024
- OPT7
Table of Contents
AURA™
DREAMCOLOR
UNDERGLOW
INSTALLATION GUIDE
MAIN COMPONENTS
INSTALLATION
STEP 1: Inspect the kit has all the contents included and power the unit
to test the lights function properly with the 12 volt adapter provided.
STEP 2: Decide where to locate the control box and ensure
wiring has enough length for light bars to be installed in desired location.
IMPORTANT:
Avoid installation areas of the engine bay + heated surfaces.
As shown below, connect all the LED bars to the control box.
- L=13 cm w / DC 12V connector
- L=11 cm w / 3P-Female connector
- L=300 cm w / 3P-Male connector
- L=250 cm w / 3P-Female connector
- L=30 cm w / 3P-Male connector
- L=250 cm w / 3P-Female connector
- L=30 cm w / 3P-Male connector
- L=30 cm w / 3P-Male connector
- L=250 cm w / 3P-Female connector
- L=30 cm w / 3P-Male connector
- L=250 cm w / 3P-Female connector
HOW TO CONNECT POWER HARNESS TO YOUR VEHICLE
– Connect the Red wire (+) of power harness to the vehicle battery’s positive
terminal.
– Connect the Black wire (-) of power harness to the vehicle battery’s
negative terminal or an unpainted area on your vehicle’s frame. WARNING
- Connecting to more than 10 AMP will override the kit and cause early failure, ensure it is 10 AMP or less!!
- Please ensure that the LED bars or strips/control box/wiring all are mounted in areas where will not exceed 85℃ or 185℉.
STEP 3: Secure Control box in desired location with Velcro or
zipties.
STEP 4: Secure the light bars using
the zip ties to tie all the wiring away from the moving components.
STEP 5:
Using the included E-Z Remote, select
your desired color or pattern.
- Power-ON
- Automatic Color Change
- Power-OFF
- Speed +/- 10Levels
- Mode +/- 20 Mode
- Dimmer 10 Levels
- Color Selection 12 Colors
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time.
OPT7 Lighting assumes no responsibility for improper installation. If you are
unfamiliar with your vehicle or inexperienced with aftermarket upgrades,
please seek professional assistance.
OPT7 recommends installation for safety and guidance.
Modified installations or installation recommendations not specified by
OPT7 Lighting will void product warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>