MARS HYDRO VG Series LED Grow Light Bars User Manual
- June 21, 2024
- MARS HYDRO
Table of Contents
VG Series LED Grow Light Bars
User Manual
SPECIFICATIONS & CONTENTS
| | | | |
---|---|---|---|---|---
Model| Picture| Input Power and Voltage| Max Qty of LED Bar (Just Use One
Power Cord)| The LED Fixture Cable Length| Dimensions/Weight
VG80| 
| 80W±5%@AC100-277V| 8pcs at 100-110V
16pcs at 220-240V| Light bar IN cable 0.5m (19.6”) Light bar OUT cable 0.5m
(19.6”) Power INPUT cable 1.5m (59”)| 11505031MM 1.5KG
VG40| | 40W±5%@AC100-277V| 16pcs at 100-110V
32pcs at 220-240V| Light bar IN cable 0.7m (27.6”) Light bar OUT cable 0.7m
(27.6”) Power INPUT cable 1.5m (59”)| 6005031MM 0.94KG
VG80-R| | 80W±5%@AC100-277V| 8pcs at 100-110V
16pcs at 220-240V| Light bar IN cable 0.7m (27.6”) Light bar OUT cable 0.7m
(27.6”) Power INPUT cable 1.5m (59”)| 960.55031MM 1.33KG
VG40-R| 
| 40W±5%@AC100-277V| 16pcs at 100-110V
32pcs at 220-240V| Light bar IN cable 0.7m (27.6”) Light bar OUT cable 0.7m
(27.6”) Power INPUT cable 1.5m (59”)| 600503
VG40 INSTALLATION METHOD
VG40 & VG40-R & VG80-R INSTALLATION METHOD
Fit Directly Into The Main Light Frame White Baked Painting Shell
Use zip ties to secure the light strip to the main light frame
Note: lt is recommended to use VG80-R with FC6500/FC-E6500 and larger
lights.
Horizontal Suspension With Main Light
Note: lt is recommended to
hang VG40-R horizontally next to FC3000/FC-E3000 /FC4800/FC-E4800. Attach the
hanging rope to the hook on the light bar. Hang the lamp on the pole using the
hook of the hanging rope.
VG40-R &VG80-R SUGGESTED PLACEMENT
MULTIPLE LIGHTS CONNECTION
To connect the
power cord, align the terminals of the cord, plug in and twist to secure.
To disconnect the power cord, twist the two halves away from each other first
then pull apart.
WARNINGS
Warning! Carefully read the warnings below before using or working with the
product!
Always adhere to the local rules and regulations when installing or using the
LED fixture.
Environment:
The LED fixture is intended to be used in climate-controlled grow rooms and
indoor farms.
The product may be used in damp environments but may not be used in wet
environments or outdoors The product will operate in ambient temperatures from
-20ºC to 35ºC but will function at optimal level between 20ºC to 30ºC.
The product will operate in 20% – 90% humidity, non-condensing.
Do not open or disassemble the LED fixture as it contains no serviceable parts
inside. Opening or modifying the LED fixture can be dangerous and will void
the warranty.
Do not use the LED fixture when either the LED fixture or its power cable are
damaged. Replace the power cable with correctly rated cable only.
Modifications to the cables can lead to unwanted electromagnetic effects which
may make the product not comply with legal requirements.
Do not expose the LED fixture to:
Condensing humidity, heavy mist or direct spray;
Ambient temperatures outside the specified range;
Dust and contamination;
Direct sunlight during use or HID light that may heat up the driver.
Always disconnect the LED fixture from mains before performing any
maintenance.
Always allow for a cool down period of at least 20-30 minutes before touching
the LED light bars.
Touching the LED bars when the fixture is lit or immediately after may result
in burns!
Do not use abrasive materials or aggressive cleaning agents to clean the LED
fixture as this may damage the secondary optics.
Instead use a clean dry fabric/cloth.
Do not use sulphur vaporizers or water misters.
The installation and use of the LED fixture is the responsibility of the end
user. Incorrect use or installation can lead to failure and damage to the LED
fixture. Damage to the LED fixture and electronic circuitry as a result of
incorrect installation and use revokes
the warranty.
WARRANTY PROCEDURE
Contact Solutions Team:
[ [email protected] ] with the following
information readily prepared:
- Your Order information. Including your order number, purchase platform, and order email.
- A detailed description of the issue with pictures and/or videos.
- Photos of all labels on the original box. (if preserved)
- Associated proof of faulty/defective products. Photos and videos will help our team to provide a faster warranty service.
Mars Hydro Solutions Team will be at your service as soon as possible.
W: www.mars-hydro.com
E : [email protected]
T : 1 626 587 8506(US No.)
A : JinTie Industrial Park,
LongGang District,
ShenZhen,518100,China