Immax GU10 NEO Smart LED Lampe User Manual
- June 17, 2024
- immax
Table of Contents
Immax GU10 NEO Smart LED Lampe
Product Information
Specifications:
- Manufacturer: P.R.C.
- Product Name: Immax NEO PRO Smart Gateway
- Function: Hub for communication between mobile device and smart home devices
- Compatibility: Works with smart color-changing LED light bulbs like Immax NEO LED Bulbs
- Connectivity: Supports Zigbee 3.0 protocol
Product Usage Instructions
Pairing LED Lamps and App (Immax NEO PRO)
1. Download and open the Immax NEO PRO application on your mobile device.
2. Follow the on-screen instructions to pair your LED lamps with the app.
3. Note any discrepancies between the iOS and Android versions of the app.
Unpair Equipment from Immax NEO PRO Smart Gateway
-
Open the Immax NEO PRO application.
-
Click on the Room icon.
-
Select the device you want to unpair.
-
Click on the icon in the upper right corner of Settings.
-
Click Remove device.
-
Select either:
-
a) Disconnect – removes the device from the app but keeps info
in Immax NEO cloud. -
b) Disconnect and wipe data – removes device from app and
cloud.
-
-
Confirm the removal of the device.
Immax NEO LED Bulb Reset
- Turn off and on the Immax NEO LED bulb 5 times consecutively with 1-2 seconds interval.
- The LED will flash to indicate a successful reset.
Maintenance
Protect the device from contamination and soiling by wiping with a soft cloth. Avoid solvents or aggressive cleaners.
FAQ
Q: Where can I find more information about the product’s conformity?
A: You can find more information on www.immax.cz or refer to the Declaration of Conformity issued for the product.
TECHNICAL SPECIFICATIONS
- Protocol: ZigBee 3.0
- Frequency: 2400MHz~2483.5MHz
- Maximum RF output power: WiFi: 10dBm – max 19dBm
- Power consumption: 4.8W
- Network standby power (Pnet): 0.4W
- Socket: GU10
- Light bulb body material: plastic
- Light color: CCT + RGB
- Color temperature: 2700K-6500K
- Luminous flux: 400lm (in a 360° sphere)
- Light beam angle: 120°
- Input voltage: AC 230V
- Average lifetime: 25,000 hours
- Color rendering index:>80Ra
- Dimensions: 50 x 55 mm
- Corresponds to a classic light bulb: 25W
- Number of switching cycles: 100,000
- Instant lighting
- Energy class (EEI): G
- Power factor: >0.5
- Dimming option: YES
- Certificates: CE
The Gateway serves as a hub for communication between your mobile device and other smart Home devices. The smart colour-changing LED light bulbs are used for lighting up interiors. PAIRING LED LAMPS AND APP IMMAX NEO PRO
NOTES:
The Android version of the app follows the same principles as the iOS version;
you might encounter discrepancies between the two plat
forms, such as slightly different on-screen commands or icons. Updating the firmware might result in changes to the app’s functionality.
PREPARATION
- Switch off the light with the wall switch.
- Screw the Immax NEO LED bulb into the luminaire socket.
- Switch on the light with the wall switch – the LED bulb should start flash. If the LED does not flash, reset it.
- Everything is ready for pairing.
- Open the Immax NEO PRO application.
- Click on the “Room” icon.
- Click on the “+” icon to add a new device.
- In the left column, select the Immax NEO category.
- Select the zigbee LED bulb from the products offered.
- Select the smart gateway with which you want to pair this device (Note: this is necessary if you have more than one smart gateway Immax NEO PRO).
- Click on the “Next Step” icon.
- Confirm that the LED is flashing.
- Click on the “Next step” icon.
- Wait until the device is properly paired with the smart gateway Immax NEO PRO.
- Enter the device name.
- Select the room in which you want the device to be located.
- Click “Done.”
UNPAIR EQUIPMENT FROM THE IMMAX NEO PRO SMART GATEWAY
- Open the Immax NEO PRO application
- Click on the “Room” icon
- Select the device you want to unpair
- Click on the icon in the upper right corner of “Settings”
- Click “Remove device”
- Select one of the options
- a) Disconnect – removes the device from the Immax NEO PRO application, but device information remains stored in the Immax NEO cloud
- b) Disconnect and wipe data – removes the device from the application Immax NEO PRO and from the Immax NEO cloud
- Confirm the removal of the device
IMMAX NEO LED BULB RESET
- Turn off and turn on Immax NEO LED bulb 5 times in a row. The interval between switching off and switching on should be at least 1-2 seconds.
- The LED will start flashing after a reset.
SAFETY INFORMATION
CAUTION: Keep out of reach of children. This product contains small parts,
which may cause suffocation or injury if swallowed.
WARNING: Every battery has the potential to leak harmful chemicals that can
damage skin, clothing or area where the battery is stored. To avoid the risk
of injury, do not allow any substance from the battery to come into contact
with the eyes or skin. Every battery may burst or even explode if exposed to
fire or other forms of excessive heat. Take care when handling the batteries.
To reduce the risk of injury from mishandling the batteries, take the
following precautions:
- Do not use different brands and types of batteries in the same device
- When replacing the batteries, always replace all the batteries in the device
- Do not use rechargeable or reusable batteries.
- Do not allow children to insert batteries without supervision.
- Follow the battery manufacturer’s instructions for proper battery handling and disposal.
- CAUTION: The product and batteries should be disposed of at a recycling centre. Do not dispose of them with normal household waste.
- CAUTION: To ensure safe use of the product, wires must be brought at the installation site according to valid regulations. The installation must only be carried out by an individual with the appropriate certification in the field of electronics.
During installation or when a fault is detected, the power cable must always be disconnected from the socket (in the case of direct connection, the relevant circuit breaker must be switched off). Improper installation can damage the product and cause injury. CAUTION: Do not disassemble the product, electric shock may occur. CAUTION: Use only the original power adapter provided with the product. Do not operate the device if the power cord shows signs of damage. CAUTION: Follow the instructions in the enclosed manual.
MAINTENANCE
Protect the device from contamination and soiling. Wipe the device with a soft cloth, do not use rough or coarse materials. DO NOT USE solvents or other aggressive cleaners or chemicals. A Declaration of Conformity has been issued for this product. More information can be found at www.immax.cz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>