immax 07768L Zigbee Smart Button User Manual

: October 30, 2023
: immax

Table of Contents

TECHNICAL SPECIFICATIONS
QUICK GUIDE
INSTALL THE BATTERY / RESET / PAIRING
REMOTE CONTROL MODE
CONTROL DESCRIPTION UNDER REMOTE MODE
SAFETY INFORMATION
MAINTENANCE
Documents / Resources

Zigbee Bluetooth
V1.3A

TECHNICAL SPECIFICATIONS

Protocol: ZigBee 3.0

Frequency: 2400MHz~2483.5MHz

Maximum RF output power: ZigBee:10dBm – max 19dBm

Wireless range: 25 m open area

Battery: 1x CR 2032 3V (not included)

Battery life: 1 year general use

Operating temperature: -10 ° C až 45 ° C.

Operating humidity: < 80%

Ingress Protection: IP20

QUICK GUIDE

Remote control mode

INSTALL THE BATTERY / RESET / PAIRING

APPLICATION DOWNLOAD
Download the app using the QR code.
Gateway is required to connect device.

https://smartapp.tuya.com/immaxneosmart

ADD DEVICE

REMOTE CONTROL MODE

First time to add smart light MUST press the button to activate memory.
MODE SWAP

CONTROL DESCRIPTION UNDER REMOTE MODE

| ON/OFF
Single Press
---|---
| Rotate
Dimming
| Press and Rotate
Set the color temperature
| Long Press >3s
Set color

Note: The above functions may be different depending on the model of the smart bulb

SCENE MODE

SAFETY INFORMATION

CAUTION: Keep out of reach of children. This product contains small parts, which may cause suffocation or injury if swallowed.
WARNING: Every battery has the potential to leak harmful chemicals that can damage skin, clothing or area where the battery is stored. To avoid the risk of injury, do not allow any substance from the battery to come into contact with the eyes or skin. Every battery may burst or even explode if exposed to fire or other forms of excessive heat. Take care when handling the batteries. To reduce the risk of injury from mishandling the batteries, take the following precautions:

Do not use different brands and types of batteries in the same device
When replacing the batteries, always replace all the batteries in the device
Do not use rechargeable or reusable batteries.
Do not allow children to insert batteries without supervision.
Follow the battery manufacturer’s instructions for proper battery handling and disposal.

CAUTION: The product and batteries should be disposed of at a recycling centre. Do not dispose of them with normal household waste.
CAUTION: To ensure safe use of the product, wires must be brought at the installation site according to valid regulations.
The installation must only be carried out by an individual with the appropriate certification in the field of electronics. During installation or when a fault is detected, the power cable must always be disconnected from the socket (in the case of direct connection, the relevant circuit breaker must be switched off). Improper installation can damage the product and cause injury.
CAUTION: Do not disassemble the product, electric shock may occur.
CAUTION: Use only the original power adapter provided with the product. Do not operate the device if the power cord shows signs of damage.
CAUTION: Follow the instructions in the enclosed manual.

MAINTENANCE

Protect the device from contamination and soiling. Wipe the device with a soft cloth, do not use rough or coarse materials.
DO NOT USE solvents or other aggressive cleaners or chemicals.
A Declaration of Conformity has been issued for this product. More information can be found at www.immax.eu
If you have any questions or need advice, please contact us at [email protected]

Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU |www.immax.cz
Designed in the Czech Republic, manufactured in China