Immax 07087-5 Remote Control Instruction Manual

Immax 07087-5 Remote Control

Product Information

Model: IMMAX NEO LITE REMOTE CONTROL WITH BEACON FUNCTION

Compatibility: Bluetooth beacon protocol,compatible with WiFi, Bluetooth mesh, and beacon devices

Specifications

• Bluetooth beacon protocol
• Compatible with WiFi, Bluetooth mesh, and beacon devices
• Night mode dims light to 5% luminous intensity
• RGB color backlight control
• Ability to create and control lighting groups

Product Usage Instructions

Turning On/Off Lights
Short press the button to turn on or off all lights paired to the remote control.

Night Light Mode
Press the designated button to activate the night mode, which dims the light to 5% of its luminous intensity.

Scene Selection
Briefly press the scene button to switch between different scenes.

RGB Color Backlight

To control the RGB color backlight:

• Short press to switch between preset colors (red, orange,yellow, green, blue, purple).
• Long press for a smooth color transition.

Grouping Lights

To create and control lighting groups:

• Long press any A/B/C/D button to pair the luminaire with the remote control.

FAQ

Q: How do I pair the remote with my lights?
A: Long press any A/B/C/D button to pair the luminaire with the remote control.

Q: Can I control the RGB color backlight?
A: Yes, you can control the RGB color backlight by short pressing to switch colors or long pressing for smooth transitions.

IMMAX NEO LITE REMOTE CONTROL WITH BEACON FUNCTION on bluetoth beacon protocol, compatible with WiFi, bluetoth mesh and beacon devices.

PAIRING THE LIGHT WITH THE REMOTE CONTROL

Before you pair the light to the Immax NEO PRO application, you need to pair the light with the controller.
Turn the light off for 5 seconds and then turn it on. Press the ON/OFF button on the controller for a minimum of 5 seconds. The light should flash when successfully paired with the controller.
If the light fails to pair with the controller, reset the light. Allow the light to flash and then turn it off and on again. You can then repeat pairing the light with the controller

On/Off
Short press to turn on/off ALL lights that are paired to the remote.

Night light
Press the button to switch on the night mode, the lamp is dimmed to 5% of the luminous intensity

Bright+
Press the button to increase the brightness of the light

1. Short press – step increase in brightness
2. Long press – smooth increase in brightness.

Bright-
Press the button to dim the brightness of the light.

1. Short press – step dimming
2. Long press – continuous dimming

Light temperature +
Press the button to increase the colour temperature of the light. Transition to a cool shade (up to 6500K)

• Short press – step increase in white light temperature
• Long press – stepless increase in white light temperature

Light temperature –
Press the button to lower the light colour temperature. Transition to a warm shade (up to 2700K)

• Short press – stepwise reduction of the white colour temperature of the light
• Long press – stepless reduction of the white light temperature

Scenes
Press briefly to switch the scene.

RGB colour backlight The colour-switching feature is only available on devices that support it!
Button to control RGB backlight

1. Short press to switch one color at a time and the preset color cycle is red, orange, yellow, green, blue and purple.
2. Long press for a smooth colour transition

A/B/C/D

1. Buttons for creating and controlling lighting groups
2. Long press any A/B/C/D button to pair the luminaire with the remote control

Technical parameters

• Material: Environmentally friendly PC material.
• Color: White
• Power : 3V (CR2032)

This remote control can control a luminaire or groups of luminaires from a distance of up to 25m.
Pairing and unpairing under groups A/B/C/D

Pairing

Within 30 seconds after switching on the luminaire, long press any of the A/B/C/D buttons for 5 seconds or more, the indicator light will flash once to indicate successful matching (flashing 3 times if WiFi products).

• This assigns the luminaire under your selected button and allows you to create groups of lights to be controlled under your selected group button A/B/C/D

• Cancel pairing.
  configured in this group, after successful cancellation of pairing the light will flash once (flash 3 times in case of WiFi products).

• Each beacon-enabled luminaire can be controlled by up to 3 remotes.

Function description

• Group control: Press any group button (A/B/C/D) to switch the luminaire group
• E.g.: you can control all luminaires of group A by pressing the „A“ button.
• Switch on/off: you can switch on/off all luminaires paired under group button A
• Press the „CCT+“ and „CCT-“ buttons to decrease or increase the color temperature by „20%“ at the same time.
• Long press to dim continuously. (Bluetooth does not support continuous dimming).
• Press „brightness+“ and „brightness-“ to adjust the brightness by 10% each time.
• Long press to dim the brightness continuously (Bluetooth does not support continuous dimming).

Warning:
The above functions are only applicable to products on WiFi, Bluetooth, Sigmesh and tuya Beacon protocol.
Keep the remote control (RC) in a clean and dry environment. Do not immerse the DO in water and prevent the DO from coming into contact with water. Remove dirt only with a dry or damp cloth!
Be sure to insert new batteries in the correct manner and in accordance with the symbols for the location of the positive (+) and negative (-) poles of each battery. Do not confuse the polarity of the battery.
Replace batteries regularly with new ones and recycle old ones in accordance with local regulations.

Manufacturer and importer: WPB CZ, s.r.o. Pohoří 703, 742 85 Vřesina, Czech Republic
www.immax.cz 
www.immax.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>