Immax 07574L NEO Smart Electronic Single Phase Circuit Breaker User Manual
- June 1, 2024
- immax
Table of Contents
07574L
USER MANUAL
MAIN FUNCTIONS
Remote control
Timing
Time loop
Voice control
Countdown
Real-time power consumption monitoring
TECHNICAL PARAMETERS
Protocol: WiFi
Frequency: 2400MHz~2483.5MHz
Maximum RF output power: WiFi: 20dBm
Network standby power (Pnet): 0.4W
Power: AC 100 – 260 50Hz/60Hz.
Max. load: 26kW
Current protection: 1-63A (adjustable in the application)
Overvoltage protection: 220-265V (adjustable in application)
Undervoltage protection: 76-240V (adjustable in application)
Thermal fuse, overheat protection: yes
Current fuse, overvoltage and overload protection: Yes
Communication protocol: Zigbee, Tuya support.
Wireless range: 30 m direct visibility, 10 m in built-up area
Operating temperature: -25°C to 70°C
Material: flame retardant PC V0
Installation: on DIN rail
Number of switching circuits: 1
Dimensions: 82 x 18 x 66 mm
Degree of protection: IP20
LED INDICATOR LIGHTS
The LED indicator glows solid blue to indicate a successful NETWORK
CONNECTION.
LED indicator blinking blue slowly indicates the STEAMING status
If the LED indicator is not lit, it indicates the device is not connected to
the network (OFF GRID)
The ON LED indicator is lit to indicate the status of the ON switch.
The unlit LED BUTTON indicator indicates the OFF switch status
REAL-TIME CONSUMPTION MONITORING
With an electronic circuit breaker, you can monitor the current, voltage and power of your equipment in real time. You can track power consumption by day, month or year, which helps you better control the power consumption of the devices located behind that electronic breaker.
Real-time
monitoring of electricity consumption
GETTING THE DEVICE UP AND RUNNING
-
Connect the power line wires from above to the electronic circuit breaker (see picture). Connect the live wire (L) to the L socket and the neutral wire to the N socket.
-
Make sure you have WiFi and Bluetooth enabled on your mobile phone. Long press the button on the electronic circuit breaker. The LED indicator on the button will start flashing.
-
Open the Immax NEO PRO app and click on + (Add new device).
Hold for a moment, if the device does not appear in the menu by itself, then click on Other WiFi devices. -
Enter the WiFi name and password for your WiFi network. The WiFi network must be 2.4GHz.
-
Wait for the device to be added to the app.
IMMAX NEO PRO APPLICATION AND DEVICE PAIRING
3.1 Scan the QR code and download the Immax NEO PRO application. Or find and
install the Immax NEO PRO app in the App Store or Google Play.
Launch the Immax NEO PRO application and click on “Register” and create your
own account via e-mail.
https://smartapp.tuya.com/immaxneosmart
Safety information for this product can be downloaded from
www.immax.eu.
A Declaration of Conformity has been issued for this product, more information
can be found at www.immax.eu
If you have a question or need advice, contact us at
support@immax.eu
**
Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU | www.immax.cz
Made in P.R.C.**