LOTIM CLOUD LCD02 4G Adas DMS 2 Channel Dashcam User Manual

LOTIM CLOUD LCD02 4G Adas DMS 2 Channel Dashcam

Product Information

The 4G ADAS DMS 2CH DASHCAM Model LCD02 is an active safety management tool designed for fleets. It is equipped with advanced features such as GPS and BeiDou satellite positioning, 4G, 3G, andGSM/GPRS wireless communication network support, and ADAS (Advanced  Driver Assistance Systems) and DMS (Driver Monitoring System) cameras.

Product Description
The LCD02 Dashcam is a 2-channel device that records video and captures alarm events. It comes with an ADAS camera with a base, a DMS camera with internal cameras, a power supply harness, a unit cover for TF card, SIM card, and USB, and screws for fixing the cover. The package also includes two types of bases for light vehicles and heavy vehicles, with the default being the light vehicle version. To continue the trend in improving safety and reach the industry’s goal of zero vehicle-related accidents and fatalities, vehicles must help drivers stop hitting things, so it is time to take Active Safety with ADAS and DMS etc. LCD02 supports 4G + 3G + 2G + Bluetooth + WIFI network communication, GPS real-time location and alarms, 2CH cameras (ADAS + DMS) in 1080P resolution, and so on, helps fleet managers easily to identify those good drivers from bad ones, lowering the operation cost and insurance fee, therefore improving transportation efficiency.

Warning

1. This device is suitable for adults. People with physical disability and cognitive impairment must use it under the supervision of a guardian.
2. Keep the product accessories and packaging materials away from children to avoid accidents or choking hazards.
3. Do not use the device if it is obviously damaged.
4. The device should only be used for its designed purpose andmust be used in accordance with the instructions.
5. This device is suitable for adults. People with physical disability and cognitive impairment must use it under the supervision of guardian.
6. Keep the product accessories and packaging materials away from children, otherwise there may be accidents or choking hazard.
7. Do not use if it is damaged obviously.
8. The device is only used for its designed purpose and must be used in the manner indicated. The manufacturer shall not be responsible for any damage caused by any improper or reckless act.
9. It is strictly forbidden to use the equipment in violation of the operating instructions, disassemble it without permission, collide, charge, soak in water, exceed 80℃, man-made failure, force majeure damage, etc., otherwise it may cause short circuit, insufficient working time, battery deformation, night leakage, explosion, etc. Loss, no warranty and compensation will be made.
10. Clean the equipment in the prescribed way. Do not use any solvents and disconnect the power supply in advance when cleaning.

Precautions

• There are two versions of LCD02 that correspond to different network frequencies. Pay attention to the label on the body when using it.
• Do not expose this device to rain and high temperatures during installation and use.
• Positioning failure or abnormal communication may occur due to factors such as bad weather, artificial shielding of wireless signals, and blind areas of wireless signal coverage.
• To achieve better communication and positioning performance, do not place the device in metal shielding boxes or under places with metal surfaces.
• The device requires the cooperation of a monitoring platform to implement all its features. Refer to the relevant monitoring platform usage specifications for details.
• The contents of this manual may be subject to change with out notice. Please refer to the actual product.
• During installation, calibration with the Android APP (ReachengOperation Tool) is needed.
• This product uses GPS and BeiDou satellite positioning, and there are irresistible factors that cause positioning failure or abnormal communication, such as bad weather, artificial shielding of wireless signals, blind areas of wireless signal coverage, etc.
• This device supports 4G, 3G and GSM/GPRS wireless communication network. To achieve better communication and positioning performance, please be sure not to place it in metal shielding boxes or under place with metal surface.
• This device requires the cooperation of the monitoring platform to implement all its features. For details, please refer to the relevant monitoring platform usage specifications.

Hardware Operation

Insert TF Card
The LCD02 records video and alarm events on an SD card. Prepare a TF card in FAT32 format with a capacity ranging from 16GB to 512GB. For optimal performance and storage, it is recommended to use a 128GB or 256GB TF card.

SIM Network and WIFI Connection
You can choose either WIFI network connection or SIM card connection for the device. For SIM network connection, insert a Micro SIM card into the device’s SIM card slot. User could choose WIFI network connection or SIM card connection. For SIM network, please insert a Micro SIM card in the direction shown as device SIM card slot.

• Activate SMS and network function on the terminal SIM card.
• Ensure that the terminal SIM card has balance.
• If the SIM card requires a PIN, refer to your mobile phone user manual to turn off the SIM PIN input function.
• The terminal SIM card needs to activate SMS and network function.
• Please ensure that the terminal SIM card has balance.
• If your SIM card is turned on and you are required to enter the SIM PIN, please refer to your mobile phone user manual to turn off the SIM PIN input function.

For WIFI network, it will be turned off when ACC off. Please make sure there is a stable and high-speed-transmission WIFI router in vehicle. First time WIFI connection need to be set up by Micro Android data cable with PC by Android screening software. (Further details, please get help from your supplier.)

Wiring
When wiring device to vehicle, the device must be power off status.

After wiring, wrap the exposed wire connector with black tape (electrical tape).

Power on Verification
After completing the wiring, do a reconfirmation wires all connected rightly. Then turn device power on, if the LED turns from red to green, device is working normally.

Operation of indicator light
By checking the status indicator, you can understand the working status of the device. The status of the indicator is described as follows:

We’re appreciated that you choose on LCD02, a 4G ADAS DMS 2CH DASHCAM as an active safety management tool for your fleets. Please read this user manual book carefully and follow the instruction. It is suggested that you keep this user manual book for future use.

Production composition

Package Items:

Note: two types of base for light vehicle and heavy vehicles, in default it comes with light vehicle version.

Interface Introduction:

Installation on Car/Vehicle

Preparation
It is highly recommended to install the device by experts in vehicle. Here the tool list may be in use.

Installation
The DMS camera is mainly installed in top of the dashboard within 60- 90cm from the driver, and the main camera is installed in the middle of the windshield facing front. Uncover the 3M adhesive sticker of the base and DMS camera respectively, and gently stick the device on the recommended position. Then press and hold the device firmly for 20 seconds to make sure it is fixed. To gain higher location accuracy, it is recommended to install the device in car or vehicle as images shown.

There are two types of base for light vehicle and heavy vehicles, in default it comes with light vehicle version. According to different models, the installation method is slightly different.

Calibration for ADAS and DMS
Whether ADAS and DMS could measure and alert accurately, it is highly depending on the installation and setting of vehicle parameters. Therefore, a calibration on ADAS and DMS is necessary. First park the vehicle aside the flat road and make sure there are no obstacles within 30 meters in front, it would be the best if there are road marking lines such as image below:

Android APP: Nebula
APP: ReachengOperation Tool (ReachengOperation Tool.apk), only supports Android 5.1 and above q

WIFI hotspot
WIFI hotspot is used for sharing WIFI, video & images transmission and calibration. Power on the device, its LED changes from red to green, then press & hold the “Power Button” and “Volume down (-)” together for 3 seconds, LED will be off and turns blue, it means that the hotspot is successfully started. WIFI hotspot is named by its IMEI number (shown on device), password in default is 12345678.

Calibration on ADAS

• Step 1: click “Start Install ” in Reacheng Operation Tool APP

• Step 2: there are 3 green line shown on screen, adjust the camera position to make sure the skyline is at the same level as the green line.

• Step 3: “Calibration” button to end ADAS calibration.

Calibration on DMS

• Step 1: Click the “DMS Calibration” on ReachengOperation Tool APP
• Step 2:

• Step 3: After DMS calibration, auto detection, analysis and warnings work when vehicle speed is higher than 30km/h.

ADAS and DMS introduction

When driving speed is higher than 50km/h, ADAS and DMS warnings will generate 10 seconds video (5s before and 5s after) and 3 pieces images and upload them all to monitoring system.

ADAS
Horizon’s Advanced Driver Assistance System (ADAS) can accurately perceive, identify and locate vehicles, pedestrians, traffic signs and other targets on the road forward, and prompt drivers to make travel safer. The device has the following functions:
HMW Headway Monitoring & Warning monitors the distance keeping with the vehicle in front.
Voice: Please keep the vehicle distance!
FCW Forward Collision Warning when speed higher than 30km/h, it detects the dangerous situation that vehicle speed is much higher than the vehicle in front, and a collision is about to occur.
Voice: Watch out!

DMS
Horizon DMS (Driver Monitoring System) provides customers with a complete driver behavior detection system that can be used to driver safety behavior detection and early warning functions, such as fatigue driving, looking around, looking down, smoking, making calls and other dangerous behaviors. Thanks to the 940nm infrared low-power camera, it can accurately obtain the driver’s facial features under various lighting conditions such as strong light, dark light, and metering in the cab, as well as when the driver wears sunglasses, for effective real-time monitor. DFW Driver Fatigue Warning occurs if the driver is identified for closing eyes and yawning. Voice: Attention, drowsiness is detected. Or Please awake. DDW Driver Distraction Warning, If the driver does not look straight ahead for a period (including looking left and right, head swinging left, head swinging right, head up, head down), the system will issue a warning.
Voice: Please face forward.
DSA Driver Smoking Alarm occurs if the driver’s smoking behavior is recognized.
Voice: No smoking!
DCA Driver calling Alarm occurs when driver having a hand-held phone call for a period of time.
Voice: Please do not use mobile phone.
DAA Driver Abnormal Alarm happens when the driver is not being detected.
Voice: Please do not block the camera. Or please return to the driver seat.

Data sheet

APPEARANCE

Shell Material| Plastic| PC+ABS
Cable harness| Main cable| Power Positive: red Power Negative: black
ACC: orange
RS232 TX:
RS232 RX:
DMS or AHD| DMS or AHD camera
Interface| SIM card slot| Micro SIM
SD card slot|
USB interface| Micro USB 2.0, for debug
Button| Power| Power on/off
Volume +|
Volume –|
One LED (4 colors)| Green solid on| Working Normally
Red flashing| The system is starting or Failed to power on
Red solid on| Device error in below circumstance: Wrong IMEI no. Wrong camera number or no AHD connected SD card error SIM card error
Blue flashing| Under calibration mode, WIFI hotspot is on and waiting for connection
Blue solid on| Under calibration mode, WIFI is connected
Yellow flashing| SIM card detected but failed to connect to network
PERFORMANCE
Temperature| Operating temperature| –20℃ to 70℃
Storage temperature| –40℃ to 85℃
Humidity| Operating humidity| 95%
Storage humidity| 95%
Power| Operating
voltage| 11–24V
---|---|---
ESD protection| Contact: 6KV; Air: 10KV
Reversed connection protection| Protects against positive-negative reversed connection
Flame retardancy| Main unit| UL94 V-0
Accessories| UL94 V-0
NETWORK
Version| 4G LTE| BAND 1/3/5/7/8/20
BAND 38/39/40/41(100Mhz)
WCDMA| BAND 1/8
GSM| GSM900/1800MHz
HARDWARE
CPU| MTK8665| Quad-core ARM® Cortex-A53MPCoreTM, operating at 1.5ghz LPDDR 3 can be up to 3GB, 640 MHz
GPU| √| Dual-core Mali – T720 GPU
RAM| 1GB|
ROM| 8GB|
ADAS Camera| Build-in| MIPI / 1920×1080 / 25FPS
DMS Camera| External| AHD / 1280×720 / 25FPS
SD Card| √| 1TF card (Max. 512G), Format：FAT32
SIM card| √| 1Micro SIM
G-Sensor| √| TDK40608, 6-axis
Communication Network| Build-in| 2G, 3G, 4G
GNSS Antenna| Build-in| GPS+BDS
Bluetooth| Build-in| BT4.0 2.4G
WIFI| 2.4G| 802.1 b/g/n
Speaker| √| 1.2W
MIC| √|
External
Interface| 1*RS232|
SOFTWARE
Operating System| Android 5.1|
---|---|---
Language| English|
Audio| AAC|
Video| Format: MP4| Code: H.264
**** Power Consumption| Normal working: 200~800mah| ACC ON
Standby average power: 5ma| ACC OFF
CERTIFICATION (pending)
CE| √
FCC| √

Repair and disposal

1. Never attempt to repair the instrument or adjust it yourself. We can no longer guarantee perfect functioning if you do it.
2. Repairs may only be performed by Customer Service or authorized dealers.
3. For environmental reasons, do not dispose of the device in the household waste at the end of its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance with EC Directive ‒ WEEE (Waste Electrical and Electronic Equipment).
4. If you have any questions, please contact the local department responsible for waste disposal.

Warranty card

**** Maintenance Card

Maintenance shop|
Delivery information|
Fault description|
**** Maintenance result|
IMEI number|
Operator|

Caution:
For the following equipment:
Product Name: 4G ADAS DMS 2CH DASHCAM
Brand Name: Lotimcloud
Model No.: LCD02
Guangzhou Lotim Technology Co., Ltd.
E-mail: lotim01@lotimcloud.com
hereby declares that this [Name: 4G ADAS DMS 2CH DASHCAM, Model: LCD02] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The product shall only be connected to a USB interface of version USB2.0 and that the connection to a power USB is allowed. This product is intended for sale and application in a business environment. RED Article 10 2

• This product can be used across EU member states RED Article 10 10
• The product is class 1 product, No restrictions

The RF distance between body and product is 20cm.
2G
Frequency Range:
GPRS900: Tx: 880-915MHz, Rx: 925-960MHz
GPRS1800: Tx: 1710-1785MHz, Rx: 1805-1880MHz
RF Output Power:
GPRS900: 32.35dBm, GPRS1800: 29.04dBm
EDGE900: 27.66dBm, EDGE1800: 25.23dBm
3G
Frequency Range:
WCDMA Band 1: Tx: 1920-1980MHz, Rx: 2110-2170MHz
WCDMA Band 8: Tx: 880-915MHz, Rx: 925-960MHz
RF Output Power: WCDMA Band 1: 22.76dBm, WCDMA Band 8: 22.87dBm

4G
Frequency Range:
FDD-LTE Band 1: Tx: 1920-1980MHz, Rx: 2110-2170MHz
FDD-LTE Band 3: Tx: 1710-1785MHz, Rx: 1805-1880MHz
FDD-LTE Band 7: Tx: 2500-2570MHz, Rx: 2620-2690MHz
FDD-LTE Band 8: Tx: 880-915MHz, Rx: 925-960MHz
FDD-LTE Band 20: Tx: 832-862MHz, Rx: 791-821MHz
TDD-LTE Band 38: Tx: 2570-2620MHz, Rx: 2570-2620MHz
TDD-LTE Band 40: Tx: 2300-2400MHz, Rx: 2300-2400MHz

Max.RF Output Power:
FDD-LTE Band 1: 23.19dBm, FDD-LTE Band 3: 22.78dBm,
FDD-LTE Band 7: 22.92dBm, FDD-LTE Band 8: 23.69dBm,
FDD-LTE Band 20: 23.89dBm,
TDD-LTE Band 38: 24.18dBm,
TDD-LTE Band 40: 23.32dBm

Bluetooth
Frequency Range: 2402-2480MHz
Max.RF Output Power: 6.88dBm (EIRP)

Wi-Fi(2.4G)
Frequency Range:
2412-2472MHz for 802.11b/g/n(HT20)
2422-2462MHz for 802.11n(HT40)
Max.RF Output Power: 17.49dBm (EIRP)

GPS
Frequency Range: 1575.42MHz Receiving

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

FCC Warning
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>