Immax NEO Smart Radiator Actuator Zigbee User Manual

: October 30, 2023
: immax

Table of Contents

Immax NEO Smart Radiator Actuator Zigbee
Product Information
Product Display and Buttons
Product Installation and Initial Commissioning
Product Special Function Description
Product Usage Instructions
PRODUCT SPECIFICATIONS
DISPLAYS AND BUTTONS
INSTALLATION AND INITIAL COMMISSIONING
SPECIAL FUNCTION DESCRIPTION
CONNECTOR COMPATIBILITY
Safety information
Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Immax NEO Smart Radiator Actuator Zigbee

Product Information

Immax NEO Smart Radiator Actuator Zigbee

The Immax NEO Smart Radiator Actuator Zigbee is a smart home device that allows you to control the temperature of your room. It connects to a Zigbee gateway and can be controlled through the Immax NEO PRO app, available for download from Google Play and the App Store. The device has advanced settings that can be accessed through a password (123456).

Product Display and Buttons

The device has two buttons (A and B) and displays various icons and information:

A: Displays Auto Mode, Manual Mode, Energy Saving Mode, Low Battery, Children Lock, Boost Mode, Open Window Function, Comfort Mode, Auto Mode Period, Holiday Mode, Room Temperature, and Time Setting.
B: Displays Zigbee Connection Status, Set Temperature/Advanced Options, Valve Status, and Keys Rotation.

Product Installation and Initial Commissioning

After powering on the device, the screen will show “all” for 3 seconds. To set the time, press the button for time setting, and turn the rotation to adjust the value for hour, minute, and week. Press the button again to confirm the setting and remember the time. To start the system self-check, press the button for self-check. If there is a fault prompt during self-check, handle the fault before proceeding.

Product Special Function Description

The device has special functions that can be accessed through advanced settings:

Holiday Mode: To activate holiday mode, press and hold button A for 3 seconds to access advanced settings, and choose holiday mode. Then set the temperature and days using short presses and the rotation. To exit holiday mode, press button A.
Open Window Function: The device turns off the window opening function by default, but it can be turned on in advanced option 2 setting [reset disable when changing the battery].
Comfort Mode and Energy Saving Mode: To switch between comfort mode and energy saving mode, press button B. To enter the comfort mode parameter setting, press and hold button B for 3 seconds, and turn the rotation to adjust the value.

Product Usage Instructions

Immax NEO Smart Radiator Actuator Zigbee

To use the Immax NEO Smart Radiator Actuator Zigbee, follow these steps:

Download the Immax NEO PRO app from Google Play or the App Store or load the attached QR code.
After the Zigbee gateway is configured, enter the gateway to add sub-devices, and wait for the actuator to be powered on and the system self-check is completed.
To activate flashing access network connected mode, long press button A and B. Please refer to the gateway manual for Zigbee gateway configuration.
To switch between manual mode and auto mode, short press button B. To enter advanced setting, long press button B for 3 seconds.
To switch between comfort mode and energy saving mode, short press button B. To enter comfort mode parameter setting, long press button B for 3 seconds and turn the rotation to adjust the value.
To start the BOOST function and turn on the BOOST fast heating mode, long press button A for 3 seconds. To exit this function and return to the previous mode, short press any key during operation.
To lock/unlock keys, long press button A for 3 seconds.
To set the time, press button A for time setting, and turn the rotation to adjust the value for hour, minute, and week. Press the button again to confirm the setting and remember the time.
To activate holiday mode, press and hold button A for 3 seconds to access advanced settings, and choose holiday mode. Then set the temperature and days using short presses and the rotation. To exit holiday mode, press button A.
The device turns off the window opening function by default, but it can be turned on in advanced option 2 setting [reset disable when changing the battery].

PRODUCT SPECIFICATIONS

Power supply: 2 x AA 1,5V, alkaline batteries
Temperature measurement accuracy: + – 0,5ºC
Sensor: NTC (10k) 1%
Max. extension: 4,5 mm
Temperature setting range: 5 – 35ºC
Working temperature: -10 – 60ºC
Size (mm): 53* 89,5 mm
Temperature display range: 1 – 70ºC
Thread Size: M30 * 1,5
Protocol: Zigbee
Frequency: 2400MHz – 2483.5MHz
Maximum RF output power: 10dBm – max 19dBm

Download the „Immax NEO PRO“ app from Google Play and the App Store or load the attached QR code

Advanced function setting password: 123456

After the ZigBee gateway is configured, enter the gateway to add sub-devices, and wait for the actuator to be powered on and the system self-check is completed.
Long press and to activate flashing access network connected mode. Please refer to the gateway manual for Zigbee gateway configuration.

DISPLAYS AND BUTTONS

keys	Represent

Short press to switch manual mode and auto mode 2.Long press to enter advanced setting

|

Short press to switch between comfort mode and energy saving mode
Long press for 3 seconds to view valve open status

|

Long press 3 seconds to start the BOOST function; turn on the BOOST fast heating mode, short press any key during operation to exit this function and return to the previous mode
When setting other functions, short press is the confirmation
Long press for 3 seconds to lock/unlock keys

Rotation|

Clockwise, the value increases
Counterclockwise, the value decreases

INSTALLATION AND INITIAL COMMISSIONING

After power on, the screen will show all for 3 seconds.|
---|---
Time setting: when flashing then press enter hour setting, turn the rotation to adjust the value, press again enter minute setting, turn the rotation to adjust the value, press again to set week, turn the rotation to adjust the value, press to confirm setting and remember time.

Note: after the actuator completes its self-check, under normal working status, if need to modify time, long press 3s access to advanced setting. And press to choose , short press enter time setting, the same as above method.

|

When display „Ad“, press Start system self-check, when

display „1“, this is the first step of system self-check. When display „2“, this is the second step for self-check, after finish self-check, if there is no fault prompt, it will enter the normal

working state. If there is a fault prompt, please handle the fault first, otherwise it will not enter the normal working state.

|
E1 Motor fault
E2 Sensor fault
Flashing slow low battery

SPECIAL FUNCTION DESCRIPTION

AUTO MODE SETTING

Long press about 3s access to advanced setting, short press switch to auto mode setting short press access to auto mode setting , short press to choose which item you want. First set the auto mode to 5 means: 5=5+2 days, 6=6+1 days, 7= 7 days, after pressing to access to hour or minute setting, short press again access to temperature setting, turn the rotation to adjust value, short press choose: hour, minute, time period, and turn the rotation to adjust value, finished setting, about 10 seconds will automatically save and exit.

Period	Default period	Default temperature
1	6:00	20°C
2	8:00	15°C
3	11:30	15°C
4	12:30	15°C
5	17:30	20°C
6	22:00	15°C

CONNECTOR COMPATIBILITY

ADVANCED OPTIONS

Press for 3-5s to access to advanced setting, short press to select the advanced option parameter setting icon SET , short press to enter advanced option parameter setting, turn the rotation to adjust value, after each parameter is set, short press to enter the next option setting, all after the setting is completed, the key is not operated for 10 seconds, the parameters are saved and the setting is exited.

No.	Item	Setting parameters	Default
1	Correction of the measured

temperature

| -9-+9°C (Displayed as the corrected room temperature value)| -1°C
2| Open window function parameter: temperature and running time| 1: display – – means disable open window function, rotating the knob clockwise display 5°C means this function enable (temperature setting range: 5-25°C)

2: Running time: 5-60min (after

enable function, press change setting)

| – –
3| Automatic lock if no operation more than 10

minutes

| 0: Disable

1: Enable

| 0
4| Setting temperature

minimum limit

| 1-15°C| 5°C
5| Setting temperature

maximum limit

| 16-70°C| 35°C
6| BOOST mode running time| 100s-900s, Steps of 100 seconds| 300
7| Start/stop working temperature difference

setting

| 0,5-1,5| 1
8| Control type of valve| 0: PID 1:ON/OFF| 0
9| Reset| Display 88, turn the knob clockwise or counterclockwise to change to 00,

press to reset, the screen will be fully displayed for 2 seconds.

|
10| Valve Seal Type| 0: Soft Seal

1: Hard Seal

| 0
A| Control type of valve| 0: PID

1: ON/OFF

| 0

Safety information

CAUTION: Keep out of reach of children. This product contains small parts, which may cause suffocation or injury if swallowed.
WARNING: Every battery has the potential to leak harmful chemicals that can damage skin, clothing or area where the battery is stored. To avoid the risk of injury, do not allow any substance from the battery to come into contact with the eyes or skin. Every battery may burst or even explode if exposed to fire or other forms of excessive heat. Take care when handling the batteries. To reduce the risk of injury from mishandling the batteries, take the following instructions:
- Do not use different brands and types of batteries in the same device
- When replacing the batteries, always replace all the batteries in the device
- Do not use rechargeable or reusable batteries
- Do not allow children to insert batteries without supervision
- Follow the battery manufacturer’s instructions for proper battery handling and disposal.
CAUTION: The product and batteries should be disposed of at a recycling center. Do not dispose of them with normal household waste.
CAUTION: To ensure safe use of the product, wires must be brought at the installation site according to valid regulations. The installation must only be carried out by an individual with the appropriate certification in the field of Electronics. During installation or when a fault is detected, the power cable must always be disconnected from the socket (in the case of direct connection, the relevant circuit breaker must be switched off). Improper installation can damage the product and cause injury.
CAUTION: Do not disassemble the product, electric shock may occur.
CAUTION: Use only the original power adapter provided with the product. Do not operate the device if the power cord shows signs of damage.
CAUTION: Follow the instructions in the enclosed manual.

Maintenance

Protect the device from contamination and soiling. Wipe the device with a soft cloth, do not use rough or coarse materials.
DO NOT USE solvents or other aggressive cleaners or chemicals.
A Declaration of Conformity has been issued for this product. More information can be found at www.immax.cz

Manufacturer and importer