Shenzhen Hongxin Netvision Digital Technology D3 Mini Projector Instruction Manual

June 5, 2024
Shenzhen Hongxin Netvision Digital Technology

Shenzhen Hongxin Netvision Digital Technology D3 Mini Projector

Warm Reminder

  • DO not switch on or operate the unit before you have read the instruction manual.
  • Please pull out the power plug from the wall plug if the projector overheats and smoke appears
  • Do not look into the lens directly – this can cause eye damage
  • Do not let children get close to the projector as they may look into the lens directly
  • Do not turn on the projector before connecting with other components
  • Do not attempt to repair the projector as this action will void the warranty;
  • Do not use the projector in a wet environment, do not place liquids on or close to the projector
  • Do not block the air inlet and ensure the projector is placed in a well ventilated location

Accessories

  • Projector:1 pc
  • Remote Contro I:1 pc 1
  • 9V DC Adaptor:lpc
  • Instruction Ma nua 1:lpc

Projector Overview

  1. Power Switch
  2. 19VDC in
  3. USB port
  4. HDMI in
  5. Indicator light
  6. Infrared receiving Window
  7. SPDIF in &3.5mm audio earphone in
  8. Lens Focus
  9. Projector Handle

Projector Top View

Shenzhen Hongxin Netvision Digital Technology D3 Mini Projector-
fig3

  1. Lens
  2. Shock pad*2
  3. Dual Channel Speaker
  4. Bracket Screw Hole
    Attention:
    Please do not look into the lens directly to avoid harm your eyes.

Remote control/Key Overview

  1. CD Power
  2. Volume+
  3.  Volume-
  4.  Up
  5. Left
  6. Right
  7. Down
  8. OK
  9. Home
  10. Return
  11. Menu
  12. Cursor
  13. Mute

Equipment connection Settings

Warning: To be safe, cut power between projector and relative equipment before connect cable.

  1. Turn on

  2. High-Version with battery in, long press the menu key to call up the projector.(The lower version do not have battery-in).

  3. If battery low, please use the mafchmg 19V DC adapter connect the projector DC in port for battery charging.

  4. The indicator light is on during the energizing. After pressing the power bottom.the indicator light flashes for several seconds and then goes out. The projector starts to work.

  5. Select the Channel for the Projector
    Projector should choose the correct channel when connected with different Device. Such as HDMI-IN.

  6. press the remote control channel key, which can bring up the channel menu from any interface. Use up and Down direction key for choosing channel.

  7. Press OK confirm the channel.

  8. Press the return key canceling the connection or press the channel key choosing other channel.

  9. Equipment connection Settings

  10. Connect with HDMI device
    Use HDMI cable to connect projector with HDMI device (such as computer,HD player, DVD and so on).

  11. Connect the USB
    Insert the USB into the projector,move icon on the main interface to corresponding options to open the video, audio, text, images and other documents.

  12. Connect the AV devices
    Prepare a 3in 13.5mm AV cable. The red, yellow and white end connected with the output end, while the 3.5mm end connect with the AV interface of the projector. Then enter to the AV input channel with the projector signal selection key.

Android Desk

  1. Overview
    Press the “power on” button, it will enter the -■ main interface after the “power on” logo appeared for a few seconds

    • Main interface review : Pre-installed Applications and downloaded applications
    • MiraCast: Enables android phones share the screen with the projector quickly.
    • Source: Select the HOM I signal
    • Browser: Connect USB flash drive to local play
    • Add App: Common applications can be added to the main interface
  2. All Apps
    Use the remote control to select all applications to view pre-install applications and downloaded applications.

  3. Pre-install application:

  *  **Local player:** connect the USB drive to play local audio, video and text.
  *  **HappyCast:** realize multi-screen interaction between mobile phones, computers and other electronic devices and the projector.
  *  **Aptoide TV :** watch all kinds of live TV.
  *  **Miracast:** fast screen sharing between mobile phone and projector.
  1. Local Player
    Connect the USB flash driver to the projector and open local player with the remote control, then select local disk, USB flash driver to open(videos, pictures, musics and all files), select the file you want to open, it will be lights around, then press OK to play, press the return key to exit.
    **Local Player support format as following:


Please open the WPS software to open the text file. l::23
Text files supported formats:** Word; DOC, DOCX, DOT. PPT: PPT, PPTX. EXCEL: XLS, XLT, XLSX

  1. Android Settings»System settings
    Press the left and right arrow keys of the remote control to move to the system Settings, press the up, down, left and right arrow keys to select the corresponding Settings, and press the OK key to enter the Settings.

  2. Network Settings
    At the main page, select settings-network settings-WIFI settings, press OK enter WIFI settings. Select the WIFI you want to connect, press OK enter settings, the password entry box will pop up, enter password to connect, and press the return key can exit the WLAN interface.

  3. Bluetooth Settings
    At the main page, select settings–+Bluetooth settings, press OK to turn on Bluetooth, choose the device to be paired, and then select the return key to exit.

  4. Application Settings
    At the main page, select settings–>APP, Press OK to enter the application Settings interface and select the corresponding application for opening/uninstalling operations.

Shenzhen Hongxin Netvision Digital Technology D3 Mini Projector-
fig13

4.  **Language settings**
  *  **Language settings:** At the main page, select setting –> Language settings, press ok enter language option to choose the language needed then press enter.
  *  **Input Method:** At the main page, select setting ->Input Method, choose system input or downloaded input.
  *  **Android keyboard Setting:** At the main page, select setting –>Android keyboard Setting:, can choose sound on keypress and auto capitalize the first of each sentence.

5.  **Date Setting**  

At the main page, select setting ->Date Setting, press OK to enter date and time setting . Can choose Auto setting on (use the Internet access time); turn the Auto setting off if need set time manually,

6.  **Other Setting**  

Boot Source Option: At the mainpage , select – other setting , then select boot source on or off,can choose to enter desktop or othersources.Power On Option : Select standby /power on when connect power

7.  **Projection Setting**  

Projection Mode:

  * At the main page, select setting- Projection Image Setting, can choose Front projection /rear projection/upside down front projection upside down rear projection.
  * Keystone correction: At the main page, select setting- Projection Image Setting, when projector use to use keystone correction its need to turn on 4 sides(left right up or down) keystone correction to adjust image to normal. 4 sides keystone correction through digital technology to make the projected image normalization.
  * 4 sides keystone correction user guide: Enter into manual keystone press the direction key to select the point need to be adjusted,press the confirm key to determine the selection point, after confirming the selection point, use the direction key to adjust the appropriate parameters After adjustment, press OK to cancel the selection poir and use the arrow key to move to the remaining points that need to be adjusted. The operation mode is the same as above. Press menu key to reset quickly.

8.  **System Update**  

At the main page, select setting —-> System Update, Flash memory disk can be used to upgrade the local U disk upgrade, select Restore Factory can make projector restore back to factory status.

9.  **System info**  

At the main page.Select Settings—->System info.Can view the device name, system version, memory information, ROM capacity and other information.

Shenzhen Hongxin Netvision Digital Technology D3 Mini Projector-
fig19

10.  **Projection Screen

**

External channel {OSD) Setting

After the projector is connected to an external device such as HDMI, the menu function can be called by long press the menu key to adjust the sound and image.” If you want to to adjust the Settings menu,

please perform the following steps:

  1. Press menu key to enter the OSD menu and then press the direction key ◄or►choose the menu need to setting.
  2. Press direction key UP. or DOWN , choose the item need to adjust and then press OK to enter.
  3. Press direction key ◄or► set parameters.
  4. Press return key to save setting.

Shenzhen Hongxin Netvision Digital Technology D3 Mini Projector-
fig21

Main menu function:

Projection distance and Screen Size

Image Size (Inch) Projection Screen L+W ( cm) Lens-Screen (M)
40 0.91*0.5 1.1
50 1.13*0.62 1.36
60 1.36*0.75 1.62
70 1.57*0.86 1.85
80 1.78*0.98 2.09
90 2.0*l.11 2.32
100 2.20*1.2 2.53

480P/1080P Projection distance and Screen Size

Disclalmer

FCC Warning

Shenzhen Hongxin Netvision Digital Technology D3 Mini Projector-
fig24

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals