immax Neo Lite Smart Home Devices User Manual
- June 3, 2024
- immax
Table of Contents
Smart Home Devices
User Manual
PRODUCT DESCRIPTION
Say goodbye to use remote controls for each of the IR home appliances such as TV, Air-conditioner , TV box, light, Fan, Audio, etc. You can remotely control these devices with the tap of your finger on the mobile App, Also you can real-time monitor the temperature and humidity on App at anytime and anywhere.
TECHNICAL SPECIFICATIONS:
Color: black
Protocol: WiFi
Frequency: 2400 MHz~2483.5 MHz
Maximum RF output power: WiFi: 20 dBm
IR frequency: 38 KHz
IR range: ≤ 12 meters
Humidity detection range: 0-90% RH
Temperature detection range: 0 – +60°C
Material: plastic
Degree of protection: IP 20
Power supply: DC 5V / 1A
Dimensions: 60 x 60 x 20 mm
DOWNLOAD IMMAX NEO PRO AND REGISTRATION
Scan the QR code and download the Immax NEO PRO application.
https://smartapp.tuya.com/immaxneosmart
Or find and install the Immax NEO PRO app in the App Store or Google Play.
- Launch the Immax NEO PRO application and click on “Register” and create your own account.
- If you have finished registration, log in to your account.
PAIRING THE PRODUCT INTO THE APPLICATION
Preparation jobs: Power on the IR and enter the home of APP, please make sure
your mobile and the smart kits are connected to the same WiFi.
Possibility to add via Bluetooth
Connect your mobile to your WiFi router , supply power to the remote control
with Micro charging cable, click“+” in the upper right corner of homepage or
click “Add Device” .
Turn on the Bluetooth in mobile: The app will ask you to turn on the Bluetooth
in your mobile, then you choose the device to add. enter into your WiFi name
and WiFi password, it will connect the network automatically.
Do not turn on the Bluetooth
Select ”Universal Remote Control ” from“Others”, enter into the WiFi password
make sure the LED indicator is blinking rapidly, if not, please hold the reset
but for about 5s till indicator blink quickly. it will connect automatically.
If your WiFi router open both 2.4 GHz and 5 GHz with the same name, enter WiFi
password, please select “AP Mode”, hold the reset button for about 5 seconds
till LED indicator blink slowly, connect your
mobile to the device’s hotspot: “Smart Life-XXXX”, then click to return to App
interface, it will connect to WiFi router automatically,configuration
complete.
ADDING A CONTROLLED DEVICE
Tap “Smart IR”, then click ”Add ”, select the device and its brand you need control, you can click “Quick Match” or “ Manual Mode” to match the buttons, please match at least 3 buttons to check if the device reacts properly, if yes, then match completed, you can control the device. If you added the same device type with the same brand in one room, please edit the device with different names to avoid control confusion.
If you can not find the brand of the device in the brand list, you can choose “DIY” to learn the buttons of other brands’ remote control, so you can also control the device.
Safety Information
CAUTION: Keep out of reach of children. This product contains small
parts, which may cause suffocation or injury if swallowed.
WARNING: Every battery has the potential to leak harmful chemicals that
can damage skin, clothing or area where the battery is stored. To avoid the
risk of injury, do not allow any substance from the battery to come into
contact with the eyes or skin. Every battery may burst or even explode if
exposed to fire or other forms of excessive heat. Take care when handling the
batteries. To reduce the risk of injury from mishandling the batteries, take
the following precautions:
- Do not use different brands and types of batteries in the same device
- When replacing the batteries, always replace all the batteries in the device
- Do not use rechargeable or reusable batteries.
- Do not allow children to insert batteries without supervision.
- Follow the battery manufacturer’s instructions for proper battery handling and disposal.
CAUTION: The product and batteries should be disposed of at a recycling
centre. Do not dispose of them with normal household waste.
CAUTION: To ensure safe use of the product, wires must be brought at the
installation site according to valid regulations. The installation must only
be carried out by an individual with the appropriate certification in the
field of electronics. During installation or when a fault is detected, the
power cable must always be disconnected from the socket (in the case of direct
connection, the relevant circuit breaker must be switched off). Improper
installation can damage the product and cause injury.
CAUTION: Do not disassemble the product, electric shock may occur.
CAUTION: Use only the original power adapter provided with the product.
Do not operate the device if the power cord shows signs of damage.
CAUTION: Follow the instructions in the enclosed manual.
Maintenance
Protect the device from contamination and soiling. Wipe the device with a soft
cloth, do not use rough or coarse materials.
DO NOT USE solvents or other aggressive cleaners or chemicals.
A Declaration of Conformity has been issued for this product. More information
can be found at www.immax.cz
Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU
www.immaxneo.cz
www.immaxneo.com
Made in P.R.C.
Documents / Resources
|
immax Neo Lite Smart Home
Devices
[pdf] User Manual
Neo Lite Smart Home Devices, Neo Lite Devices, Smart Home Devices, Devices
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>