SIEMENS SN73HX10VG Fully Integrated Dishwasher User Guide
- June 16, 2024
- SIEMENS
Table of Contents
- SIEMENS SN73HX10VG Fully Integrated Dishwasher User Guide
- Setting up Home Connect
- Overview of water hardness settings
- Setting the water softening system
- Programmes
- How to use your appliance
- Cleaning filters
- Cleaning spray arms
- Clean wastewater pump
- Troubleshooting
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SIEMENS SN73HX10VG Fully Integrated Dishwasher User Guide
Before using for the first time, read the instruction manual and the safety information it contains.
Setting up Home Connect
Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app.
- Install the Home Connect app on your mobile device and follow the instructions.
- Scan the QR code with the Home Connect app.
Overview of water hardness settings
You can find an overview of the water hardness values that can be selected
here.
A table of country-specific units can be found in the instruction manual.
Setting the water softening system
Programmes
The programme data has been measured in the laboratory according to European
standard EN 60436.
The consumption figures depend on the programme and additional function
selected.
The running time will change if the rinse aid system is switched off or rinse aid needs to be added.
How to use your appliance
-
Load the tableware.
Only clean tableware that is suitable for dishwashers.
Remove large remnants of food from the tableware. Check that the spray arms can rotate freely. -
Add detergent.
-
Switch on the appliance .
-
Select the programme.
-
Start the programme .
-
Remove the tableware at the end of the programme.
-
To cancel the programme, press Reset 4 sec for approx. 4 seconds.
The programme is cancelled and ends after approx. 1 minute.
Cleaning filters
Cleaning spray arms
Clean wastewater pump
Troubleshooting
Read More About This Manual & Download PDF: