iZEEKER iD220 Dash Cam Front and Rear User Manual
- June 12, 2024
- iZEEKER
Table of Contents
iD220 Dash Cam Front and Rear
User Manual
Warranty
Thank you for purchasing the iD220 Dual Dash Cam. This product carries a one-
year warranty from the purchase date.
If you have any issues, questions, or concerns about the product, please do
not hesitate to contact us. Please see the quick guide and box for our contact
details.
support@izeeker.co
Product Description
Package Contents 
- Dash Cam
- Suction Mount
- 3M Adhesive Mount (for rear camera)
- 2 Screws
- Micro USB Cable
- Car Charger
- Rear Camera with Cable Kit
Camera Overview
- Power Port
- Mounting Groove
- Microphone
- Rear Camera Interface
- MicroSD Card Slot
- Reset
- Up
- Menu/Mode
- Down
- OK/Power
- LED Indicator
- Display Screen
- Camera Lens
- Speaker
- Rear Camera Lens
- Tapped Hole
- 3M Mount
Button & Interface Description
| Button & Interface | Description |
|---|---|
| Power Port | Connect the dash cam with the car charger while driving. Connnect |
to your computer with a usb cable while watching playback.
Mounting Groove| Attach mount to camera
Reset| Insert a reset pin into the R hole to restart the machine under
abnormal conditions.
Rear Camera Interface| Connect the rear camera.
MicroSD Card Slot| Insert a Class 10 microSD card with a capacity of 32GB-
128GB.
Up| Press to navigate up within menus
Menu/Mode| Short press to access the camera menu and system menu. Long press
to toggle video recording model, photo mode, or video playback mode.
Down| Press to navigate down within menus.
OK/Power| Short press to confirm,
long press to turn on/off the camera.
Microphone| Toggle audio recording
Display Screen| 2.0″ TFT Display
LED Indicator| Solid Red: Charging battery Flashing red light: Video recording
Camera Lens| 170° wide angle for optimum picture quality
Speaker| For audio playback directly from the camera
Product Description
Insert Memory Card For reliable operation, please use a Class 10 Micro
SD/TF card with a capacity of 32-128GB.
- Insert a microSD card into the memory card slot located at the left side of the LCD screen. Align the MicroSD card as shown in the picture below. (Electrical contacts of the microSD card should be facing the LCD display side of the camera, with the notches of microSD card facing up.) When the memory card is successfully inserted, you will hear a ‘clicking’ sound.
- To remove the MicroSD card, gently push its top edge inward until it clicks. It will pop up and can be removed.
Tips:
- The microSD card must be formatted when first used.
- For a 64GB/128GB card, please use a computer to format it with FAT32 file system before using.
- It’s recommended to format the card regularly.
Attach Mount to Camera
- Align the mount with the mounting groove located at the top of the camera, slot into the groove, and slide it to the left.
Remove Lens Protection Film
- Before installing the camera onto the windshield, remove the protection film from the camera lens.
Product Installation
- Clean the windshield using water or alcohol, and wipe clean with a lint-free cloth. Install the suction mount to the windshield, and rotate the locking bar on the mount upward 90 degrees till it clicks, then mount the camera on the windshield securely.
- Connect the Micro USB cable end of the charging cable to the camera. Carefully route the power cable around the windshield and tuck the wire under the trim. When complete, insert the Car Charger into your vehicle’s cigarette lighter port.
- Please follow the instructions below. Install the rear camera in the correct direction.
- In order to avoid damage to the dash cam, we suggest that you ask a professional to install it for you.
Operation Instructions
Powering On / Off
Automatic:
The camera is designed to automatically power on when it receives power. A
start-up sound will be played when the camera has started successfully. When
the camera is ON, simply turn OFF the engine or unplug the power cable and the
camera will switch OFF automatically.
Manual:
Switching the camera OFF manually is required for vehicles where the vehicle’s
power socket provides continuous power after the engine is turned OFF. To turn
the power off manually, press and hold the power button for at least 3
seconds. A countdown will display on the screen. Press and hold the power
button until the camera is powered off. To turn the camera on manually, press
and hold the power button for at least 3 seconds.
Mode Switches
Long press the mode (menu) button to toggle video recording mode, photo mode,
video playback mode.
Video Feature Menu
Press the menu button once on video recording mode
System Menu
Press the button twice
Product Specifications
| Display | 2.0″ TFT-LCD |
|---|---|
| Lens | 650NM lens |
| Angle | 170° |
| F/No. | 2. |
| Record Method | Loop Recording / Motion Detection |
| Files Format | MOV |
| Video Encoding | H.264 |
| Video Resolution | 1920×1080, 1280×720, 640×480 |
| Camera Resolution | 4032×3024, 3648×2736, 3264×2448, 2592×1944, 2048×1536, |
1920×1080, 1280×960, 640×480
Seamless Video| Yes
Operating Temperature| -4°F-140°F
FAQ
A: The dash cam iD220 supports a 32-128GB Micro SD card, Class 10 or above. To let your dashcam work smoothly, for 64-128GB SD card, the new SD card better to be formatted to FAT32 on the computer and on the dashcam before first use.
Q: The camera automatically shuts down after one-minute-recording. What should I do?
A: The screensaver's defalt setting is to turn the screen off after one minute. As long as the red light flashing, the recording is still continuing. You can turn off the screensaver.
Q: How can I make it record when I park my car?
A: Please prepare a Micro-port hardwire kit to keep a continuous power apply, then it will work while the car is off and parked.
Q: When driving, the camera will beep and show a headlight symbol on the screen. What does it mean and how to do?
Q: Can I playback the video on the dash cam?
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>