IMOU DB60 5MP WiFi Video Doorbell User Guide
- June 9, 2024
- imou
Table of Contents
Doorbell Chime
Quick Start Guide
V1.0.0T2.00250635
https://en.imoulife.com
DB60 5MP WiFi Video Doorbell
Welcome
Thank you for choosing IMOU.
We are devoted to providing you easy smart home products. If you have problems
using the product, please contact our service team at
service.global@imoulife.com.
Package Contents
| |
---|---|---
Doorbell Chime ×1
| Power Pin ×1|
Quick Start Guide ×1
Overview
Front View
LED Status | Device Status |
---|---|
Solid green | – Operating correctly |
– Setup successful
Flashing green| Ready to set up the device
Solid red| – Booting/Restarting
– Resetting to factory default
Flashing red| Network disconnected
Flashing green and red| Updating firmware
Off| Power disconnected
Back View
|
Side View
---|---
|
How to reset the chime
Press and hold the reset button for 10 s until the LED turns solid red.
Function of the QR code
Scan the QR code with Imou Life App to add the device to your account.
Please keep it well for future use.
Installation
Step 1
Place the power pin onto the rear side of the chime, and then press it down to
fit the two parts together.
Step 2
Slide the power pin upwards to secure it. A click sound will indicate that it
is locked in.
Step 3 (optional)
Install the video doorbell. For details, please refer to the doorbell guide.
Step 4
Plug your chime into the power outlet where you can hear the ringtone easily,
such as the hallway. It is recommended that the chime is located between the
Wi-Fi router and the doorbell. Place them as close to each other as possible
for optimal performance.
How to detach the power pin from the chime
Press the release button and meanwhile slide down the power pin to remove it.
Set Up the Device
Scan the QR code below, search for “Imou Life” in the app store, or navigate to Support > Download Center in our official website to download and install the app.
**** If you already use the app, make sure that you are using the latest
version.
To ensure the best possible wireless performance, please make sure there are
no obstacles and electromagnetic interference between the device and the
router.
The app will guide you through the setup process.
**** Please link the chime to your doorbell on the device setting page of the doorbell; otherwise, your chime will not respond to the doorbell.
Troubleshooting
Q: Failed to set up the device.****
– Ensure your smart phone and the device are within range of your Wi-Fi router
(recommended to be no more than 5 m/16 ft). If the location where the chime is
installed has a weak signal, consider adding a Wi-Fi extender between your
router and the chime.
– Ensure the LED on the device is flashing green before setup.
– Reset the device, and then set it up again.
Q: The chime does not ring after I press the doorbell.****
– Ensure the chime has been linked to the doorbell. On the device setting page
of the doorbell, tap Link Chime, select the correct chime type, and then
follow on-screen instructions.
– Ensure the chime is online and Audio Alert toggles on. On the device setting
page of the chime, tap Chime Sound to find Audio Alert.
– If Snooze Alert (in Chime Sound) toggles on, the chime ringing within the
snooze schedule will be silenced.
Q: How to pair the doorbell to the chime?****
– After setting up the chime, on its setting page, tap Quick Setup, and then
follow on-screen instructions.
– Switch the WLAN of the doorbell to the one from the chime.
Q: My chime has been linked to the doorbell, but live streaming of the doorbell lags or stutters.****
– Install the chime between the doorbell and the router, such as the hallway.
– Check if your network is stable and at least 2 Mbps of the bandwidth is
required.
Q: The device is offine.****
– If the LED is flashing red, check whether the router can connect to the Internet. If the network is connected, restart the device. If the device is still offine, reset it.
Q: How to update the firmware?****
You can update the firmware through the “Imou Life” app in Devices Settings > Firmware. It shows a red dot when an update is available. The chime will restart automatically when it finishes update.
For more questions, please scan the QR code or visit: https://en.imoulife.com/support/help
http://www.imoulife.com/web/support/help
** @imouglobal
service.global@imoulife.com
https://en.imoulife.com
**
Documents / Resources
| IMOU
DB60 5MP WiFi Video
Doorbell
[pdf] User Guide
DB60 5MP WiFi Video Doorbell, DB60, 5MP WiFi Video Doorbell, WiFi Video
Doorbell, Video Doorbell, Doorbell
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>