08499L Immax CLOVER-2 Outdoor Solar LED Instruction Manual
- June 1, 2024
- immax
Table of Contents
08499L Immax CLOVER-2 Outdoor Solar LED
Instruction Manual Immax CLOVER-2 outdoor solar
LED wall light with external solar panel
08499L
08499L Immax CLOVER-2 Outdoor Solar LED
Please read the manual carefully and follow the instructions.
PARAMETERS:
LED model: COB
Number of LEDs: 164
Warm LEDs Number: 83
Cold diodes count: 81
Light color: 6500K/3000K combination
Degree of protection: IP44
Operating temperature: -20°C – 60°C
Battery: 1200mAh 3,7V
Solar panel: 5.5V / 1.5W / 13.7 x 8cm
Detection distance: 3-7m
Lumens: max 350lm
Function: PIR motion sensor
Dimension: 21,6 x 22,5 x 9,5 cm
Charging time: 8-10hours in sunlight
Working time: 8-10 hours
Material : ABS + PC
Warranty : 2 years
MAINTENANCE:
Keep the solar panel clean.
Wipe with a damp soft cloth.
Avoid cleaning or abrasive products.
Package includes: solar panel, accessory kit, user manual
3 LIGHT MODES
Works in three selectable modes:
Mode 1 – automatic permanent switch-on after dark
Mode 2 – motion detection – max illumination for 15-25s – no detection motion,
the light is permanently dimmed
Mode 3 – motion detection – max. illumination for 15-25s – no detection
motion, the light is switched off
PRODUCT FEATURES
Unique wide-angle design, four light surfaces on swivel joints, can be
adjusted in different directions to provide the largest possible illumination
angle.
Easy to install and uses energy saving solar technology.
Wide use for lighting gardens, garages and other exposed areas sunlight.
Fully automated operation. Automatically switches off during the day and turns
off at night automatically lights up when it detects movement.
NOTICE
If the lights are not working properly
- Verify that the solar panel is exposed to sunlight for a sufficient period of time and that the battery is charged by solar power.
- Check that the direction of installation of the product is correct (solar panel facing upwards).
- Make sure that nothing obstructs the solar panels from sunlight.
- It is recommended that the product be fully charged when first used (24 hours in the sun)
- Sunny weather will result in longer shining time, foggy and rainy weather will result in shorter shining time.
- Please regularly clean the dust on the PV panel; Let the PV panel can receive the sunlight to the maximum extent, so that the product has a better lighting effect.
- Check whether the switch is on
- Check whether the sensor is within the range of the detected area
- Make sure the product is installed within 3_5meters
INSTALLATION MANUAL:
- Mark the installation location and make the holes.
- Push the plastic dowels into the holes.
- Screw the base to the wall.
- Place the luminaire on the base.
- After adjusting the angle, tighten the adjustment screw.
- Connect the solar panel to the wall luminaire by pressing the cable connectors together and screw in the lock nut.
- Follow steps 1-3 to install the bracket and fix the solar panel to the bracket using the fixing arm
- Select the desired mode by pressing the button on the back of the luminaire.
WPB CZ, s.r.o. Pochoir 703,
742 85 Versine, Czech Republic
www.immax.cz | www.immax.eu