TELTONIKA RUT260 Industrial LTE Router User Manual

June 17, 2024
teltonika

TELTONIKA-logo

TELTONIKA RUT260 Industrial LTE Router

TELTONIKA-RUT260-Industrial-LTE-Router-product

Product Information

Specifications

  • Mobile network-type LEDs
  • LAN port
  • WAN port
  • Power LED
  • SIM slot
  • LAN LED
  • WAN LED
  • Reset button
  • Wi-Fi antenna connector (RP-SMA female)
  • Mobile AUX antenna connector (SMA female)
  • Mobile MAIN antenna connector (SMA female)

Product Usage Instructions

Hardware Overview
The RUT260 features various hardware components including LAN and WAN ports, LED indicators for power, LAN, WAN, and mobile network types, as well as antenna connectors for Wi-Fi and mobile signal.

Features and Functions
The RUT260 offers a wide range of features including:

  • Mobile module status monitoring
  • SMS and USSD capabilities
  • Black/White list management
  • Wireless modes and security settings
  • Network routing and protocols support
  • VoIP passthrough and connection monitoring
  • Security features such as firewall, attack prevention, VLAN, and more
  • VPN support with OpenVPN and IPsec encryption methods

Wireless Configuration
Configure the wireless settings including Wi-Fi security, SSID/ESSID, number of users, and wireless hotspot functionalities according to your requirements.

Network Setup
Set up routing, network protocols, VoIP passthrough, DHCP, QoS, and other network-related configurations to ensure smooth operation.

Security Settings
Enhance security by configuring authentication methods, firewall rules, attack prevention measures, VLAN settings, web filtering, and access control policies.

VPN Configuration
Set up VPN connections using OpenVPN or IPsec with various encryption methods to secure your network communications.

FAQ

  • How can I reset the device to factory settings?
    To reset the RUT260 to factory settings, locate the reset button on the back of the device and press and hold it for at least 10 seconds until the LEDs flash. The device will then reboot with default settings.

  • How many simultaneous Wi-Fi connections does the RUT260 support?
    The RUT260 can support up to 50 simultaneous Wi-Fi connections.

  • What encryption methods are available for VPN connections?
    The RUT260 supports various encryption methods for VPN connections including DES-CBC, AES, RC2, and more. Refer to the datasheet for a full list of supported encryption methods.

HARDWARE

FRONT VIEW

TELTONIKA-RUT260-Industrial-LTE-Router-fig- \(1\)

BACK VIEW

TELTONIKA-RUT260-Industrial-LTE-Router-fig- \(2\)

POWER SOCKET PINOUT

TELTONIKA-RUT260-Industrial-LTE-Router-fig- \(3\)

FEATURES

MOBILE

  • Mobile module
    4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps

  • Status
    Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID

  • SMS
    SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

  • USSD
    Supports sending and reading Unstructured Supplementary Service Data messages

  • Black/White list
    Operator black/white list

  • Multiple PDN
    Possibility to use different PDNs for multiple network access and services

  • Band management
    Band lock, Used band status display

  • APN
    Auto APN

  • Bridge
    Direct connection (bridge) between mobile ISP and device on LAN

  • Passthrough
    Router assigns its mobile WAN IP address to another device on LAN

WIRELESS

  • Wireless mode
    IEEE 802.11b/g/n, Access Point (AP), Station (STA)

  • Wi-Fi security
    WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation

  • SSID/ESSID
    ESSID stealth mode

  • Wi-Fi users
    Up to 50 simultaneous connections

  • Wireless Hotspot
    Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes

  • Wireless mesh/roaming
    Fast roaming (802.11r)

ETHERNET

  • WAN
    1 x WAN port 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

  • LAN
    1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

NETWORK

  • Routing
    Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

  • Network protocols
    TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)

  • VoIP passthrough support
    H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

  • Connection monitoring
    Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

  • Firewall
    Port forward, traffic rules, custom rules

  • DHCP
    Static and dynamic IP allocation, DHCP Relay

  • QoS/Smart Queue Management (SQM)
    Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

  • DDNS
    Supported >25 service providers, others can be configured manually

  • Network backup
    Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

  • Load balancing
    Balance Internet traffic over multiple WAN connections

  • SSHFS
    Possibility to mount remote file system via SSH protocol

SECURITY

  • Authentication
    Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block

  • Firewall
    Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

  • Attack prevention
    DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

  • VLAN
    Port and tag-based VLAN separation

  • Mobile quota control
    Mobile data limit, customizable period, start time, warning limit, phone number

  • WEB filter
    Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

  • Access control
    Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

  • OpenVPN
    Multiple clients and a server can run simultaneously, 27 encryption methods

  • OpenVPN Encryption
    DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF- CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

  • IPsec
    IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

  • GRE
    GRE tunnel, GRE tunnel over IPsec support

  • PPTP, L2TP
    Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

  • Stunnel
    Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

  • DMVPN
    Method of building scalable IPsec VPNs

  • SSTP
    SSTP client instance support

  • ZeroTier
    ZeroTier VPN client support

  • WireGuard
    WireGuard VPN client and server support

  • Tinc
    Tinc offers encryption, authentication and compression in its tunnels. Client and server support.

OPC UA

  • Supported modes
    Client, Server (planned)

  • Supported connection types
    TCP

DNP3

  • Supported modes
    Station, Outstation

  • Supported connection types
    TCP

MODBUS

  • Supported modes
    Server, Client

  • Supported connection types
    TCP

  • Custom registers
    MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

  • Supported data formats
    8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

DATA TO SERVER

  • Protocol
    HTTP(S), MQTT, Azure MQTT

Modbus MQTT GATEWAY

  • Modbus MQTT Gateway
    Allows sending commands and receiving data from MODBUS Master through MQTT broker

MONITORING & MANAGEMENT

  • WEB UI
    HTTP/HTTPS, status, configuration, FW update, CLI, troubleshooting, event log, system log, kernel log

  • FOTA
    Firmware update from server, automatic notification

  • SSH
    SSH (v1, v2)

  • SMS
    SMS status, SMS configuration, send/read SMS via HTTP POST/GET

  • Call
    Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off

  • TR-069
    OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

  • MQTT
    MQTT Broker, MQTT publisher

  • SNMP
    SNMP (v1, v2, v3), SNMP Trap

  • JSON-RPC
    Management API over HTTP/HTTPS

  • MODBUS
    MODBUS TCP status/control

  • RMS
    Teltonika Remote Management System (RMS)

IoT PLATFORMS

  • Cloud of Things
    Allows monitoring of Device data, Mobile data, Network info, Availability

  • ThingWorx
    Allows monitoring of WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

  • Cumulocity
    Allows monitoring of Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

  • Azure IoT Hub
    Can send device IP, Number of bytes sent/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

SYSTEM CHARACTERISTICS

  • CPU
    Mediatek, 580 MHz, MIPS 24Kc

  • RAM
    128MB, DDR3

  • FLASH storage
    16 MB, SPI Flash

FIRMWARE/CONFIGURATION

  • WEB UI
    Update FW from file, check FW on server, configuration profiles, configuration backup, restore point

  • FOTA
    Update FW

  • RMS
    Update FW/configuration for multiple devices at once

  • Keep settings
    Update FW without losing current configuration

FIRMWARE CUSTOMIZATION

  • Operating system
    RutOS (OpenWrt based Linux OS)

  • Supported languages
    Busybox shell, Lua, C, C++, and Python, Java in Package manager

  • Development tools
    SDK package with build environment provided

INPUT/OUTPUT

  • Input
    1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high

  • Output
    1 x Digital Output, Open collector output, max output 30 V, 300 mA

  • Events
    Email, RMS, SMS

  • I/O juggler
    Allows to set certain I/O conditions to initiate an event

POWER

  • Connector
    4-pin industrial DC power socket

  • Input voltage range
    9 – 30 VDC, reverse polarity protection, voltage surge/transient protection

  • PoE (passive)
    Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 – 30 VDC

  • Power consumption
    < 2 W idle, < 6.5 W Max

PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)

  • Ethernet
    2 x RJ45 ports, 10/100 Mbps

  • I/O’s
    1 x Digital Input, 1 x Digital Output on 4-pin power connector

  • Status LEDs
    2 x Connection type status, 5 x Mobile connection strength, 1 x LAN status, 1 x WAN status, 1 x Power

  • SIM
    1 x SIM slot (Mini-SIM – 2FF), 1.8 V/3 V, external SIM holder, eSIM (Optional)

  • Power
    1 x 4-pin power connector

  • Antennas
    2 x SMA for LTE, 1 x RP-SMA for Wi-Fi

  • Reset
    Reboot/User default reset/Factory reset button

PHYSICAL SPECIFICATION

  • Casing material
    Aluminum housing, plastic panels

  • Dimensions (W x H x D)
    83 x 25 x 74 mm

  • Weight
    130 g

  • Mounting options
    DIN rail, flat surface placement

OPERATING ENVIRONMENT

  • Operating temperature
    -40 °C to 75 °C

  • Operating humidity
    10% to 90% non-condensing

  • Ingress Protection Rating
    IP30

REGULATORY & TYPE APPROVALS

  • Regulatory
    CE/RED, UKCA, UCRF, RCM, EAC, WEEE

WHAT’S IN THE BOX

**STANDARD PACKAGE CONTAINS***

  • Router RUT260
  • 9 W PSU
  • 2 x LTE antennas (swivel, SMA male)
  • 1 x Wi-Fi antenna (swivel, RP-SMA male)
  • Ethernet cable (1.5 m)
  • SIM Adapter kit
  • QSG (Quick Start Guide)
  • Packaging box

TELTONIKA-RUT260-Industrial-LTE-Router-fig- \(4\) TELTONIKA-RUT260-Industrial-LTE-Router-fig- \(5\)

For all standard order codes standard package contents are the same, except for PSU.

STANDARD ORDER CODES

  • PRODUCT CODE
    RUT260000000

  • HS CODE
    851762

  • HTS CODE
    8517.62.00

  • PACKAGE CONTAINS
    Standard package with Euro PSU

For more information on all available packaging options – please contact us directly.

AVAILABLE VERSIONS

  • PRODUCT CODE
    RUT260 0*****

  • REGION (OPERATOR)
    Europe1, the Middle East, Africa, Australia, New Zealand

  • FREQUENCY

    • 4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28, B32
    • 4G (LTE-TDD): B38, B39, B40, B41, B42, B43
    • 3G: B1, B3, B5

The price and lead times for region (operator) specific versions may vary. For more information please contact us.

  1. Regional availability – excluding Russia & Belarus.

RUT260 SPATIAL MEASUREMENTS & WEIGHT

MAIN MEASUREMENTS

W x H x D dimensions for RUT260:

  • Device housing*: 83 x 25 x 74 mm
  • Box: 173 x 71 x 148 mm

Housing measurements are presented without antenna connectors and screws; for measurements of other device elements look to the sections below.

TOP VIEW
The figure below depicts the measurements of RUT260 and its components as seen from the top:

TELTONIKA-RUT260-Industrial-LTE-Router-fig- \(6\)

RIGHT VIEW
The figure below depicts the measurements of RUT260 and its components as seen from the right side:

TELTONIKA-RUT260-Industrial-LTE-Router-fig- \(7\)

FRONT VIEW
The figure below depicts the measurements of RUT260 and its components as seen from the front panel side:

TELTONIKA-RUT260-Industrial-LTE-Router-fig- \(8\)

REAR VIEW
The figure below depicts the measurements of RUT260 and its components as seen from the back panel side:

TELTONIKA-RUT260-Industrial-LTE-Router-fig- \(9\)

MOUNTING SPACE REQUIREMENTS
The figure below depicts an approximation of the device’s dimensions when cables and antennas are attached:

TELTONIKA-RUT260-Industrial-LTE-Router-fig- \(10\)

DIN RAIL
The scheme below depicts protrusion measurements of an attached DIN Rail:

TELTONIKA-RUT260-Industrial-LTE-Router-fig- \(11\)

Copyright © 2023, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals