Adexa HRQ911 Gas Solid Top With Gas Oven Instruction Manual

Adexa HRQ911 Gas Solid Top With Gas Oven

Product Information

Specifications

• Name: Gas Solid Top with Gas Oven
• Model: Not specified
• Size: Not specified
• Intratracheal size: Not specified
• Gas flow rate (m3/h): 0.25 (Based on the standard condition of 15 bottled)
• Use gas: Liquefied petroleum gas, natural gas
• Use pressure valve: Low pressure regulating valve P0.05Mpa (Low pressure)
• Combustion value (kcal/h): 6297

Product Usage Instructions

General Matters

• Read and follow the instructions carefully.
• Operate the machine only if you are skilled in its use.
• Turn off the machine and cut off the gas source when not in use or when the operator is absent.
• Installation, initial use, and maintenance should be done by professionals or qualified individuals.

Installation Instructions

• Name: Gas Solid Top with Gas Oven
• Model: Not specified
• Size: Not specified
• Intratracheal size: Not specified
• Gas flow rate (m3/h): 0.25 (Based on the standard condition of 15 bottled)
• Use gas: Liquefied petroleum gas, natural gas
• Use pressure valve: Low pressure regulating valve P0.05Mpa (Low pressure)
• Combustion value (kcal/h): 6297

Gas Fuel Classification

The basic characteristics of fuel gas are divided into four categories by the fuel gas acquisition method:

1. Natural gas (pipeline gas) – 2000Pa
   • Gas well gas
   • Associated (-dissolved) gas
   • Mine drainage gas
2. Artificial gas (pipeline gas) – 1000~1200Pa

Frequently Asked Questions (FAQ)

Q: Can this product be used for residential purposes?

• A: No, this product is designed for commercial use only.

Q: How should I clean the machine?

• A: Do not rinse directly with water. Clean the stainless steel surface regularly and properly to prevent surface oxidation and chemical damage to the machine.
• To give full play to the performance of this product and reduce unnecessary losses and damage, please read the product manual carefully before use, and keep it properly for future reference.
• This product is characterized by high technical content, novel design, complete functions, convenient operation, energy saving and environmental protection, etc., which is a more advanced gas combined furnace in China.

warn

• Any modification, and incorrect installation, adjustment, repair, or maintenance may result in property damage or casualties if the adjustment or repair should be contacted with the supplier and conducted by a trained professional.
• For your safety, please do not store or use flammable and explosive gases, liquids, or articles near this product

General matters

• When installing and repairing, please carefully follow the following steps to ensure the safe use of the machine.
• Keep the instructions safe from future doubt or left to the next operator.
• This machine can only be operated by personnel skilled in this machine.
• When the machine is not used or when the operator is absent, it is necessary to turn off the machine and cut off the gas source to avoid danger.
• The installation, initial use, and maintenance of the furnace shall be performed by professionals or qualified persons or those who have obtained the installation operation certificate, or a concession approved by the manufacturer.
• Remove the outer packaging, and ensure the integrity of the machine, if you have any questions, please do not use the machine, and ask experts to consult, do not put the packaging materials, in a place where children can get, them so as not to avoid danger (materials are plastic bags, nails, etc.)
• Repair should be repaired by the professional maintenance center personnel, and use the original accessories. If the above requirements are not followed, the safety performance of the machine may be endangered.
• This machine is used for commercial use and is not suitable for other uses, otherwise, it will cause danger.
• The installation of the machine must be conducted by a professional according to the instructions provided by the manufacturer.
• Do not rinse directly with water.
• Clean the stainless steel surface regularly and properly to prevent surface oxidation and chemical damage to the machine.

Installation instructions

General parameters Technical parameters

attached list of Gas fuel classification

The basic characteristics of fuel gas are divided into four categories by the fuel gas acquisition method

1. Natural gas (pipeline gas) 2000Pa

（1）gas well gas        （2）associated(-dissolved) gas       （3）mine drainage gas

2. Artificial gas (pipeline gas) 1000~1200Pa

（1）gas well gas       （2）associated(-dissolved) gas       （3）mine drainage gas

3. Oil to gas (pipeline gas) 2000Pa

（1）Heat storage and pyrolysis gas（2）Heat-storage and catalytic cracking gas （3）Pressure cracking gas

4. LPG, bottled gas, 3000Pa
The above data are the industry standards for reference

• Note: The gas and gas pressure used in different regions are also different, please use the local gas pressure standard.

Gas, nozzle, and conversion

• The gas and pressure are different in different regions.
• Please convert the nozzle according to the local gas pressure.

Note: This data is only for reference purposes, not for standard data.

Schematic diagram of the structure

Installation requirements and matters needing attention

• All installations and operations must be carried out by qualified persons as required.

Installation requirements

• Because the machine is heavy, please consider the weight of the machine when installing.
• We recommend that you install it on the ground.
• When installation: the machine must be 10cm away from the wall, in case the machine needs to be installed against the wall, the wall must be fire resistant, can not burn, and the left and right sides of the non-combustible are more than 10cm.
• The installation position should be in a well-ventilated place, and the exhaust fan should be installed to ensure that the steam and the combustion exhaust gas are discharged during the work process.
• After the installation of the machine, must be kept stable, horizontal placement can not be tilted, also can not be shaken when used.
• Use the gas with the permission of the gas supplier first, and verify that the supplied gas is consistent with the gas used in the future.
• Do not use other gas not conforming with the machine as fuel and high-pressure regulator. (This machine is only suitable for using the low-pressure control valve.)
• The used voltage of the equipment must comply with the rated voltage (do not use other power sources that do not conform to the machine)

Connect of the gas

• A quick-cut air valve must be installed before installing the machine and must be located near the machine.
• Make sure the machine is the same type of gas connected. If not, do not connect because the gas connection pipe is painted yellow.
• The pipes connected to the machine must be connected with suitable metal pipes.
• The machine shall be tested with LPG.
• If the pipe pressure is 10% higher than the rated pressure required by the machine, a regulating valve is required to ensure that the rated pressure is reached.
• After connection, test with soapy water or test whether there is air leakage at the test pipeline connection, ” do not use the fire source ignition

Electrical connection

• Users should install appropriate switches, fuses, and leakage protection near the equipment. sundries should not be stacked in front of the switch to facilitate operation.

• The furnace body is provided with equipotential grounding bolts, and the wire of not less than 1.5mm 2 copper conductor shall be reliably connected with the ground wire conforming to the safety regulations.
  After the installation, check whether the wiring is loose, whether the air pressure is normal, and whether the safe connection is reliable.

• The temperature adjustment range of the equipment baking furnace is between 50 and 330℃, and the recommended normal use temperature is between 180 and 250℃.

Precautions

• Do not put inflammable items (such as towels, etc.) in any position on the furnace surface, otherwise, it may cause combustion and fire accidents.
• After using it, the gas valve should be closed immediately.
• If air leakage is found, the gas valve should be closed immediately, open the window to strengthen ventilation. Do not switch the power supply and electric system to be used after maintenance.
• During transportation, the stove shall be small and not inverted to prevent damage to the product shell and interior.
• Inflammable and explosive articles should not be stored near the installation position, the ambient temperature is lower than 45℃, and the relative humidity is below 85%.

Special remarks: warn

• This product must be operated by a trained chef.
• Can not be disassembled or modified.
• Disassembly and modification of the products can lead to serious accidents.
• Before cleaning, remove the plug and cut off the power supply.
• When cleaning, do not sprinkle water directly on the product.
• Water will conduct electricity, and the product may cause electric shock accidents due to electricity leakage.
• Do not tap the product or place heavy objects on the product.
• Abnormal operation will cause equipment damage and danger.
• High temperatures can cause burns.
• In the process of work and before and after, due to the high-temperature relationship, do not directly contact the box with your hands, especially in the high-temperature area.
• Do not use the power supply (gas) other than the product-label power supply.
• Do not use the power supply knife that does not meet the safety standards and quickly cut off the gas source valve.

pay attention to it!

• When the minefield is closed, the power switch should be disconnected as soon as possible.
• Can avoid the electrical damage caused by lightning strikes.
• It is forbidden to use hard and sharp objects to destroy the furnace body surface and enamel surface.
• After the work is finished, close the power supply knife and quickly cut off the gas source valve.
• Circuit installation and maintenance must be carried out by qualified professional engineering personnel.
• If the power cord is damaged, it must be replaced by the manufacturer or its maintenance department, or similar professional personnel to avoid danger.

Maintenance

• Clean the burner and basin regularly (once daily day)
• If not used for a long time, use the cloth coated with gasoline, clean the stainless steel surface, and put it in a well-ventilated place.
• Clean the stainless steel surface with warm soapy water every day and rinse thoroughly (do not rinse the equipment directly with a water gun).
• When cleaning equipment, do not use cleaners, brushes, or scraper tools containing wear substances to clean the stainless steel surface, as residual iron scraps can cause rust.
• Wipe according to the satin direction, do not use products containing chlorine (bleach, hydrochloric acid, etc.) to clean the steel surface, even if these products have been diluted, do not use them.
• This product cannot be washed directly out with water.
• Do not use corrosive substances (e. g. potassium chloride) to clean the ground under the equipment.
• To clean the dirt on the burner and baffle in the furnace regularly (recommended once a week)
• Do not change the ventilation space required for burning the equipment.
• After daily work, the furnace body surface and the power cord can be scrubbed with a wet towel without corrosive cleaner.
• It is strictly prohibited to wash directly with water to prevent water infiltration, damage the electrical performance, and cause electricity safety accidents.
• If not used at any time, close the temperature controller and power switch with the quick cut-off air source valve.
• When not used for a long time, the stove should be cleaned and placed in a well-ventilated and no-corrosive gas warehouse.
• Clean the stainless steel surface regularly and properly to prevent surface oxidation and chemical damage to the machine.
• Clean before use, cut off the power supply, scrub with a wet towel without corrosive detergent, and do not directly sprinkle water on the product.

Direction for use

Upper iron plate furnace

• Turn the knob counterclockwise to the “★ ” position, press the knob to the bottom, and constantly press the electronic lighter to ignite the low-fire burner (fire). Press the knob down for 20 seconds; observe the fire burner (flame).
• When releasing the knob, the fire burner (flame) is ignited; if not, repeat until it is ignited. If the stove is not used for a long time or used for the first time, it may have a little longer firing time (about two to three minutes), which is a normal phenomenon.
• When the small fire burner (flame) is lit, then rotate the knob counterclockwise to the maximum flame position, “00” is the maximum flame, to ignite the main burner, it can be used.
• (To set the flame to the minimum, rotate counterclockwise to the minimum flame position, and “0” is the minimum flame.
• After use, close the main burner: rotate the knob from the maximum flame or minimum flame position to the “★ ” position to close the main burner.
• Turn off the low fire burner (fire): rotate the knob from the “★ ” position to the “● ” position to close the small fire burner.
• Note: Every time you rotate the knob, press the knob a little and rotate.
• Because there is gas storage in the furnace, the internal gas needs to be discharged during the first use, and the exhaust time may be longer about three to five minutes.
• Exhaust method: Turn the knob from off, counterclockwise to the “★ ” position and press the knob down for about three to five minutes.

Lower gas baking oven:

• position and press the knob to the bottom while constantly pressing the electronic burner to ignite the fire burner (fire). Press the knob down for 20 seconds; when releasing the knob, the low fire burner (flame) must be lit; if not, repeat this.
• (In an emergency, rotate the knob to the “★ ” position and press to the bottom, through the lower monitoring mouth of the furnace, light the small fire burner with a lighter, so that the manual ignition can ignite the small fire burner).
• If the stove is not used for a long time or used for the first time, the ignition time may be a little longer, about two to three minutes, which is a normal phenomenon.
• Turn the knob counterclockwise to the “C” position point burner and then to the desired temperature position to reach the desired temperature Degree, then it can be used.
• This equipment is equipped with a temperature regulating valve, which can automatically temperature the oven.
• After use, close the main burner: rotate the knob clockwise to the “★ ” position to close the main burner. Turn off the low fire burner (fire): rotate the knob from the “★ ” position to the “● ” position to close the small fire burner.
• Close the quick-cut-off air supply valve without using this machine.
• Note: Every time the knob is rotated, press the rotation slightly, and then rotate.
• The first use of the need to release the internal air, the release time may be longer, about three to five minutes.
• Passing method: Turn the knob from the off state, press counterclockwise to the “★ ” position, and press the knob down for about three to five minutes.

Daily inspection

• Check the machine status before and after use every day

Before use

• Is the machine tilted?
• Is the power cord aged, cracked, or broken?
• Is the control panel so damaged?

in use

• Is there a burnt bad smell, a bad smell?
• Can the temperature control be heated at the same time?
• Is the temperature out of control or leakage leakage?

warn!

• Routine inspections must be performed frequently.
• Check the product regularly to prevent serious accidents.
• If you feel that the circuit and machine are faulty, stop using them.
• Inform the professional and technical personnel for inspection and repair as soon as possible.
• If the product fails and the user cannot be eliminated, we can contact our factory or dealer to solve the problem and repair it free within half a year after sale.
• Where not according to the instructions for the wiring, improper use, transportation collision, and other damage, need to replace the parts of the product, the factory only recovers the parts fee.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>