Savio TWS-09 Bluetooth Earphones User Manual
- October 30, 2023
- Savio
Table of Contents
Bluetooth earphones
model: TWS-09
User manual
TWS-09 Bluetooth Earphones
Thank you for choosing Savio product!
If our product meets your expectations, share your opinion with other people
on the portal ceneo.pl, social media or on the website of the store where you
made the purchase. If you want to show our device on SAVIO Facebook Page, we
will be very pleased.
If there is something that we could improve on our products, please write to
us at [email protected]
Thanks to your feedback, we will be able to better adapt the product to your
expectations.
Before starting the use of purchased device it is recommended to read the
whole manual.
Product diagram
- Multi-function touch button
- Microphone
- Docking station / power bank
- Charging USB-C socket in power bank
- Signaling diode of power bank
- LED indicator on earphones
Charging device
2.1 Charging the earphones and power bank from an external power source.
2.1.1 Connect the USB-C cable to the charging socket in the power bank.
2.1.2 Insert the earphones into the dock (the diode placed on the front side
of power bank will blink in green color informing about power bank charging).
When earphones are discharged, the diodes on earphones will light up in red
color and charging will
start.
2.1.3 If the power bank is fully charged, green diode will light up steadily.
When earphones are fully charged the diode will turn off. Earphones are ready
to use.
2.2 Charging the earphones using the built-in power bank.
2.2.1 Insert the earphones into the power bank dock.
2.2.2 The power bank diodes will light up green and the earphones will light
up red to indicate charging.
2.2.3 If the earphones are fully charged, the red backlight turns off, the
earphones are ready to use.
ATTENTION!
Before charging the earphones for the first time, remove the protective
stickers located on the charging pins (down part of the earphone).
Earphones pairing:
3.1 Take out the earphones from power bank, the earphones will automatically
power on, earphones diodes will start blinking in green and red color
informing that the earphones are ready to pair with smartphone.
3.2 Turn on the Bluetooth in the device (e.g. smartphone), choose SAVIO TWS-09
earphones from Bluetooth devices, then pair them. If the headphones had
already been paired with the device, they will be connected automatically.
After proper connection of the earphones the diodes will stop blinking.
3.3 Earphones are ready to use. The notification light on the earphones will
flash green every 5 seconds, informing about a successful connection.
Touch control function
| Left earphone (0| Right earphone ( R Rj
---|---|---
Take / End a call| Double press
Rejecting an incoming call| Press and hold (per 2 s)
Play / Pause| Double press
Next song| Press and hold (for 2 s)|
Previous song| | Press and hold (for 2 s)
Volume increase| | Fast press
Volume decrease| Fast press|
Turn ON Gpogle Assistant I Siri| | Triple press
Restart earphones
Take out the earphones from power bank and turn off Bluetooth function in your
smartphone.
Press touch button (with diode blinking green- red color) on the master
earphone five times. After proper restart process, diodes on both earphones
will light on orange-green color.
Package content
- Wireless earphones
- USB-A – USB-C charging cable
- Docking station / power bank
- User manual
- Additional silicone pads: S, M, L sizes
Technical specification
- Bluetooth version: 5.1
- Supported Bluetooth profile: HSP, HFP, A2DP, AVRCP
- Total working time: up to 32 h (with use of power bank)
- Earphones working time on single charging cycle: up to 8 h
- Frequency response: 20 Hz – 20 kHz
- Frequency bands in which the radio equipment operates: 2400 – 2483.5 MHz
- Maximum radio-frequency power transmitted in the frequency band in which the radio equipment operates: 4 dBm
- Impedance: 16 Ω
- Microphone senility: -42 ± 1 dB
- IPX waterproof rating: IPX5
- Built-in HD microphone: yes
- Standby time: up to 120 h
Safety conditions
- Use this device as intended.
- Incorrect use of the device may damage the device.
- For charging the power bank it is highly recommended to use 1 A charger, or charge it from a USB port in the computer.
- Independent repairs and modification results in automatic loss of the warranty.
- Hitting or dropping the device could cause damage of the device.
- The device should be used in dry area, the device should be protected from water and high humidity.
Information for customers and contractors and communication regarding
complaints:
Pursuant to Article 13 section 1 and 2 of the General Data Protection
Regulation (EU) 2016/679 of the European Parliament and of the Council of 27
April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp.
z o.o., with its registered seat at ul. Morrow 81; 35323 Rzeszow becomes the
Administrator of your personal data. The Specialist for General Data
Protection (SODO) can be contacted in writing to: SODO, Elmar Sp. z o.o., ul.
Morrow 81; 35-323 Rzeszow, via e-mail address:
[email protected], and by phone at +48 (17) 854 98 14.
Your personal data will be processed in order to perform the contract, in
accordance with Article 6(1)(b) of the aforementioned regulation, to the
extent resulting from tax laws and financial regulations. Recipients of your
personal data include entities authorized by legal regulations to obtain
personal data as well as processing entities providing services to Elmar Sp. z
o.o. Your personal data will be stored on the basis of Administrator’s
legitimate interest. You have the right to access your data, and the right to
rectify, delete or limit processing of your data. You have the right to lodge
a complaint to the supervisory body if you believe that the processing
violates the GDPR. The provision of personal data is voluntary, however, a
failure to provide such data may result in a refusal to conclude or in
termination of a contract. Your personal data will not be subjected to
automated decision making, including profiling referred to in Article 22
section 1 and 4 of the GDPR of April 27, 2016.
Information of the utilization of electrical and electronic equipment
This symbol indicates that electrical appliances should not be discarded with
other household waste. Used equipment should be handed over to a local
collection po- int for this type of waste or to a recycling center. Please
contact your local authorities for information about disposal methods
available in your area. Waste electrical equipment may contain hazardous
substances (e.g. mercury, lead, cadmium, chromium, phthalates) which can get
into air, soil and groundwater when leaking from used appliances.
Environmental pollution with these substances leads to their bioaccumulation,
causing lesion of disease in living organisms, which would pose a risk to
human and animal health or life. Households may contribute to environmental
protection by proper waste collection. In such way, hazardous substances from
the equipment are neutralized and valuable secondary raw materials are reused
for production of new equipment.
Warranty
The warranty covers a period of 24 months. Independent repairs and modifications result in automatic loss of the warranty. Warranty card is available for download on our website: www.savio.net.pl/en/service
PRODUCER:
Elmar Sp. z o.o.
ul. Morrow 81
35-323 Rzeszow
www.savio.net.pl
References
- Ceneo - porównanie cen, sklepy, perfumy, agd, rtv, komputery
- Strona główna - Savio
- Do pobrania - Savio
- Do pobrania - Savio
- Strona główna - Savio
- Serwis i wsparcie - Savio